Towards integrated anti-microbial capabilities: Novel bio-fouling resistant membranes by high velocity embedment of silver particles

Biofilm formation on membranes during water desalination operation and pre-treatments limits performance and causes premature membrane degradation. Here, we apply a novel surface modification technique to incorporate anti-microbial metal particles into the outer layer of four types of commercial polymeric membranes by cold spray. The particles are anchored on the membrane surface by partial embedment within the polymer matrix. Although clear differences in particle surface loadings and response to the cold spray were shown by SEM, the hybrid micro-filtration and ultra-filtration membranes were found to exhibit excellent anti-bacterial properties. Poly(sulfone) ultra-filtration membranes were used as for cross-flow filtration of Escherichia coli bacteria solutions to investigate the impact of the cold spray on the material[U+05F3]s integrity. The membranes were characterized by SEM-EDS, FT-IR and TGA and challenged in filtration tests. No bacteria passed through the membrane and filtrate water quality was good, indicating the membranes remained intact. No intact bacteria were found on hybrid membranes, loaded with up to 15. wt% silver, indicating the treatment was lysing bacteria on contact. However, permeation of the hybrid membranes was found to be reduced compared to control non-modified poly(sulfone) membranes due to the presence of the particles across the membrane material. The implementation of cold spray technology for the modification of commercial membrane products could lead to significant operational savings in the field of desalination and water pre-treatments.

Amine enrichment of thin-film composite membranes via low pressure plasma polymerization for antimicrobial adhesion

Thin-film composite membranes, primarily based on poly(amide) (PA) semipermeable materials, are nowadays the dominant technology used in pressure driven water desalination systems. Despite offering superior water permeation and salt selectivity, their surface properties, such as their charge and roughness, cannot be extensively tuned due to the intrinsic fabrication process of the membranes by interfacial polymerization. The alteration of these properties would lead to a better control of the materials surface zeta potential, which is critical to finely tune selectivity and enhance the membrane materials stability when exposed to complex industrial waste streams. Low pressure plasma was employed to introduce amine functionalities onto the PA surface of commercially available thin-film composite (TFC) membranes. Morphological changes after plasma polymerization were analyzed by SEM and AFM, and average surface roughness decreased by 29%. Amine enrichment provided isoelectric point changes from pH 3.7 to 5.2 for 5 to 15 min of plasma polymerization time. Synchrotron FTIR mappings of the amine-modified surface indicated the addition of a discrete 60 nm film to the PA layer. Furthermore, metal affinity was confirmed by the enhanced binding of silver to the modified surface, supported by an increased antimicrobial functionality with demonstrable elimination of E. coli growth. Essential salt rejection was shown minimally compromised for faster polymerization processes. Plasma polymerization is therefore a viable route to producing functional amine enriched thin-film composite PA membrane surfaces.

Buxton silver gum reserve: using geographic information systems to investigate historic change in site integrity

Eucalyptus crenulata is a rare species known from only two populations. The Buxton Silver Gum Reserve was set aside in 1978 for the conservation of the species, but this objective may be compromised by changes in the integrity of the landscape immediately surrounding the Reserve. A time sequence of aerial photos and Geographic Information Systems technology has been used to identify patterns of landscape change, and aid in determining appropriate management strategies to minimize negative impacts caused by landscape fragmentation and habitat exposure

Some morphometric and biochemical features of ready-to-migrate silver and pre-migratory yellow stages of the shortfin eel of south-eastern Australian waters

The mean total length (L_T), mass and age of ready to migrate female silver shortfin eels Anguilla australis from the Hopkins River estuary and the mouth of the Merri River in south-eastern Australia, were 83·2 ± 1·2 cm, 1051 ± 51 g, and 17·2 ± 1·79 years, respectively. The eye index (I_E) of the silver shortfin eels was < 5·2 (mean 7·64 ± 0·29) and differed significantly from that of the yellow shortfin eels collected from two other sites. The I_E increased with L_T (mm) and was related by log I_E= 2·656 log L_T6·925. The per cent moisture, protein and ash content of the liver of silver shortfin eels was significantly lower than in yellow shortfin eels, but lipid content was significantly higher in the former (35·5 ± 2·0%). The mean mass μg mg lipid ‾) of saturates (230·4 ± 2·6 v. 181·7 ±2·6), monoenes (367·4 ± 6·3 v. 290·8 ± 8·9) and PUFA (177·3 ± 5·3 v. 159·7 ± 4·6) in muscle was significantly higher, and the great majority of individual fatty acids was found also in higher quantities in silver shortfin eels. In the liver, the PUFA found in the highest quantity was 22:6n-3, except in shortfin eels from Hopkins River estuary, and the amount of 18:2n-6 in the liver of silver shortfin eels was significantly higher than that in yellow shortfin eels but the reverse was true of 20:4n-6. In both muscle and liver tissues the saturate 16:0 and the monoene 18:ln-9 collectively accounted for >50% of all the fatty acids in the lipid.

Improved membranes for the extraction of heavy metals

This work presents a series of experimental tests on new practical approaches in membrane design to improve extraction capacity and rate. We chose an extraction system involving Aliquat 336 as the extractant and Cd(II) as the metal ion to be extracted to demonstrate these new approaches. The core element in the new membrane assembly was the extractant loaded sintered glass filter. This membrane assembly provided a large interface area between the extractant and the aqueous solution containing metal ions. By recycling the aqueous solution through the membrane assembly, the extraction rate was significantly improved. The membrane assembly also offered good extraction capacity.

Pieces of silver : examples of the economic impact and management of the silver gull (Larus novaehollandiae) in Melbourne, Australia

Like a number of gull species, the silver gull Larus novaehollandiae has expanded its population in response to human food subsidy. The major anthropogenic food source is food waste at rubbish tips. Other sources of human food waste are also exploited. Many problems result from the activities of these birds, including human health and safety, economic impacts, and effects on the conservation of other species. My study examines aspects of the economic impacts of the silver gull on the human community of the Greater Melbourne Area comprising approximately 4065 km2 (1569 square miles). My data collection method involves identifying sites where problems have been experienced and completing questionnaires during face to face interviews with the managers of those sites. Data collected at this early stage of the study demonstrate that there are significant, quantifiable economic impacts associated with the superabundance of the silver gull in this area. Other impacts, such as reduced amenity and potential health hazards are equally real but more difficult to quantify. Costs include damage to structures and products, damage prevention measures, and loss of production. Information about the costs of these problems will be presented to the relevant landfill management authorities to encourage them to consider alternative means of disposing of putrescible waste, rather than by open landfill disposal, because even current best practice management of open landfill sites (rubbish tips) provides ample opportunity for silver gulls and certain other bird species to exploit this food source. Controlling access by the silver gull to food at rubbish tips would be an important first step in managing the population of this species.

Polypyrrole-coated electrospun nanofibre membranes for recovery of Au(III) from aqueous solution

In this paper, for the first time, polypyrrole-coated electrospun nanofibre mats have been used as separation membranes to electrolessly recover Au from aqueous [Au(III)Cl₄]− solutions, based on a continuous-flow membrane separation process. With a [Au(III)Cl₄]− solution passing through the nanofibre membrane, the Au(III) ions were converted into elemental Au. The gold recovered was deposited on the nanofibre membranes in the form of Au particles, as confirmed by EDX and XPS measurements. It has been found that the polypyrrole-coated electrospun nanofibres are good candidate membrane material for the recovery of Au, and the recovery efficiency is affected by the membrane thickness, the permeate flux rate and the initial [Au(III)Cl₄]− concentration.

Tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence enhanced by silver nanoparticles

Mixtures of silver(I) and citrate that are used to produce silver nanoparticles evoke intense chemiluminescence with tris(2,2'-bipyridyl)ruthenium(II) and cerium(IV), which can be exploited for the determination of citrate ions and other analytes over a wide concentration range.

Electrospun nanofibre membranes as wound dressing materials

An effective wound dressing is not only able to protect the wound area from its surroundings to avoid infection and dehydration, but also to speed up the healing process by providing an optimum microenvironment for healing, removing any excess wound exudates, and allowing continuous tissue reconstruction. In this study, two biodegradable polymers, polycaprolactone (PCL) and polyvinyl alcohol (PVA), were used to electrospin nanofibre membranes. The wound dressing performances of these two membranes were compared with the wound dressing performances of protein coated membranes and conventional non-woven cotton wound dressings. In addition, fibre morphology, porous structural property, mechanical properties of the nanofibre membranes, and their drainage capacity and wound skin histology were examined.

Thermodynamics of lipophilic drug binding to intestinal fatty acid binding protein and permeation across membranes

Intestinal fatty acid binding protein (I-FABP) is present at high levels in the absorptive cells of the intestine (enterocytes), where it plays a role in the intracellular solubilization of fatty acids (FA). However, I-FABP has also been shown to bind to a range of non-FA ligands, including some lipophilic drug molecules. Thus, in addition to its central role in FA trafficking, I-FABP potentially serves as an important intracellular carrier of lipophilic drugs. In this study we provide a detailed thermodynamic analysis of the binding and stability properties of I-FABP in complex with a series of fibrate and fenamate drugs to provide an insight into the forces driving drug binding to I-FABP. Drug binding and selectivity for I-FABP are driven by the interplay of protein−ligand interactions and solvent processes. The Gibbs free energies (ΔG°) determined from dissociation constants at 25 °C ranged from −6.2 to −10 kcal/mol. The reaction energetics indicate that drug binding to I-FABP is an enthalpy−entropy driven process. The relationship between I-FABP stability and drug binding affinity was examined by pulse proteolysis. There is a strong coupling between drug binding and I-FABP stability. The effect of an I-FABP protein sink on the kinetics and thermodynamics of tolfenamic acid permeation across an artificial phospholipid membrane were investigated. I-FABP significantly decreased the energy barrier for desorption of tolfenamic acid from the membrane into the acceptor compartment. Taken together, these data suggest that the formation of stable drug−I-FABP complexes is thermodynamically viable under conditions simulating the reactant concentrations likely observed in vivo and maybe a significant biochemical process that serves as a driving force for passive intestinal absorption of lipophilic drugs.