The 'wimple' : rippled deformation of a fluid drop caused by hydrodynamic and surface forces during thin film drainage

It is well-known that hydrodynamic pressures in a thin draining liquid film can cause inversion of the curvature of a drop or bubble surface as it approaches another surface, creating a so-called “dimple”. Here it is shown that a more complicated rippled shape, dubbed a “wimple”, can be formed if a fluid drop that is already close to a solid wall is abruptly pushed further toward it. The wimple includes a central region in which the film remains thin, surrounded by a ring of greater film thickness that is bounded at the outer edge by a barrier rim where the film is thin. This shape later evolves into a conventional dimple bounded by the barrier rim, which then drains in the normal way. During the evolution from wimple to dimple, some of the fluid in the thicker part of the film ring flows toward the central region before eventually draining in the opposite direction. Although the drop is pressed toward the wall, the central part of the drop moves away from the wall before approaching it again. This is observed even when the inward push is too small to create a wimple.

Reducing electrowetting-on-dielectric actuation voltage using a novel electrode shape and a multi-layer dielectric coating

This paper presents design and fabrication of an electrowetting-on-dielectric (EWOD) device using a novel electrode shape and a multi-layer dielectric coating that reduce the actuation voltage of the device to less than 12.6 V. The fabrication of the EWOD electrodes is carried out in several steps including laser exposure, wet developing, etching, and stripping. A high-dielectric-constant multi-layer dielectric coating containing a 770 nm thick Polyvinylidene difluoride (PVDF) layer and a 1 µm thick Cyanoethyl pullulan (CEP) layer, is deposited on the EWOD electrodes for insulation. This multi-layer dielectric structure exhibits a high capacitance per unit area, and the novel electrode shape changes the actuation force at the droplet contact line reducing the voltage required to operate the device. In addition, an overlaying Teflon layer of 50 nm is placed on top of the dielectric structure to provide a hydrophobic surface for droplet manipulation. It is observed from the experiments that the electrode shape and the dielectric structure have contributed to the reduction of the actuation voltage of the EWOD device.

On the race of worms and patches: modeling the spread of information in wireless sensor networks

Sensor networks are a branch of distributed ad hoc networks with a broad range of applications in surveillance and environment monitoring. In these networks, message exchanges are carried out in a multi-hop manner. Due to resource constraints, security professionals often use lightweight protocols, which do not provide adequate security. Even in the absence of constraints, designing a foolproof set of protocols and codes is almost impossible. This leaves the door open to the worms that take advantage of the vulnerabilities to propagate via exploiting the multi-hop message exchange mechanism. This issue has drawn the attention of security researchers recently. In this paper, we investigate the propagation pattern of information in wireless sensor networks based on an extended theory of epidemiology. We develop a geographical susceptible-infective model for this purpose and analytically derive the dynamics of information propagation. Compared with the previous models, ours is more realistic and is distinguished by two key factors that had been neglected before: 1) the proposed model does not purely rely on epidemic theory but rather binds it with geometrical and spatial constraints of real-world sensor networks and 2) it extends to also model the spread dynamics of conflicting information (e.g., a worm and its patch). We do extensive simulations to show the accuracy of our model and compare it with the previous ones. The findings show the common intuition that the infection source is the best location to start patching from, which is not necessarily right. We show that this depends on many factors, including the time it takes for the patch to be developed, worm/patch characteristics as well as the shape of the network.

Kinematic and dynamic modeling of a robotic head with linear motors

Our present research focuses on kinematic and dynamic modeling of a 3-DOF robotic cutting head for the next generation of CNC machines. The robotic cutting head is one kind of parallel manipulator of 3-PUU type, which has a high flexibility of motion in three-dimensional space. The parallel manipulator consists of three linear servomotors, which drive three connecting rods independently according to the cutting strategy. Being a parallel manipulator, the robotic cutting head has higher stiffness and position accuracy; consequently, higher velocities and accelerations can be achieved. A very suitable application of this mechanism is as a cutting head of a precision machine tool for three-dimensional cutting problems.

The voltammetric reduction, deprotonation and surface activity of ruthenium photovoltaic sensitizers in acetone

The reductive voltammetry of the photovoltaic sensitizer [(H2-dcbpy)2Ru(NCS)2] (H2-dcbpy=2,2′-bipyridine-4,4′-dicarboxylic acid) and [(H3-tctpy)Ru(NCS)3]− (H3-tctpy=2,2′:6′,2″-terpyridine-4,4′,4″-tricarboxylic acid) has been investigated in acetone. Significant surface interactions at both platinum and glassy carbon electrodes occur at 0.6 V prior to the reversible potential expected for ligand-based reduction process of the fully protonated acids. The origin of the surface interactions are attributed to the acid–base behaviour of the compounds, combined with overall deprotonation and reduction to hydrogen, since repetitive cycling of the potential reveals well-defined reversible reduction processes in the negative potential range, resulting from formation of doubly deprotonated [(H-dcbpy−)2Ru(NCS)2]2− and singly deprotonated [(H2-tctpy−)Ru(NCS)3]2−, respectively. The extent of the surface interactions has been estimated by electrochemical quartz crystal microbalance and chronocoulometric measurements. Under certain conditions, a thick conducting polymer consisting of several hundred monolayers is formed.

Mapping and molecular modeling of S-adenosyl-L-methionine binding sites in N-methyltransferase domains of the multifunctional polypeptide cyclosporin synthetase

We employed a highly specific photoaffinity labeling procedure, using 14C-labeled S-adenosyl-L-methionine (AdoMet) to define the chemical structure of the AdoMet binding centers on cyclosporin synthetase (CySyn). Tryptic digestion of CySyn photolabeled with either [methyl-14C]AdoMet or [carboxyl-14C]AdoMet yielded the sequence H2N-Asn-Asp-Gly-Leu-Glu-Ser-Tyr-Val-Gly-Ile-Glu-Pro-Ser-Arg-COOH (residues 10644-10657), situated within the N-methyltransferase domain of module 8 of CySyn. Radiosequencing detected Glu10654 and Pro10655 as the major sites of derivatization. [carboxyl-14C]AdoMet in addition labeled Tyr10650. Chymotryptic digestion generated the radiolabeled peptide H2N-Ile-Gly-Leu-Glu-Pro-Ser-Gln-Ser-Ala-Val-Gln-Phe-COOH, corresponding to amino acids 2125-2136 of the N-methyltransferase domain of module 2. The radiolabeled amino acids were identified as Glu2128 and Pro2129, which are equivalent in position and function to the modified residues identified with tryptic digestions in module 8. Homology modeling of the N-methyltransferase domains indicates that these regions conserve the consensus topology of the AdoMet binding fold and consensus cofactor interactions seen in structurally characterized AdoMet-dependent methyltransferases. The modified sequence regions correspond to the motif II consensus sequence element, which is involved in directly complexing the adenine and ribose components of AdoMet. We conclude that the AdoMet binding to nonribosomal peptide synthetase N-methyltransferase domains obeys the consensus cofactor interactions seen among most structurally characterized low molecular weight AdoMet-dependent methyltransferases.

Superhydrophobic electrospun POSS-PMMA copolymer fibres with highly ordered nanofibrillar and surface structures

A POSS-PMMA copolymer has been synthesised by conventional free-radical polymerisation reaction. Uniform electrospun fibres from this copolymer showed a water contact angle as high as 1651 with a sliding angle as low as 61. For the first time, we found that the electrospun fibres had a bundled nanofibril secondary structure with an ordered POSS morphology on the fibre surface.

Investigation of the postcure reaction and surface energy of epoxy resins using time-of-flight secondary ion mass spectrometry and contact-angle measurements

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to investigate correlations between the molecular changes and postcuring reaction on the surface of a diglycidyl ether of bisphenol A and diglycidylether of bisphenol F based epoxy resin cured with two different amine-based hardeners. The aim of this work was to present a proof of concept that ToF-SIMS has the ability to provide information regarding the reaction steps, path, and mechanism for organic reactions in general and for epoxy resin curing and postcuring reactions in particular. Contact-angle measurements were taken for the cured and postcured epoxy resins to correlate changes in the surface energy with the molecular structure of the surface. Principal components analysis (PCA) of the ToFSIMS positive spectra explained the variance in the molecular information, which was related to the resin curing and postcuring reactions with different hardeners and to the surface energy values. The first principal component captured information related to the chemical phenomena of the curing reaction path, branching, and network density based on changes in the relative ion density of the aliphatic hydrocarbon and the C₇H₇O⁺ positive ions. The second principal component captured information related to the difference in the surface energy, which was correlated to the difference in the relative intensity of the C_xH_yN_z⁺ ions of the samples. PCA of the negative spectra provided insight into the extent of consumption of the hardener molecules in the curing and postcuring reactions of both systems based on the relative ion intensity of the nitrogen-containing negative ions and showed molecular correlations with the sample surface energy.

Pulsed plasma polymerization of hexamethyldisiloxane onto wool : control of moisture vapor transmission rate and surface adhesion

A new fabric with potential in medical textiles has been developed by application of a surface coating on wool using pulsed plasma polymerization of HMDSO. This coating enabled a controllable MVTR and surface adhesion. MVTR in the range recommended for optimum wound healing was obtained by varying frequency, monomer pressure and deposition time. Lower surface adhesion was achieved. Peeling tests, contact angle measurements, SPM force curves and ATR FT-IR were used to characterize the surfaces for both wool and a PE model substrate. All these results were consistent with a decrease in surface energy after PP-HMDSO treatment. ATR FT-IR results showed a siloxane film with less organic Si(CH₃)_n groups and more SiOSi cross-links.

Children's liking and wanting of snack products : influence of shape and flavour

Background : Children's food choices are guided by their preferences. However, these preferences may change due to repeated exposure.

Methods : This study investigated children's (n = 242, 7–12 yrs-old) liking and wanting for snacks over 3 weeks of daily consumption. The snacks differed in size (small vs large) or flavour (sweet vs sweet-sour). Two conditions were designed: 1) a monotonous group in which children continuously consumed the same snack across the 3 weeks, and 2) a free choice group in which children were allowed to freely choose amongst 3 different flavours of the snack each day during 3 weeks.

Results : Shape influenced long-term liking, i.e. small shaped snacks remained stable in liking over repeated consumption, whereas large shaped snacks with the same flavour decreased in liking. Mean wanting ratings for all snack products decreased over 3 weeks daily consumption. Flavour did not significantly influence liking and wanting over time. The ability to freely choose amongst different flavours tended to decrease children's liking (p < 0.1) and wanting (p < 0.001) for these products. Changes in liking rather than initial liking was the best predictor of snack choice during the intervention.

Conclusion : Wanting rather than liking was most affected by repeated daily consumption of snack foods over three weeks. In order to increase the likelihood that children will repeatedly eat a food product, smaller sized healthy snacks are preferred to larger sized snacks. Future research should focus on stabilizing wanting over repeated consumption.