Determination of human body composition

This thesis deals with two electrical methods designed to enable rapid, safe and noninvasive measurement of body composition, both for clinical and community use. The first section provides a review of the literature related to measurement of body composition in humans and outlines the approach of the research project. The second section deals with established methods of determining body composition, the two most important being hydrostatic densitometry and deuterium oxide dilution. In this part of the report, a novel method for measuring lung volume by hydrogen dilution at the time of underwater weighing is described. The main findings of the thesis are contained in the third section which deals with the assessment of body opposition by electrical means. There are two components to this part of the study. The first involved the testing of a commercially available bioelectric impedance analyser (BIA) which measures impedance to a flow of current through the body. Studies on the reproducibility and reliability of measurements were performed. Results showed the importance of correct electrode placement and revealed that subjects can consume a light meal and a drink before being measured with the BIA without adversely affecting impedance readings. Results suggested, however, that subjects empty their bladders before measurements are made. Strong correlations were found between height 2/ resistance and measurements of total body water (r = 0.839) and fat-free weight derived from densitometry (r = 0.821), Moderate correlations (r = 0.6 to 0.7) were also found when height /resistance was related to fat-free weight derived from anthropometric measurements. The second and major consonant of the third section deals with the development of a method based on the absorption of energy from a weak electromagnetic field established in a capacitor or chamber large enough to accommodate an adult human subject. The method involves measurement of the effect of the body on the electromagnetic field, and is based on differential absorption of energy by body fat and fat-free tissues. Regression equations were developed for predicting the weight of fat and fat-free tissue in the body from measurement of electromagnetic field effects in a test capacitor and in a resonating chamber. The test capacitor comprised a large aluminum cylinder with a copper rod as a central conductor. The following equation was derived for the relationship of fat-free weight (FEW) based on body density, with measurements of change in resonant frequency (ΔfR), height (H) and weight (W) : FFW = -4.39 + 0.690 W + 19.9 H + 37.6 ΔfR In a study of 17 subjects, a value of 0.891 was found for R2, and S.E.E. was 1.63. The resonating chamber consisted of a large enclosed aluminium cylinder with a copper rod as a central conductor. The following equation was derived for the relationship of fat weight (FW) based on the mean of estimates from body density and total body water, with measurements of change in signal attenuation (ΔA), change in resonant frequency (ΔfR), and height (H) and weight (W) : FW = 73.48 + 0.291 (W/√(ΔA) - 49.2 H - 0.53 ΔfR In a study of 27 subjects, a value of 0.956 was found for R2, and S.E.E. was 1.97. In these equations, variables were measured in the following units : FEW, FW and W (kg), ΔfR (MHz) and H (m).

Design and analysis of an antenna for batteryless transcranial direct current stimulation devices

The purpose of this study is to design a low-cost planar Archimedean dipole antenna for batteryless transcranial direct current stimulation devices. The antenna parameters including resonance frequency, radiation efficiency, radiation pattern, and gain are simulated using finite difference time domain based electromagnetic simulation software XFdtd. The proposed antenna is simulated with low-cost FR4 PCB substrate of thickness of 1.6 mm. The antenna is designed with half wavelength of resonant frequency and fed with a matching line. The target frequency band is the industrial, scientific and medical (ISM) band of 915 MHz which is in the simulated band width of 31 MHz (903-934MHz). Moreover, since the bio-effect of specific absorption rate by radio frequency electromagnetic wave for power harvesting is an important concern, we try to find out the safety limit. Thus a quantitative analysis of distributions of electric field and power absorption in anatomical human head model by the far field radio frequency energy received by our designed antenna has been presented.

Design and simulation of a high isolation RF MEMS shunt capacitive switch for C-K band

This paper presents a wide band RF MEMS capacitive switch. The LC resonant frequency is reduced from mm wave to X band frequencies at down-state by using a meander type membrane, with the frequency band is being increased by adding two short high impedance lines at both ends of coplanar waveguide (CPW). Moreover, this acts as T-match circuit in up-state position and improves the matching. Simulation results demonstrate that the capacitance ratio reduces from 50 to 21.4, S21 and S11 are less than −10dB for the entire frequency band at down-state and up-state. Also, a comprehensive and complete electric model of the switch is proposed and simulation results agree well with the characteristics of the physical structure of the MEMS switch. Vpull-in and Vpull-out of this switch are 8.1V and 0.3V, respectively.

A statistical model for combustion resonance from a DI diesel engine with applications

Introduced in this paper is a Bayesian model for isolating the resonant frequency from combustion chamber resonance. The model shown in this paper focused on characterising the initial rise in the resonant frequency to investigate the rise of in-cylinder bulk temperature associated with combustion. By resolving the model parameters, it is possible to determine: the start of pre-mixed combustion, the start of diffusion combustion, the initial resonant frequency, the resonant frequency as a function of crank angle, the in-cylinder bulk temperature as a function of crank angle and the trapped mass as a function of crank angle. The Bayesian method allows for individual cycles to be examined without cycle-averaging|allowing inter-cycle variability studies. Results are shown for a turbo-charged, common-rail compression ignition engine run at 2000 rpm and full load.