Grain size effect on behaviour and microstructure of a warm deformed Ti-IF steel

The effect of grain size on the deformation behaviour in the fenite region of a Titanium stabilized Interstitial Free steel was investigated by hot torsion. The initial work hardening regime is followed by a softening regime where a broad peak stress develops. The peak stress and the stress at final strain were relatively insensitive to grain size. However, at low values of the Zener-Hollomon parameter, the strain to the peak stress was strongly dependent on the grain size. A series of microstructural parameters were examined to explain these observations.

Grain size effect on the warm deformation behaviour of a Ti-IF steel

The effect of grain size on the warm deformation behaviour of a titanium stabilized interstitial free (IF) steel was investigated using hot torsion. The initial work hardening regime is followed by the development of a broad stress peak after which work softening occurs. The hypothetical saturation stress (Estrin–Mecking model) and the stress at final strain were relatively insensitive to grain size. However, the strain to the peak stress was strongly dependent on the grain size at low values of the Zener–Hollomon parameter. A simple phenomenological approach, using a combined Estrin–Mecking model and an Avrami type equation, was used to model the flow curves. The hypothetical saturation stress, the stress at final strain and the strain to peak stress were modelled using three different hyperbolic sine laws. A comparison with independent data from the literature shows that the apparent activation energy of deformation determined in this work (Q=372 kJ/mol) can be used to rationalize the steady-state stress in compression data found in the literature.

Maternal 25-hydroxyvitamin D concentration and offspring birth size : effect modification by infant VDR genotype

Background/Objectives: We tested the hypothesis that the relationship between maternal 25-hydroxyvitamin D (25-(OH)D) and offspring birth size differs according to offspring vitamin D receptor (VDR) genotype (Apa1, Bsm1, Fok1 or Taq1).

Subjects/Methods: Mothers of 354 singleton babies had serum 25-(OH)D concentration measured at 28–30 weeks of gestation and consented to measurement of their babies soon after birth. DNA was extracted from the babies’ Guthrie cards.

Results: There was evidence of effect modification by infant FokI genotype. Babies of deficient mothers had lower birth weight with FF or Ff, but not ff genotype (P-value for interaction after adjustment for potential confounding factors=0.02), but thicker subscapular and suprailiac skinfolds with ff, but not FF or Ff genotype (P=0.008 and 0.02, respectively). Sample size was insufficient to investigate effect modification by the other VDR polymorphisms.

Conclusions: These preliminary findings suggest that studies of maternal vitamin D status and birth size may need to take VDR genotype into account.

Carbon dioxide emission mitigation and disclosures : the size effect

The analysis provided in this research ainis to improve the understanding of the structure and nature of organisations in the transport industry so that policy-makers and researchers can be informed about the impact of size of an organisation on its preparation for the transition to a low carboneconomy. Descriptive and infetential are calculated to aid in understanding how organisations manage their C02mitigation action and carbon emission disclosure. It is noted that small and medium sized companies appear to be less financially capable of responding to the challenges of transiting to a low carbon environment that large companies.

Size effect on the tensile strength of fine-grained copper

We considered the effect of the thickness of copper sheet on its tensile strength. A model in which the strength of surface grains is governed by dislocation image forces, while that of interior grains is determined by dislocation cell structure, was proposed. Using a rule of mixtures, the dependence of strength on the specimen thickness was calculated. A master curve representing the calculated dependence of normalized strength on the ratio of sheet thickness to grain size was confirmed by experiment.

Effect of grain size on the deformation and dynamic recrystallization of mg-3AI-1Zn

The influence of grain size on the deformation of extruded Mg-3Al-1Zn tested in tension at temperatures between room temperature and 300°C is investigated. The results enable estimation of the deformation conditions for the transition from slip to twinning dominated flow and for the initiation and completion of dynamic recrystallization. A map illustrating these critical parameters is constructed and it is shown that the operating conditions of the common wrought processes straddle key transitions in microstructure behaviour.

Effect of grain size on the performance of extruded magnesium alloy tubes in three-point bending

The performance of extruded AZ31, AZ61 and AM-EX1 tubes was examined in three-point bending. Different extrusion temperatures were used to investigate the effect of grain size on the load-carrying capacity, energy absorption and fracture propensity of the tubes. Results showed that while the peak load increased with a smaller average recrystallised grain size, the retention of large elongated un-recrystallised grains in the microstructure reduced the load. The presence of the large elongated grains also appeared detrimental to the ability of the tube to deform before fracture.

Effect of company size on occupational health and safety

It is mandatory in all Australian jurisdictions for construction companies to provide a safe working environment for their workers and sub-contractors. Consequently, occupational health and safety (OHS) is a major issue for construction companies mainly due to the fear of prosecution. The introduction of zero tolerance by the Victorian government “WorkCover Authority” in 1999 provided increased legislative OHS standards for the construction industry. This has placed an increased burden on construction companies especially small firms that are not in a position of financial strength. This research is based on benchmarking study of OHS performance of 44 construction companies in
Victoria, Australia. The results show that the size of the company is a major contributing factor to their OHS performance. Small companies employing less than 25 employees have comparatively low levels of OHS performance compared to larger firms. Company size is a limiting factor that impacts on the ability of small firms to implement comprehensive OHS plans. This research calls into question that notion that increasing legislative requirements will improve OHS outcomes.

Sizing up the effect of portion size on consumption: A meta-analytic review

Food marketing is facing increasing challenges in using portion size (e.g., “supersizing”) as a marketing tool.Marketers have used portion size to attract customers and encourage purchase, but social agencies areexpressing concern that larger portion sizes encourage greater consumption, which can cause excessiveconsumption and obesity. This article addresses two questions that are central to this debate: (1) How much effectdoes portion size have on consumption? and (2) Are there limits to this effect? A meta-analytic review reveals that,for a doubling of portion size, consumption increases by 35% on average. However, the effect has limits. Anextended analysis shows that the effect of portion size is curvilinear: as portions become increasingly larger, theeffect diminishes. In addition, although the portion-size effect is widespread and robust across a range of individualand environmental factors, the analysis shows that it is weaker among children, women, and overweightindividuals, as well as for nonsnack food items and in contexts in which more attention is given to the food beingeaten.

A rationale for the strong dependence of mechanical twinning on grain size

In metals that yield as a consequence of mechanical twinning, the yield stress is a function of the grain size in much the same way as it is for dislocation glide. However, the sensitivity to grain size is typically greater. The intent of the present communication is to show that this can be understood, at least in part, in terms of a size effect that accompanies twinning. Some confirmatory data from a magnesium alloy are presented.

Acceleration of the super bainite transformation through a coarse austenite grain size

The effect of austenite grain size on the kinetics of the isothermal bainitic transformation in a high-carbon super-bainitic steel was investigated. Experimental results showed that the transformation of super bainite was accelerated by a coarse austenite grain size. This is because while coarse austenite grains provide less nucleation sites, it is beneficial for bainite sheaf growth. Meanwhile, there is a critical austenite grain size below which there is a distinct grain size effect and above which it is not evident. © 2014 Elsevier B.V.

Effect of prolonged bed rest on the anterior hip muscles

Prolonged bed rest and inactivity is known to cause muscular atrophy with previous research indicating that muscles involved in joint stabilisation are more susceptible. The anterior hip muscles are important for hip joint function and stability but little is known about the effects of prolonged inactivity on their function. This study investigated the effect of prolonged bed rest on the size of the anterior hip muscles and their pattern of recovery. The effect of resistive vibration exercise (RVE) as a countermeasure to muscle atrophy was also investigated. 12 male participants, randomly assigned to either a control or an exercise group, underwent 8 weeks of bed rest with 6 months follow-up. Changes in muscle cross-sectional area (CSA) of the iliacus, psoas, iliopsoas, sartorius and rectus femoris muscles were measured by magnetic resonance imaging at regular intervals during bed rest and recovery phases. CSAs of iliopsoas and sartorius decreased at the hip joint (p<0.05) during bed rest but iliacus, psoas, and rectus femoris CSAs were unchanged (p>0.05). No significant difference was found between the two groups for all muscles (all p>0.1), suggesting inefficacy of the countermeasure in this sample. These findings suggest that prolonged bed rest can result in the atrophy of specific muscles across the hip joint which may affect its stability and function.