Investigating the distribution of acacia longifolia ssp. sophorae in south-west Victoria using satellite remote sensing and GIS

Mapping and analysis of the distribution of environmental weeds is an important component of strategic weed management. Such information is particularly important in managing 'native invaders', where invasion characteristics must be clearly understood prior to any management action being taken. This paper reports on an investigation of the current distribution of the native invader Acacia longifolia ssp. sophorae (Labill.) Court (coast wattle) in south-west Victoria, using remote sensing and Geographic Information Systems (GIS). Coast wattle was successfully mapped from Landsat ETM imagery using a supervised classification procedure, with 82%, of coast wattle shown on the map accurately depicting coast wattle on the ground. An estimated 11,448 ha were classified as supporting coast wattle, representing 12% of native vegetation in the study area. A more detailed GIS analysis in the Lower Glenelg National Park revealed coast wattle has invaded a limited number of vegetation types, and is more prevalent close to roads and within management zones associated with disturbance. The current regional extent of the species means widespread control is unlikely; hence the immediate focus should be on preventing further spread into areas where it is currently absent. Landsat imagery also proved to be a successful tool for mapping large scale coast wattle distribution, and could be used in long-term monitoring of the species.

Monitoring protected areas using remote sensing technology

Due to irrational use of natural resources, human society is facing unprecedented threats. Remote sensing is one of the essential tools to determine changes in various forms of biological diversity over time. There are many methods to determine changes in protected areas, using satellite images. In this paper after introducing different change detection methods and their advantages and disadvantages, a hybrid method is used to analyse changes in forests and protected areas in a national park. Two Landsat images of Golestan National Park in Iran (taken in 1998 and 2010) were used. This hybrid approach combines Change Vector Analysis (CVA) for flagging the occurrence of changes, followed by signature extension to assign labels to changedpixels. The main objective of this paper is to propose a method for discovering and assessing environmental threats to natural treasures.

Evaluating coverage changes in national parks using a hybrid change detection algorithm and remote sensing

Remote sensing is a useful tool for detecting change over time.We introduce a hybrid change-detection method for forest and protected-area vegetation and demonstrate its use with two satellite images of Golestan National Park in northern Iran (1998 and 2010). We report on the advantages and disadvantages of the hybrid method relative to the standard change-detection method. In the proposed hybrid algorithm, the change vector analysis technique was used to determine changes in vegetation. Following this, we used postclassification comparison to determine the nature of the changes observed and their accuracy and to evaluate the effects of different parameters on the performance of the proposed method. We determined 85% accuracy for the proposed hybrid change-detection method, thus demonstrating a method for discovering and assessing environmental threats to natural treasures. © 2014 Society of Photo-Optical Instrumentation Engineers.

Hydro-acoustic remote sensing of benthic biological communities on the shallow South East Australian continental shelf

Information regarding the composition and extent of benthic habitats on the South East Australian continental shelf is limited. In this habitat mapping study, multibeam echosounder (MBES) data are integrated with precisely geo-referenced video ground-truth data to quantify benthic biotic communities at Cape Nelson, Victoria, Australia. Using an automated decision tree classification approach, 5 representative biotic groups defined from video analysis were related to hydro-acoustically derived variables in the Cape Nelson survey area. Using a combination of multibeam bathymetry, backscatter and derivative products produced highest overall accuracy (87%) and kappa statistic (0.83). This study demonstrates that decision tree classifiers are capable of integrating variable data types for mapping distributions of benthic biological assemblages, which are important in maintaining biodiversity and other system services in the marine environment.

Retrospective application of remote sensing to the Tasmanian lakeland

This thesis describes the research undertaken for a degree of Master of Science in a retrospective study of airborne remotely sensed data registered in 1990 and 1993, and field captured data of aquatic humus concentrations for ~ 45 lakes in Tasmania. The aim was to investigate and describe the relationship between the remotely sensed data and the field data and to test the hypothesis that the remotely sensed data would establish further evidence of a limnological corridor of change running north-west to south- east. The airborne remotely sensed data consisted of data captured by the CSIRO Ocean Colour Scanner (OCS) and a newly developed Canadian scanner, a compact airborne spectrographic imager (CASI). The thesis investigates the relationship between the two kinds of data sources. The remotely sensed data was collected with the OCS scanner in 1990 (during one day) and with both the OCS and the CASI in 1993 (during three days). The OCS scanner registers data in 9 wavelength bands between 380 nm and 960 nm with a 10-20 nm bandwidth, and the CASI in 288 wavelength bands between 379.57 nm and 893.5 nm (ie. spectral mode) with a spectral resolution of 2.5 nm. The remotely sensed data were extracted from the original tapes with the help of the CSIRO and supplied software and digital sample areas (band value means) for each lake were subsequently extracted for data manipulation and statistical analysis. Field data was captured concurrently with the remotely sensed data in 1993 by lake hopping using a light aircraft with floats. The field data used for analysis with the remotely sensed data were the laboratory determined g440 values from the 1993 water samples collated with g440 values determined from earlier years. No spectro-radiometric data of the lakes, data of incoming irradiance or ancillary climatic data were captured during the remote sensing missions. The sections of the background chapter in the thesis provide a background to the research both in regards to remote sensing of water quality and the relationship between remotely sensed spectral data and water quality parameters, as well as a description of the Tasmanian lakes flown. The lakes were divided into four groups based on results from previous studies and optical parameters, especially aquatic humus concentrations as measured from field captured data. The four groups consist of the ‘green” clear water lakes mostly situated on the Central Plateau, the ‘brown” highly dystrophic lakes in western Tasmania, the ‘corridor” lakes situated along a corridor of change lying approximately between the two lines denoting the Jurassic edge and 1200 mm isohyet, and the ‘eastern, turbid” lakes make up the fourth group. The analytical part of the research work was mostly concerned with manipulating and analysing the CASI data because of its higher spectral resolution. The research explores methods to apply corrections to this data to reduce the disturbing effects of varying illumination and atmospheric conditions. Three different methods were attempted. In the first method two different standardisation formulas are applied to the data as well as ‘day correction” factors calculated from data from one of the lakes, Lake Rolleston, which had data captured for all three days of the remote sensing operations. The standardisation formulas were also applied to the OCS data. In second method an attempt to reduce the effects of the atmosphere was performed using spectro-radiometric captured in 1988 for one of the lakes flown, Great Lake. All the lake sample data were time normalised using general irradiance data obtained from the University of Tasmania and the sky portion as calculated from Great Lake upwelling irradiance data was then subtracted. The last method involved using two different band ratios to eliminate atmospheric effects. Statistical analysis was applied to the data resulting from the three methods to try to describe the relationship between the remotely sensed data and the field captured data. Discriminant analysis, cluster analysis and factor analysis using principal component analysis (pea) were applied to the remotely sensed data and the field data. The factor scores resulting from the pca were regressed against the field collated data of g440 as were the values resulting from last method. The results from the statistical analysis of the data from the first method show that the lakes group well (100%) against the predetermined groups using discriminant analysis applied to the remotely sensed CASI data. Most variance in the data are contained in the first factor resulting from pca regardless of data manipulation method. Regression of the factor scores against g440 field data show a strong non- linear relationship and a one-sided linear regression test is therefore considered an inappropriate analysis method to describe the dataset relationships. The research has shown that with the available data, correction and analysis methods, and within the scope of the Masters study, it was not possible to establish the relationships between the remotely sensed data and the field measured parameters as hoped. The main reason for this was the failure to retrieve remotely sensed lake signatures adequately corrected for atmospheric noise for comparison with the field data. This in turn is a result of the lack of detailed ancillary information needed to apply available established methods for noise reduction - to apply these methods we require field spectroradiometric measurements and environmental information of the varying conditions both within the study area and within the time frame of capture of the remotely sensed data.

Detecting patterns of change in benthic habitats by acoustic remote sensing

Changes in benthic habitats occur as a result of natural variation or human-induced processes. It is important to understand natural fine-scale inter-annual patterns of change to separate these signals from patterns of long-term change. Describing change from an acoustic remote sensing standpoint has been facilitated by the recent availability of full coverage swath acoustic datasets, but is limited by cost pressures associated with multiple surveys of the same area. We studied the use of landscape transition analysis as a means to differentiate seemingly random patterns of habitat change from systematic signals of habitat transition at a shallow (10 to 50 m depth) 18 km2 site on the temperate Australian continental shelf in 2006 and 2007. Supervised classifications for each year were accomplished using inde pendently collected highresolution swath acoustic and video reference data. Of the 4 representative biotic clas ses considered, signals of directional systematic changes occurred be tween a kelp-dominated class, a sessile invertebrate-dominated class and a mixed class of kelp and sessile invertebrates. We provide a detailed analysis of the components of the traditional change detection cross tabulation matrix, allowing identification of the strongest signals of systematic habitat transitions. Iden tifying patterns of habitat change is an important first step toward understanding the processes that drive them.

Use of geographical information system and remote sensing techniques for planning culture-based fisheries in non-perennial reservoirs of Sri Lanka

 The presence of a wide areal extent of small-sized village reservoirs offers a considerable potential for the development of culture-based fisheries (CBFs) in Sri Lanka. To this end, this study uses geographical information systems (GISs) and remote sensing (RS) techniques to determine the morphometric and biological characteristics most useful for classifying non-perennial reservoirs for CBF development and for assessing the influence of catchment land-use patterns on potential CBF yields. The reservoir shorelines at full water supply level were mapped with a Global Positioning System to determine shoreline length and reservoir areal extent. The ratio of shoreline length to reservoir extent, which was reported to be a powerful predictor variable of CBF yields, could be reliably quantified using RS techniques. The areal extent of reservoirs, quantified with RS techniques (RS extent), was used to estimate the ratio of forest cover plus scrubland cover to RS extent and was found to be significantly related to the CBF yield (R2 = 0.400; P < 0.05). The results of this study indicated that morphometric characteristics and catchment land-use patterns, which might be viewed as indices of biological productivity, can be quantified using RS and GIS techniques. © 2014 Wiley Publishing Asia Pty Ltd.

GIS and remote sensing-based spatial models for commercial fisheries assessment

By applying a novel set of multidisciplinary GIS, remote sensing and spatial modelling approaches, research presented in this thesis advances our knowledge of the distribution patterns, fishery and ecological status of an important commercial benthic macro-invertebrate, blacklip abalone, in south-east Australia.

Evidence for Megalake Chad, north-central Africa, during the late quaternary from satellite data

The existence of a very large Lake Chad during the late Quaternary, Megalake Chad, has long been questioned. A Megalake Chad would present strong evidence for climatic fluctuations of great magnitude during the Holocene in tropical Africa. In this paper we used satellite data from Landsat and Modis sensors to collect and analyse new information on landforms in a 2 000 000 km2 region of the Lake Chad Basin. We detected 2300 km of remains marking the ancient shoreline of Megalake Chad. The satellite data also indicated many Saharan rivers and relict deltas leading to the long paleoshoreline. Large dunefield flattenings were observed and interpreted as the result of wave-cut erosion by the paleolake. Similarities were noticed between the landforms observed along the paleoshoreline of Megalake Chad and that of the former Aral Sea. This finding has significant consequences for reconstructing paleohydrology and paleoenvironments through the Lake Chad basin, and continental climate change.

Corner Inlet and Nooramunga Habitat Mapping Project – Part 2 : High resolution mapping and change detection analysis using 2011 Rapid Eye Satellite Image compared to 2009 ALOS Satellite Image

Building on a habitat mapping project completed in 2011, Deakin University was commissioned by Parks Victoria (PV) to apply the same methodology and ground-truth data to a second, more recent and higher resolution satellite image to create habitat maps for areas within the Corner Inlet and Nooramunga Marine and Coastal Park and Ramsar area. A ground-truth data set using in situ video and still photographs was used to develop and assess predictive models of benthic marine habitat distributions incorporating data from both RapidEye satellite imagery (corrected for atmospheric and water column effects by CSIRO) and LiDAR (Light Detection and Ranging) bathymetry. This report describes the results of the mapping effort as well as the methodology used to produce these habitat maps.

Overall accuracies of habitat classifications were good, with error rates similar to or better than the earlier classification (>73 % and kappa values > 0.58 for both study localities). The RapidEye classification failed to accurately detect Pyura and reef habitat classes at the Corner Inlet locality, possibly due to differences in spectral frequencies. For comparison, these categories were combined into a ‘non-seagrass’ category, similar to the one used at the Nooramunga locality in the original classification. Habitats predicted with highest accuracies differed from the earlier classification and were Posidonia in Corner Inlet (89%), and bare sediment (no-visible seagrass class) in Nooramunga (90%). In the Corner Inlet locality reef and Pyura habitat categories were not distinguishable in the repeated classification and so were combined with bare sediments. The majority of remaining classification errors were due to the misclassification of Zosteraceae as bare sediment and vice versa. Dominant habitats were the same as those from the 2011 classification with some differences in extent. For the Corner Inlet study locality the no-visible seagrass category remained the most extensive (9059 ha), followed by Posidonia (5,513 ha) and Zosteraceae (5,504 ha). In Nooramunga no-visible seagrass (6,294 ha), Zosteraceae (3,122 ha) and wet saltmarsh (1,562 ha) habitat classes were most dominant.

Change detection analyses between the 2009 and 2011 imagery were undertaken as part of this project, following the analyses presented in Monk et al. (2011) and incorporating error estimates from both classifications. These analyses indicated some shifts in classification between Posidonia and Zosteraceae as well as a general reduction in the area of Zosteraceae. Issues with classification of mixed beds were apparent, particularly in the main Posidonia bed at Nooramunga where a mosaic of Zosteraceae and Posidonia was seen that was not evident in the ALOS classification. Results of a reanalysis of the 1998-2009 change detection illustrating effects of binning of mixed beds is also provided as an appendix.

This work has been successful in providing baseline maps at an improved level of detail using a repeatable method meaning that any future changes in intertidal and shallow water marine habitats may be assessed in a consistent way with quantitative error assessments. In wider use, these maps should also allow improved conservation planning, advance fisheries and catchment management, and progress infrastructure planning to limit impacts on the Inlet environment.

Satellite imagery as a single source of predictor variables for habitat suitability modelling: how Landsat can inform the conservation of a critically endangered lemur

1. Statistical modelling of habitat suitability is an important tool for planning conservation interventions, particularly for areas where species distribution data are expensive or hard to collect. Sometimes however the predictor variables typically used in habitat suitability modelling are themselves difficult to obtain or not meaningful at the geographical extent of the study, as is the case for the Alaotran gentle lemur Hapalemur alaotrensis, a critically endangered lemur confined to the marshes of Lake Alaotra in Madagascar.2. We developed a habitat suitability model where all predictor variables, including vegetation indices and image texture measures at different scales (as surrogates for habitat structure), were derived from Landsat7 satellite imagery. Using relatively few presence records, the maximum entropy (Maxent) approach and AUC were used to assess the performance of candidate predictor variables, for studying the effect of scale, model selection and mapping suitable habitat.3. This study demonstrated the utility of satellite imagery as a single source of predictor variables for a Maxent habitat suitability model at the landscape level, within a restricted geographical extent and with a fine grain, in a case where predictor variables typically used at the macro-scale level (e.g. climatic and topographic) were not applicable.4. In the case of H. alaotrensis, the methodology generated a habitat suitability map to inform conservation management in Lake Alaotra and a replicable protocol to allow rapid updates to habitat suitability maps in the future. The exploration of candidate predictor variables allowed the identification of scales that appear ecologically relevant for the species.5. Synthesis and applications. This study presents a cost-effective combination of maximum entropy habitat suitability modelling and satellite imagery, where all predictor variables are derived solely from Landsat7 images. With a habitat modelling method like Maxent that shows good performance with few presence samples and Landsat images now freely available, the methodology can play an important role in rapid assessments of the status of species at the landscape level in data-poor regions, when typical macro-scale environmental predictors are of little use or difficult to obtain.

Multivariate modelling of landuse on in-stream salinity over multiple spatial scales

An impediment to sustainable dryland salinity management is the lack of information on contributing factors. GIS and satellite imagery now offer a cost-effective means of generating relevant land and water resource information for integrated regional management of salinity. In this paper the relationships between patterns in land uselcover distribution and base flow salt concentration in streams (indicated by EC) are investigated and modelled. The Glenelg-Hopkins area is a large regional watershed in southwest Victoria, Australia, covering approximately 2.6 million ha. It is currently estimated that 27,400 ha of land is affected by dryland salinity and this is predicted to rapidly increase in the next decade' if current conditions prevail. Salt concentration data from five gauging stations were analysed with multi-temporal land use maps obtained from satellite imagery. Multiple regression analyses demonstrated that the variables Native Vegetation and Dry/and Grain Cropping were the most significant influences on in~stream salinity in the whole catchment (1=88.9%) and 500 m V=88.3%) and 100 m riparian buffers (1=86.9%) during times of base flow. The implications for future land use planning, effectiveness of riparian zones and revegetation programmes is discussed. This work also demonstrates the utility of applying nmltivariate statistical analyses, spatial statistics, and remote sensing with data integrated in a GIS framework for the purpose of predicting and managing the regional salinity threat.

Wireless sensor networks for in-situ image validation for water and nutrient management

Water and Nitrogen (N) are critical inputs for crop production. Remote sensing data collected from multiple scales, including ground-based, aerial, and satellite, can be used for the formulation of an efficient and cost effective algorithm for the detection of N and water stress. Formulation and validation of such techniques require continuous acquisition of ground based spectral data over the canopy enabling field measurements to coincide exactly with aerial and satellite observations. In this context, a wireless sensor in situ network was developed and this paper describes the results of the first phase of the experiment along with the details of sensor development and instrumentation set up. The sensor network was established based on different spatial sampling strategies and each sensor collected spectral data in seven narrow wavebands (470, 550, 670, 700, 720, 750, 790 nm) critical for monitoring crop growth. Spectral measurements recorded at required intervals (up to 30 seconds) were relayed through a multi-hop wireless network to a base computer at the field site. These data were then accessed by the remote sensing centre computing system through broad band internet. Comparison of the data from the WSN and an industry standard ground based hyperspectral radiometer indicated that there were no significant differences in the spectral measurements for all the wavebands except for 790nm. Combining sensor and wireless technologies provides a robust means of aerial and satellite data calibration and an enhanced understanding of issues of variations in the scale for the effective water and nutrient management in wheat.

Corner inlet and Nooramunga habitat mapping project

Deakin University and the University of Tasmania were commissioned by Parks Victoria (PV) to create two updated habitat maps for areas within the Corner Inlet and Nooramunga Marine and Coastal Park and Ramsar area. The team obtained a ground-truth data set using in situ video and still photographs. This dataset was used to develop and assess predictive models of benthic marine habitat distributions incorporating data from both ALOS (Advanced Land Observation Satellite) imagery atmospherically corrected by CSIRO and LiDAR (Light Detection and Ranging) bathymetry. This report describes the results of the mapping effort as well as the methodology used to produce these habitat maps.

Overall accuracies of habitat classifications were good, returning overall accuracies >73 % and kappa values > 0.62 for both study localities. Habitats predicted with highest accuracies included Zosteraceae in Nooramunga (91 %), reef in Corner Inlet (80 %), and bare sediment (no-visible macrobiota/no-visible seagrass classes; both > 76 %). The majority of classification errors were due to the misclassification of areas of sparse seagrass as bare sediment. For the Corner Inlet study locality the no-visible macrobiota (10,698 ha), Posidonia (4,608 ha) and Zosteraceae (4,229 ha) habitat classes covered the most area. In Nooramunga no-visible seagrass (5,538 ha), Zosteraceae (4,060 ha) and wet saltmarsh (1,562 ha) habitat classes were most dominant.

In addition to the commissioned work preliminary change detection analyses were undertaken as part of this project. These analyses indicated shifts in habitat extents in both study localities since the late 1990s/2000. In particular, a post-classification analysis highlighted that there were considerable increases in seagrass habitat (primarily Zosteraceae) throughout the littoral zones and river/creek mouths of both study localities. Further, the numerous channel systems remained stable and were free of seagrass at both times. A substantial net loss of Posidonia in the Corner Inlet locality is likely but requires further investigation due to potential misclassifications between habitats in both the 1998 map (Roob et al. 1998) and the current mapping. While the unsupervised Independent Components Analysis (ICA) change detection technique indicated some changes in habitat extent and distribution, considerable areas of habitat change observed in the post-classification approach are questionable, and may reflect misclassifications rather than real change. A particular example of this is an apparent large decrease in Zosteraceae and increase in Posidonia being related to the classification of Posidonia beds as Zosteraceae in the 1998 mapping. Despite this, we believe that changes indicated by both the ICA and post-classification approaches have a high likelihood of being ‘actual’ change. A pattern of gains and losses of Zosteraceae in the region north of Stockyard channel is an example of this. Further analyses and refinements of approaches in change detection analyses such as would improve confidence in the location and extent of habitat changes over this time period.

This work has been successful in providing new baseline maps using a repeatable method meaning that any future changes in intertidal and shallow water marine habitats may be assessed in a consistent way with quantitative error assessments. In wider use, these maps should also allow improved conservation planning, advance fisheries and catchment management, and progress infrastructure planning to limit impacts on the Inlet environment.

Role assessment of GIS analysis and its reliability while ranking urban sustainability using scenarios specific to regional climate, community and culture

Urban Sustainability expresses the level of conservation of a city while living a town or consuming its urban resources, but the measurement of urban sustainability depends on what are considered important indicators of conservation besides the permitted levels of consumption in accordance with adopted criteria. This criterion should have common factors that are shared for all the members tested or cities to be evaluated as in this particular case for Abu Dhabi, but also have specific factors that are related to the geographic place, community and culture, that is the measures of urban sustainability specific to a middle east climate, community and culture where GIS Vector and Raster analysis have a role or add a value in urban sustainability measurements or grading are considered herein. Scenarios were tested using various GIS data types to replicate urban history (ten years period), current status and expected future of Abu Dhabi City setting factors to climate, community needs and culture. The useful Vector or Raster GIS data sets that are related to every scenario where selected and analysed in the sense of how and how much it can benefit the urban sustainability ranking in quantity and quality tests, this besides assessing the suitable data nature, type and format, the important topology rules to be considered, the useful attributes to be added, the relationships which should be maintained between data types of a geo- database, and specify its usage in a specific scenario test, then setting weights to each and every data type representing some elements of a phenomenon related to urban suitability factor. The results of assessing the role of GIS analysis provided data collection specifications such as the measures of accuracy reliable to a certain type of GIS functional analysis used in an urban sustainability ranking scenario tests. This paper reflects the prior results of the research that is conducted to test the multidiscipline evaluation of urban sustainability using different indicator metrics, that implement vector GIS Analysis and Raster GIS analysis as basic tools to assist the evaluation and increase of its reliability besides assessing and decomposing it, after which a hypothetical implementation of the chosen evaluation model represented by various scenarios was implemented on the planned urban sustainability factors for a certain period of time to appraise the expected future grade of urban sustainability and come out with advises associated with scenarios for assuring gap filling and relative high urban future sustainability. The results this paper is reflecting are concentrating on the elements of vector and raster GIS analysis that assists the proper urban sustainability grading within the chosen model, the reliability of spatial data collected; analysis selected and resulted spatial information. Starting from selecting some important indicators to comprise the model which include regional culture, climate and community needs an example of what was used is Energy Demand & Consumption (Cooling systems). Thus, this factor is related to the climate and it‟s regional specific as the temperature varies around 30-45 degrees centigrade in city areas, GIS 3D Polygons of building data used to analyse the volume of buildings, attributes „building heights‟, estimate the number of floors from the equation, following energy demand was calculated and consumption for the unit volume, and compared it in scenario with possible sustainable energy supply or using different environmental friendly cooling systems this is followed by calculating the cooling system effects on an area unit selected to be 1 sq. km, combined with the level of greenery area, and open space, as represented by parks polygons, trees polygons, empty areas, pedestrian polygons and road surface area polygons. (initial measures showed that cooling system consumption can be reduced by around 15 -20 % with a well-planned building distributions, proper spaces and with using environmental friendly products and building material, temperature levels were also combined in the scenario extracted from satellite images as interpreted from thermal bands 3 times during the period of assessment. Other examples of the assessment of GIS analysis to urban sustainability took place included Waste Productivity, some effects of greenhouse gases measured by the intensity of road polygons and closeness to dwelling areas, industry areas as defined from land use land cover thematic maps produced from classified satellite images then vectors were created to take part in defining their role within the scenarios. City Noise and light intensity assessment was also investigated, as the region experiences rapid development and noise is magnified due to construction activities, closeness of the airports, and highways. The assessment investigated the measures taken by urban planners to reduce degradation or properly manage it. Finally as a conclusion tables were presented to reflect the scenario results in combination with GIS data types, analysis types, and the level of GIS data reliability to measure the sustainability level of a city related to cultural and regional demands.