Monitoring batch treatment inhibitor performance continuously using electrochemical noise analysis

Electrochemical noise analysis (ENA) was used to monitor continuously the formation and deterioration processes of a commercial batch treatment inhibitor film of the type used for protecting against CO₂ corrosion in oilfields; ENA was shown to be able to follow effectively the formation and deterioration processes of batch treatment inhibitor films. As an inhibitor film formed, the current noise amplitude decreased rapidly and the noise resistance R_n, which is deducible from the voltage and current noise records, was found to increase sharply. Conversely, as the inhibitor film deteriorated, the current noise amplitude increased rapidly and R_n decreased rapidly. In the corrosion inhibition system studied, the noise resistance was confirmed to be similar to the linear polarisation resistance. Based on the calculation of R_n on a continuous basis, a technique is proposed to study fast corrosion processes.

Improved 2D‐HPLC of red wine by incorporating pre‐process signal‐smoothing algorithms

Twomultidimensional HPLC separations of an Australian red wine are presented, >70% of the available separation space was used. A porous graphitic carbon (PGC) stationary phase was used as the first dimension in both separations with both RP core–shell and hydrophilic interaction chromatography fully porous columns used separately in the second dimension. To overcome peak analysis problems caused by signal noise and low detection limits, the data were pre-processed with penalised least-squares smoothing. The PGC × RP combination separated 85 peaks with a spreading angle of 71 and the PGC × hydrophilic interaction chromatography separated 207 peaks with a spreading angle of 80. Both 2D-HPLC steps were completed in 76 min using a comprehensive stop-and-go approach. A smoothing step was added to peak-picking processes and was able to greatly reduce the number of false peaks present due to noise in the chromatograms. The required thresholds were not able to ignore the noise because of the small magnitude of the peaks; 1874 peaks were located in the non-smoothed PGC × RP separation that reduced to 227 peaks after smoothing was included.

New enhancements to cut, fade, and dissolve detection processes in video segmentation

We present improved algorithms for cut, fade, and dissolve detection which are fundamental steps in digital video analysis. In particular, we propose a new adaptive threshold determination method that is shown to reduce artifacts created by noise and motion in scene cut detection. We also describe new two-step algorithms for fade and dissolve detection, and introduce a method for eliminating false positives from a list of detected candidate transitions. In our detailed study of these gradual shot transitions, our objective has been to accurately classify the type of transitions (fade-in, fade-out, and dissolve) and to precisely locate the boundary of the transitions. This distinguishes our work from other early work in scene change detection which tends to focus primarily on identifying the existence of a transition rather than its precise temporal extent. We evaluate our improved algorithms against two other commonly used shot detection techniques on a comprehensive data set, and demonstrate the improved performance due to our enhancements.

Application of power functions to chromatographic data for the enhancement of signal to noise ratios and separation resolution

Chromatographic detection responses are recorded digitally. A peak is represented ideally by a Guassian distribution. Raising a Guassian distribution to the power ‘n’ increases the height of the peak to that power, but decreases the standard deviation by √n. Hence there is an increasing disparity in detection responses as the signal moves from low level noise, with a corresponding decrease in peak width. This increases the S/N ratio and increases peak to peak resolution. The ramifications of these factors are that poor resolution in complex chromatographic data can be improved, and low signal responses embedded at near noise levels can be enhanced. The application of this data treatment process is potentially very useful in 2D-HPLC where sample dilution occurs between dimension, reducing signal response, and in the application of post-reaction detection methods, where band broadening is increased by virtue of reaction coils. In this work power functions applied to chromatographic data are discussed in the context of (a) complex separation problems, (b) 2D-HPLC separations, and (c) post-column reaction detectors.

Sparse coding for improved signal-to-noise ratio in MRI

Magnetic Resonance images (MRI) do not only exhibit sparsity but their sparsity take a certain predictable shape which is common for all kinds of images. That region based localised sparsity can be used to de-noise MR images from random thermal noise. This paper present a simple framework to exploit sparsity of MR images for image de-noising. As, noise in MR images tends to change its shape based on contrast level and signal itself, the proposed method is independent of noise shape and type and it can be used in combination with other methods.

The effects of time pressure and experience on nurses' risk assessment decisions : a signal detection analysis

Background: Time pressure and, occasionally, suboptimal assessment decisions are features of nursing in acute care.

Objectives: To explore the effect of generic and specialist clinical experience on the ability to detect the need to take action in acute care and the impact of time pressure on nurses' decision-making performance.

Methods: Experienced acute care registered nurses (n = 241) were presented with 50 vignettes of real clinical risk assessments. Each vignette contained seven information cues. In response to these vignettes, nurses had to decide whether to intervene or not. The 26 vignettes were time limited and mixed randomly into the 50 cases. Signal detection analysis was used to establish nurses' performance, personal decision thresholds ([beta]), and their abilities (d') to distinguish a signal of clinical risk from the clinical noise of noncontributory information.

Results: Nurses had significantly lower d' and were significantly less likely to indicate intervening under time pressure. For ability-but not threshold-there was a significant interaction of time pressure and years of experience in acute care. With no time pressure, d' increased in line with years of experience. Under time pressure, there was no effect.

Discussion: Time pressure reduced nurses' ability to detect the need and the tendency to report intervening. Thus, there were more failures to report appropriate intervention under time pressure, and the positive effects of clinical experience were negated under time pressure. More and larger scale research on the effect on clinical outcomes of time pressured nursing choices is required.

Distributed audio network for speech enhancement in challenging noise backgrounds

This paper presents a new approach to enhance speech based on a distributed microphone network. Each microphone is used to simultaneously classify the input into either one of the noise types or as speech. For enhancing the speech signal a modified spectral subtraction approach is used that utilise the sound information of the entire network to update the noise model even during speech. This improves the reduction of the ambient noise, especially for non-stationary noise types such as street or beach noise. Experiments demonstrate the effectiveness of the proposed system.

Review: The preliminary study for the interpretation of electrochemical noise with continuous wavelet transform

Random fluctuations of the electrical quantities (electrode potential and cell current) in electrochemical systems commonly are referred to as electrochemical noise (ECN). The ECN signal for the corrosion of mild steel in reinforced concrete specimen was analyzed with the Continuous Wavelet Transform (CWT). The original signal was transformed into a time-frequency phase plane with colors representing the coefficients of the CWT. The signal shows a self-similarity structure in the phase plane. Through this way, the chaotic nature of corrosion process is manifested.

Neuron’s spikes noise level classification using hidden markov models

Considering that the uncertainty noise produced the decline in the quality of collected neural signal, this paper proposes a signal quality assessment method for neural signal. The method makes an automated measure to detect the noise levels in neural signal. Hidden Markov Models were used to build a classification model that classifies the neural spikes based on the noise level associated with the signal. This neural quality assessment measure will help doctors and researchers to focus on the patterns in the signal that have high signal to noise ratio and carry more information.

Biomedical signal filtering for noisy environments

 Luke's work addresses issue of robustly attenuating multi-source noise from surface EEG signals using a novel Adaptive-Multiple-Reference Least-Means-Squares filter (AMR-LMS). In practice, the filter successfully removes electrical interference and muscle noise generated during movement which contaminates EEG, allowing subjects to maintain maximum mobility throughout signal acquisition and during the use of a Brain Computer Interface.

Noise level classification for EEG using Hidden Markov Models

EEG signal is one of the most important signals for diagnosing some diseases. EEG is always recorded with an amount of noise, the more noise is recorded the less quality is the EEG signal. The included noise can represent the quality of the recorded EEG signal, this paper proposes a signal quality assessment method for EEG signal. The method generates an automated measure to detect the noise level of the recorded EEG signal. Mel-Frequency Cepstrum Coefficient is used to represent the signals. Hidden Markov Models were used to build a classification model that classifies the EEG signals based on the noise level associated with the signal. This EEG quality assessment measure will help doctors and researchers to focus on the patterns in the signal that have high signal to noise ratio and carry more information. Moreover, our model was applied on an uncontrolled environment and on controlled environment and a result comparison was applied.

An audio signal based model for condition monitoring of sheet metal stamping process

Tool condition monitoring is an important factor in ensuring manufacturing efficiency and product quality. Audio signal based methods are a promising technique for condition monitoring. However, the influence of interfering signals and background noise has hindered the use of this technique in production sites. Blind signal separation (BSS) has the potential to solve this problem by recovering the signal of interest out of the observed mixtures, given that the knowledge about the BSS model is available. In this paper, we discuss the development of the BSS model for sheet metal stamping with a mechanical press system, so that the BSS techniques based on this model can be developed in future. This involves conducting a set of specially designed machine operations and developing a novel signal extraction technique. Also, the link between stamping process conditions and the extracted audio signal associated with stamping was successfully demonstrated by conducting a series of trials with different lubrication conditions and levels of tool wear.

Characterising an ECG signal using statistical modelling: a feasibility study

For clinical use, in electrocardiogram (ECG) signal analysis it is important to detect not only the centre of the P wave, the QRS complex and the T wave, but also the time intervals, such as the ST segment. Much research focused entirely on qrs complex detection, via methods such as wavelet transforms, spline fitting and neural networks. However, drawbacks include the false classification of a severe noise spike as a QRS complex, possibly requiring manual editing, or the omission of information contained in other regions of the ECG signal. While some attempts were made to develop algorithms to detect additional signal characteristics, such as P and T waves, the reported success rates are subject to change from person-to-person and beat-to-beat. To address this variability we propose the use of Markov-chain Monte Carlo statistical modelling to extract the key features of an ECG signal and we report on a feasibility study to investigate the utility of the approach. The modelling approach is examined with reference to a realistic computer generated ECG signal, where details such as wave morphology and noise levels are variable.