Freshwater reserves in Australia : directions and challenges for the development of a comprehensive, adequate and representative system of protected areas

The establishment of a system of protected areas that samples all ecosystems, including freshwater environments, in a comprehensive, adequate and representative (CAR) manner is regarded as a cornerstone for the conservation of biodiversity. There have been few quantitative assessments of the comprehensiveness, adequacy and representativeness of freshwater reserves in Australia. This paper reviews and quantifies the effect of classification of freshwater ecosystems for conservation planning, the importance of reservation status and protection measures for developing a CAR reserve system, and aspects of reserve design for freshwater ecosystems. We propose a strategic and iterative process that incorporates these measures to assist in the efficient and effective development of freshwater reserve systems worldwide. However, the provision of suitable water regimes for freshwater reserves presents further ecological and political challenges, and even adequate reservation of freshwater ecosystems may not conserve constituent biodiversity without effective management.

Prevalence and correlates of three types of pelvic pain in a nationally representative sample of Australian women

Objective:
To identify the prevalence and correlates of three types of pelvic pain (dysmenorrhoea, dyspareunia, and other chronic pelvic pain [CPP]) in a nationally representative sample of Australian women.

Design and setting:
The CPP survey was part of a broader national study of health and relationships. Computer-assisted telephone interviews were administered to a random sample of 8656 Australian households; 4366 women aged between 16 and 64 years were interviewed in 2004 and 2005. Eighteen of the more than 200 potential survey questions related to pelvic pain.

Main outcome measures:
Self-reports of dysmenorrhoea, dyspareunia, and any other CPP not associated with sexual intercourse or menstruation.

Results:
Data on 1983 women aged 16–49 years who were still menstruating and sexually active were analysed. Prevalences were 71.7% for dysmenorrhoea, 14.1% for dyspareunia and 21.5% for other CPP; 23.3% of women reported no pelvic pain of any kind. Severe pain was reported by 15.0% (95% CI, 13.0%–17.1%) of women with dysmenorrhoea, 7.8% (95% CI, 5.0%–11.9%) of women with dyspareunia and 20.0% (95% CI, 16.1%–24.6%) of women with other CPP. Just over a third (34.2%) of women who reported any pain had sought advice from a health professional. Women reporting CPP were also likely to report other health conditions, most notably depression and anxiety. There were clear associations between CPP and sexual difficulties, pregnancy and pregnancy outcomes.

Conclusions:
Rates of pelvic pain in Australian women are high. General practitioners need to be ready to discuss these issues with patients, particularly in relation to underlying anxiety and depression.

Common structural basis for central nervous system drug design

The main theme of this thesis is that there is a common structural basis for drugs acting on the central nervous system (CNS), and that this concept may be used to design new CNS-active drugs which have greater specificity and hence less side-effects. To develop these ideas, the biological basis of how drugs modify CMS neurotransmission is described, and illustrated using dopaminergic pathways. An account is then given of the use of physicochemical concepts in contemporary drug design. The complete conformational analysis of several antipsychotic drugs is used to illustrate some of these techniques in the development of a model for antipsychotic drug action. After reviewing current structure-activity studies in several classes of CNS drugs (antipsychotics, anti-depressants, stimulants, hal1ucinogens, anticonvulsants and analgesics), a hypothesis for a common structural basis of CNS drug action is proposed- This is based on a topographical comparison of the X-ray structures of eight representative CNS-active drugs, and consists of three parts: 1.there is a common structural basis for the activity of many different CNS-active drug classes; 2. an aromatic ring and a nitrogen atom are the primary binding groups whose topographical arrangement is fundamental to the activity of these drug classes; 3. the nature and placement of secondary binding determines different classes of CNS drug activity. A four-Point model for this common structural basis is then defined using 14- CNS-active drug structures that include the original eight used in proposing the hypothesis. The coordinates of this model are: R1 (0. 3.5, 0), R2 (0, -3.5, O), N (4.8. -0.3, 1.4), and R3 (6.3, 1.3, 0), where R1 and R2 represent the point locations of a hydrophobic interaction of the common aromatic ring with a receptor, and R3 locates the receptor point for a hydrogen bond involving the common nitrogen, N. Extended structures were used to define the receptor points R1, R2 and R3, and the complete conformational space of each of the 14 molecules was considered. It is then shoun that the model may be used to predict whether a given structure is likely to show CNS activity: a search over 1,000 entries in the current Merck Index shows a high probability (82%) of CNS activity in compounds fitting the structural model. Analysis of CNS neurotransmitters and neuropeptides shows that these fit the common model well. Based on the available evidence supporting chemical evolution, protein evolution, and the evolution of neurotransmitter functions, it is surmised that the aromatic ring/nitrogen atom pharmacophore proposed in the common model supports the idea of the evolution of CNS receptors and their neurotransmitters, possibly from an aromatic amine or acety1cho1ine acting as a primaeval communicating molecule. The third point in the hypothesis trilogy is then addressed. The extensive conformation-activity analyses that have resulted in well-defined models for five separate CNS drug classes are used to map out the locations of secondary binding groups relative to the common model for anti-psychotics, antidepressants, analgesics, anticholinergics, and anticonvulsants. With this information, and knowledge derived from receptor-binding data, it is postulated that drugs having specified activity could be designed. In order to generate novel structures having a high probability of CNS-activity, a process of drug design is described in which known CNS structures are superimposed topographically using the common model as a template. Atoms regarded as superfluous may be selectively deleted and the required secondary binding groups added in predicted locations to give novel structures. It is concluded that this process provides the basis for the rational design of new lead compounds which could further be optimized for potent and specific CNS activity.

Non-Deterministic Exploration through Parametric Design

This paper explores non-deterministic parametric modelling as a design tool. Specifically, it addresses the application of parametric variables to the generation of a conceptual bridge design and the use of repeatable discrete components to the conceptual form. In order to control the generation of the bridge form, a set of design variables based on the concept of a law curve have been developed.These design variables are applied and tested through interactive modelling and variation, driven by manipulating the law curve. Combining this process with the application and control of a repeatable element, known as a Representative Volumetric Element (RVE), allows for the development and exploration of a design solution that could not be achieved through the use of conventional computer modelling.The competition brief for the Australian Institute of Architects (AIA) ‘Dialectical Bridge’ has been used as a case study to demonstrate the use of non-deterministic parametric modelling as a design tool.The results of the experimentation with parametric variables, the law curve and representative volumetric elements (RVE) are presented in the paper.

Geometric and material constraints in parametric modelling : the design to fabrication process

Parametric modelling, commonly used in the automotive and aerospace industries, has recently been adopted in the architecture and construction fields. The ability to design small repeatable components and apply them to a larger governing surface geometry is one area of parametric modelling that has great design potential. This two level modelling control, of component and overall surface, can allow designers to explore new types of form generation subject to parametric constraints. This paper reports on the design to fabrication process using repeatable components over a governing or carrier surface. The paper reports on our study of the requirements and possible solutions for successfully controlling a repeatable element, known as a Representative Volumetric Element (RVE), using geometric parameters of a larger governing surface geometry and material properties. This modelling process, coupled with Rapid
Manufacturing (RM) and Computer Numerically Controlled (CNC) machines has the potential to significantly reduce the interface between design and fabrication.

Design earthquake ground motion prediction for Perth metropolitan area with microtremor measurements for site characterization

Perth is the largest city in Western Australia and home to three-quarters of the state's residents. In recent decades, there have been a lot of earthquake activities just east of Perth in an area known as the South-West Seismic Zone. Previous numerical results of site response analyses based on limited available geology information for PMA indicated that Perth Basin might amplify the bedrock motion by more than 10 times at some frequencies and at some sites. Hence, more detailed studies on site characterization and amplification are necessary. The microtremor method using spatial autocorrelation (SPAC) processing is a useful tool for gaining thickness and shear wave velocity (SWV) of sediments and has been adopted in many previous studies. In this study, the response spectrum of rock site corresponding to the 475-year return period for PMA is defined according to the probabilistic seismic hazard analysis (PSHA) based on the latest ground motion attenuation model of Southwest Western Australia. Site characterization in PMA is performed using two microtremor measurements, namely SPAC technique and H/V method. The clonal selection algorithm (CSA) is introduced to perform direct inversion of SPAC curves to determine the soil profiles of representative PMA sites investigated in this study. Using the simulated bedrock motion as input, the responses of the soil sites are estimated using numerical method based on the shear-wave velocity vs. depth profiles determined from the SPAC technique. The response spectrum of the earthquake ground motion on surface of each site is derived from the numerical results of the site response analysis, and compared with the respective design spectrum defined in the Australian Earthquake Loading Code. The comparison shows that the code spectra are conservative in the short period range, but may slightly underestimate the response spectrum at some long period range.

The level of representative underwriting and the underwriting costs of REIT SEOs

Purpose – The purpose of this paper is to investigate factors influencing the underwriting discount for US Real Estate Investment Trust (REIT) Seasoned Equity Offerings (SEOs).

Design/methodology/approach – The study provides new evidence on determinants of underwriting discounts with a comprehensive dataset of 783 US REIT SEOs from 1996 until June 2010. Ordinary least squares regressions are performed to estimate the effect of the level of representative underwriting along with other potential factors on underwriting discounts.

Findings – The study complements the well-documented notion of the economies of scale in SEO underwriting discounts. The equally (value) weighted underwriting discounts averaged 4.21 per cent (4.10 per cent) with a declining trend over time. The findings of this study show the statistically and economically significant negative effect of the level of representative underwriting on the underwriting discounts, as well as the significance of the structure of underwriting syndicate in determining the underwriting discounts. The findings suggest that issuers can minimize the costs of raising secondary equity capital by optimally allocating the underwriting business among the underwriters.

Originality/value – This paper adds to the international REIT SEO literature by exploring new evidence behind underwriting discounts. The study includes data before and after the REIT Modernization Act 1999 and during the recent global financial crisis period.

Enhancing and assessing group and team learning in architecture and related design contexts

EXECUTIVE SUMMARYTeamwork skills are essential in the design industry where practitioners negotiate often-conflicting design options in multi-disciplinary teams. Indeed, many of the bodies that accredit design courses explicitly list teamwork skills as essential attributes of design graduates e.g., the Australian Institute of Architects (AIA), Royal Institute of British Architects (RIBA), the National Council of Architectural Registration Boards (NCARB) of the United States and the Institution of Engineers, Australia (IEAust). In addition to the need to meet the demands of the accrediting bodies, there are many reasons for the ubiquitous use of teamwork assignments in design schools. For instance, teamwork learning is seen as being representative of work in practice where design is nearly always a collaborative activity. Learning and teaching in teamwork contexts in design education are not without particular challenges. In particular, two broad issues have been identified: first, many students leave academia without having been taught the knowledge and skills of how to design in teams; second, teaching, assessment and assignment design need to be better informed by a clear understanding of what leads to effective teamwork and the learning of teamwork skills. In recognition of the lack of a structured approach to integrating teamwork learning into the curricula of design programs, this project set out to answer three primary research questions: • How do we teach teamwork skills in the context of design? • How do we assess teamwork skills?• How do design students best learn teamwork skills?In addition, four more specific questions were investigated:1. Is there a common range of learning objectives for group-and-team-work in architecture and related design disciplines that will enable the teaching of consistent and measurable outcomes?2. Do group and team formation methods, learning styles and team-role preferences impact students’ academic and course satisfaction outcomes?3. What combinations of group-and-team formation methods, teaching and assessment models significantly improve learning outcomes?4. For design students across different disciplines with different learning styles and cultural origins, are there significant differences in performance, student satisfaction (as measured through questionnaires and unit evaluations), group-and-team working abilities and student participation?To elucidate these questions, a design-based research methodology was followed comprising an iterative series of enquiries: (a) A literature review was completed to investigate: what constitutes effective teamwork, what contributes to effectiveness in teams, what leads to positive design outcomes for teams, and what leads to effective learning in teams. The review encompassed a range of contexts: from work-teams in corporate settings, to professional design teams, to education outside of and within the design disciplines. The review informed a theoretical framework for understanding what factors impact the effectiveness of student design teams. (b) The validity of this multi-factorial Framework of Effectiveness in Student Design Teams was tested via surveys of educators’ teaching practices and attitudes, and of students’ learning experiences. 638 students and 68 teachers completed surveys: two pilot surveys for participants at the four partner institutions, which then informed two national surveys completed by participants from the majority of design schools across Australia. (c) The data collected provided evidence for 22 teamwork factors impacting team effectiveness in student design teams. Pedagogic responses and strategies to these 22 teamwork factors were devised, tested and refined via case studies, focus groups and workshops. (d) In addition, 35 educators from a wide range of design schools and disciplines across Australia attended two National Teaching Symposiums. The first symposium investigated the wider conceptualisation of teamwork within the design disciplines, and the second focused on curriculum level approaches to structuring the teaching of teamwork skills identified in the Framework.The Framework of Effectiveness in Student Design Teams identifies 22 factors impacting effective teamwork, along with teaching responses and strategies that design educators might use to better support student learning. The teamwork factors and teaching strategies are categorised according to three groups of input (Task Characteristics, Individual Level Factors and Team Level Factors), two groups of processes (Teaching Practice & Support Structures and Team Processes), and three categories of output (Task Performance, Teamwork Skills, and Attitudinal Outcomes). Eight of the 22 teamwork factors directly relate to the skills that need to be developed in students, one factor relates to design outputs, and the other thirteen factors inform pedagogies that can be designed for better learning outcomes. In Table 10 of Section 4, we outline which of the 22 teamwork factors pertain to each of five stakeholder groups (curriculum leaders, teachers, students, employers and the professional bodies); thus establishing who will make best use the information and recommendations we make. In the body of this report we summarise the 22 teamwork factors and teaching strategies informed by the Framework of Effectiveness in Student Design Teams, and give succinct recommendations arising from them. This material is covered in depth by the project outputs. For instance, the teaching and assessment strategies will be expanded upon in a projected book on Teaching Teamwork in Design. The strategies are also elucidated by examples of good practice presented in our case studies, and by Manuals on Teamwork for Teachers and Students. Moreover, the project website ( visited by representatives of stakeholder groups in Australia and Canada), is seeding a burgeoning community of practice that promises dissemination, critical evaluation and the subsequent refinement of our materials, tools, strategies and recommendations. The following three primary outputs have been produced by the project in answer to the primary research questions:1. A theoretical Framework of Effectiveness in Student Design Teams;2. Manuals on Teamwork for Teachers and Students (available from the website);3. Case studies of good/innovative practices in teaching and assessing teamwork in design;In addition, five secondary outputs/outcomes have been produced that provide more nuanced responses:4. Detailed recommendations for the professional accrediting bodies and curriculum leaders;5. Online survey data (from over 700 participants), plus Team Effectiveness Scale to determine the factors influencing effective learning and successful outputs for student design teams;6. A community of practice in policy, programs, practice and dialogue;7. A detailed book proposal (with sample chapter), submitted to prospective publishers, on Teaching Teamwork in Design; 8. An annotated bibliography (accessed via the project website) on learning, teaching and assessing teamwork.The project has already had an international impact. As well as papers presented in Canada and New Zealand, the surveys were participated in by six Canadian schools of architecture, whose teaching leaders also provided early feedback on the project aims and objectives during visits made to them by the project leader. In addition, design schools in Vancouver, Canada, and San Diego in the USA have already utilised the Teacher’s Manual, and in February 2014 the project findings were discussed at Tel Aviv University in a forum focusing on the challenges for sustainability in architectural education.