Electrochemical and quantum chemical assessment of two organic compounds from pyridine derivatives as corrosion inhibitors for mild steel in HCl solution under stagnant condition and hydrodynamic flow

 In this study, the inhibitive performance of two pyridine derivatives as corrosion inhibitors for mild steel was examined under stagnant condition and hydrodynamic flow in HCl solution at 25. °C. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were employed. To explore the inhibitors adsorption mechanism, Langmuir isotherm and quantum chemical studies were used. The results of electrochemical measurements show that the inhibitor concentration has a positive effect on its efficiency while for hydrodynamic condition, it is vice versa. Corrosion attack morphologies were observed at stagnant and hydrodynamic conditions to verify qualitatively the results obtained by electrochemical methods. © 2013 Elsevier Ltd.

Aluminium speciation in 1-Butyl-1-Methylpyrrolidinium Bis(trifluoromethylsulfonyl)amide/AlCl3 mixtures

Aluminium speciation: Aluminium speciation in NTf₂ ionic liquids has a strong influence on its electrodeposition from the liquid mixture. This work probed the nature of these species and proposes that the electroactive species involved are either [AlCl₃(NTf₂)]⁻ or [AlCl₂(NTf₂)₂]⁻ (e.g., see figure).


Electrodeposition of aluminium is possible from solutions of AlCl₃ dissolved in the 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (C₄mpyrNTf₂) ionic liquid. However, electrodeposition is dependant on the AlCl₃ concentration as it only occurs at concentrations >1.6 mol L⁻¹. At these relatively high AlCl₃ concentrations the C₄mpyrNTf₂/AlCl₃ mixtures exhibit biphasic behaviour. Notably, at 1.6 mol L⁻¹ AlCl₃, aluminium can only be electrodeposited from the upper phase. Conversely, we found that at 3.3 mol L⁻¹ aluminium electrodeposition can only occur from the lower phase. The complex chemistry of the C₄mpyrNTf₂/AlCl₃ system is described and implications of aluminium speciation in several C₄mpyrNTf₂/AlCl₃ mixtures, as deduced from Raman and ²⁷Al NMR spectroscopic data, are discussed. The ²⁷Al NMR spectra of the C₄mpyrNTf₂/AlCl₃ mixtures revealed the presence of both tetrahedrally and octahedrally coordinated aluminium species. Raman spectroscopy revealed that the level of uncoordinated NTf₂⁻ anions decreased with increasing AlCl₃ concentration. Quantum chemical calculations using density functional and ab initio theory were employed to identify plausible aluminium-containing species and to calculate their vibrational frequencies, which in turn assisted the assignment of the observed Raman bands. The data indicate that the electroactive species involved are likely to be either [AlCl₃(NTf₂)]⁻ or [AlCl₂(NTf₂)₂]⁻.

Insight into local structure and molecular dynamics in organic solid-state ionic conductors

Elucidating the rate and geometry of molecular dynamics is particularly important for unravelling ion-conduction mechanisms in electrochemical materials. The local molecular motions in the plastic crystal 1-ethyl-1-methylpyrrolidinium tetrafluoroborate ([C2 mpyr][BF4 ]) are studied by a combination of quantum chemical calculations and advanced solid-state nuclear magnetic resonance spectroscopy. For the first time, a restricted puckering motion with a small fluctuation angle of 25° in the pyrrolidinium ring has been observed, even in the low-temperature phase (-45 °C). This local molecular motion is deemed to be particularly important for the material to maintain its plasticity, and hence, its ion mobility at low temperatures.

Cross-strand disulfides in the non-hydrogen bonding site of antiparallel β-sheet (aCSDns): poised for biological switching

Forbidden disulfides are stressed disulfides found in recognisable protein contexts previously defined as structurally forbidden. The torsional strain of forbidden disulfides is typically higher than for structural disulfides, but not so high as to render them immediately susceptible to reduction under physionormal conditions. The meta-stability of forbidden disulfides makes them likely candidates as redox switches. Here we mined the Protein Data Bank for examples of the most common forbidden disulfide, the aCSDn. This is a canonical motif in which disulfide-bonded cysteine residues are positioned directly opposite each other on adjacent anti-parallel β-strands such that the backbone hydrogen bonded moieties are directed away from each other. We grouped these aCSDns into homologous clusters and performed an extensive physicochemical and informatic analysis of the examples found. We estimated their torsional energies using quantum chemical calculations and studied differences between the preferred conformations of the computational model and disulfides found in solved protein structures to understand the interaction between the forces imposed by the disulfide linkage and typical constraints of the surrounding β-sheet. In particular, we assessed the twisting, shearing and buckling of aCSDn-containing β-sheets, as well as the structural and energetic relaxation when hydrogen bonds in the motif are broken. We show the strong preference of aCSDns for the right-handed staple conformation likely arises from its compatibility with the twist, shear and Cα separation of canonical β-sheet. The disulfide can be accommodated with minimal distortion of the sheet, with almost all the strain present as torsional strain within the disulfide itself. For each aCSDn cluster, we summarise the structural and strain data, taxonomic conservation and any evidence of redox activity. aCSDns are known substrates of thioredoxin-like enzymes. This, together with their meta-stability, means they are ideally suited to biological switching roles and are likely to play important roles in the molecular pathways of oxidative stress.

Experimental and theoretical investigation on corrosion inhibition of AA5052 aluminium alloy by l-cysteine in alkaline solution

The corrosion inhibition of l-cysteine on AA5052 aluminium alloy in 4 mol/L NaOH solution was investigated by hydrogen gas evolution experiment, polarisation curve, galvanostatic discharge, electrochemical impedance spectroscopy measurements and quantum chemical calculations. The adsorption of l-cysteine on aluminium alloy surface obeyed the amended Langmuir's adsorption isotherm. The polarisation curves indicated that l-cysteine acted as a cathodic inhibitor to inhibit cathodic reaction. The inhibition mechanism was dominated by the geometric covering effect. The galvanostatic discharge shows that the additives restrain the hydrogen evolution and increase the anodic utilization rate. Quantum chemical calculations indicated that l-cysteine molecules mainly interacted with on the carboxyl groups on the aluminium alloy surface. A strong hybridization occurred between the s-orbital and p-orbital of reactive sites in the l-cysteine molecule and the sp-orbital of Aluminium.

Insights into the reversible oxygen reduction reaction in a series of phosphonium-based ionic liquids

New findings supporting the stability of the superoxide ion, O2˙(-), in the presence of the phosphonium cation, [P6,6,6,14](+), are presented. Extended electrochemical investigations of a series of neat phosphonium-based ILs with different anions, including chloride, bis(trifluoromethylsulfonyl)imide and dicyanamide, demonstrate the chemical reversibility of the oxygen reduction process. Quantum chemistry calculations show a short intermolecular distance (r = 3.128 Å) between the superoxide ion and the phosphonium cation. NMR experiments have been performed to assess the degree of long term degradation of [P6,6,6,14](+), in the presence of superoxide and peroxide species, showing no chemically distinct degradation products of importance in reversible air cathodes.

Modelling ion-pair geometries and dynamics in a 1-ethyl-1-methylpyrrolidinium-based ion-conductive crystal

Full conformational and energy explorations are conducted on an organic ionic plastic crystal, 1-ethyl-1-methylpyrrolidium tetrafluoroborate [C2 mpyr][BF4 ]. The onsets of various stages of dynamic behaviour, which appear to account for low-temperature solid-solid phase transitions, are investigated by using quantum-chemical simulations. It is suggested that pseudorotation of the pyrrolidine ring occurs in the first instance; the partial rotation of the entire cation subsequently occurs and may be accompanied by reorientation of the ethyl chain as the temperature increases further. A cation-anion configuration, whereby BF4 (-) interacts with the C2 mpy cation from the side of the ring, is the most likely structure in the low-temperature phase IV region. These interpretations are supported by (13) C nuclear magnetic resonance chemical-shift analysis.

Molecular dynamics study of response of liquid N,N-dimethylformamide to externally applied electric field using a polarizable force field

The behavior of Liquid N,N-dimethylformamide subjected to a wide range of externally applied electric fields (from 0.001 V/nm to 1 V/nm) has been investigated through molecular dynamics simulation. To approach the objective the AMOEBA polarizable force field was extended to include the interaction of the external electric field with atomic partial charges and the contribution to the atomic polarization. The simulation results were evaluated with quantum mechanical calculations. The results from the present force field for the liquid at normal conditions were compared with the experimental and molecular dynamics results with non-polarizable and other polarizable force fields. The uniform external electric fields of higher than 0.01 V/nm have a significant effect on the structure of the liquid, which exhibits a variation in numerous properties, including molecular polarization, local cluster structure, rotation, alignment, energetics, and bulk thermodynamic and structural properties.

Exploring the use of the tripeptide Gly–Gly–His as a selective recognition element for the fabrication of electrochemical copper sensors

The modification of electrodes with the tripeptide Gly–Gly–His for the detection of copper in water samples is described in detail. The tripeptide modified electrode was prepared by first self-assembling 3-mercaptopropionic acid (MPA) onto the gold electrode followed by covalent attachment of the tripeptide to the self-assembled monolayer using carbodiimide coupling. The electrodes were characterized using electrochemistry, a newly developed mass-spectrometry method and quantum mechanical calculations. The mass spectrometry confirmed the modification to proceed as expected with peptide bonds formed between the carboxylic acids of the MPA and the terminal amine of the peptide. Electrochemical measurements indicated that approximately half the MPA molecules in a SAM are modified with the peptide. The peptide modified electrodes exhibited high sensitivity to copper which is attributed to the stable 4N coordinate complex the peptide formed around the metal ion to give copper the preferred tetragonal coordination. The formation of a 4 coordinate complex was predicted using quantum mechanical calculation and confirmed using mass spectrometry. The adsorption of the copper to the peptide modified electrode was consistent with a Langmuir isotherm with a binding constant of (8.1 ± 0.4) 1010 M−1 at 25 °C.

The mechanics of computation and human thought

Thousands of students are preparing for chemistry examinations in June. An unresolved debate is whether they should be permitted to use graphics and programmable calculators in those examinations. Some educators have not only advocated the use of graphics calculators, but have also pointed to the Danish system in which students are permitted to use computers in senior school examinations.

In some Australian jurisdictions, graphics calculators are permitted in year 12 mathematics examinations, but not in chemistry examinations. The reasoning is that information or methods of solving numerical chemical problems can be stored in the memory of graphics calculators, giving some students an unfair advantage. This means that chemistry students either have to learn how to use (and buy!) two types of calculators or, if they only have one calculator, are disadvantaged in using non-programmable calculators in mathematics examinations.

The use of technology (or its lack thereof) can limit how and what students learn. “The mechanics of computation and human thought” is an allusion to Asimov’s short story, “A Feeling of Power” in which, overuse of technology has caused people to forget how to do simple arithmetic. In our current assessment system, the insistence that students must be able to do simple chemical calculations has lead to underuse of available technology. The misperception is that the ability to do calculations is linked to understanding of concepts.

Graphics calculators, programmable calculators and computers are tools. Instead of banning or limiting technology, we should take the opportunity to rethink what is being assessed and how it is assessed. It is the proper use of technology, by combining the mechanics of computation and human thought to deepen understanding and to ask probing questions that truly leads to a feeling of power.

Synthesis and anti-corrosion performance of Adenine-L-Alanine ramification

In this paper, a new amino acid derivative, namely Adenine-L-Alanine ramification (ALAR) was synthesized and investigated as a green corrosion inhibitor for X80 pipeline steel in 0.1 mol/L hydrochloric acid solution using the weight loss, AC impedance, and polarization curve method. The structure of the derivative was characterized by IR and UV–vis spectrum. The weight loss and AC impedance found that the inhibition efficiency increased with the increase in concentration of the inhibitor but decreased with rise in temperature, the corrosion inhibition efficiency attains 91.26% in 8 × 10−2 g/L concentration at 30 °C. The polarization studies showed that the studied amino acid derivative can be used as a corrosion inhibitor. The surface of inhibited and uninhibited specimens was analyzed by scanning electron microscopy and the adsorption of the inhibitor on the mild steel surface obeys Langmuir adsorption isotherm. The quantum chemical descriptors such as the energy of highest occupied molecular orbital, energy of lowest unoccupied molecular orbital were calculated and the inhibition mechanism can be analyzed by the distribution of electrons. Analysis indicated that the inhibitor molecular and empty d orbital of metal forms the coordination bond, covers on the surface of metal, and prevents corrosion reaction.

Molecular dynamics approach to the structural characterization and transport properties of poly(acrylonitrile)/N,N-dimethylformamide solutions

Poly(acrylonitrile) (PAN) in N,N-dimethylformamide (DMF) is a popular solution for producing large variety of polymer products. To precisely describe the behaviours of PAN and DMF in the synthesis processes, it is significant to call for more details about the structure, some thermodynamic and dynamical properties of PAN-DMF solutions. A PAN-DMF solution was simulated via molecular dynamics with an all-atom OPLS type potential in both the NPT and NVT ensembles. The simulation results were evaluated with quantum mechanical calculations (MP2/6-311 ++G(d,p) and counterpoise procedure) and were compared with available experimental results. The liquid structure was illustrated with pair correlation functions and transport and dynamics properties were calculated with the mean-square displacements MSD and the velocity autocorrelation functions. The strong H-bonds of C≡N « H-C=O, CH » O=C-H and CH2 O=C-H, with distances of 2.55 Å, 2.55 Å and 2.65 Å, respectively, were found. The largest interaction energy of - 7.157 kcal/mol between DMF molecules and PAN molecules was found at 4.9 Å center-of-mass distance. A potential profile of intermolecular interaction of DMF with PAN along the interaction distance was presented, clearly showing an increase of DMF vaporisation heat when it getting close to PAN molecules. This provided very useful information to analyse the vaporisation behaviours of DMF at the microscopic level, which is essential to comprehensively understand molecular rearrangements towards the design of synthetic processes. The impact of the presence of the PAN on the DMF solution properties were also benchmarked with pure DMF solution.

Bond length dependence on quantum states as shown by spectroscopy

Undergraduate students often have the misconception that molecules have fixed, unchanging bond lengths. This article discusses how linear-molecule rotational band spacings in infrared spectroscopy can be used as a qualitative, visual demonstration of the elongation of average bond lengths on vibrational excitation. The method does not depend on a detailed mathematical analysis of the spectra. In UV–vis spectroscopy, the rotational band spacings give rise to distinctive linear-molecule rotational contours, which easily show whether the average bond length has increased or decreased. The method is based on a spreadsheet simulation of the vibration–rotation or rovibronic (electronic–vibration–rotation) spectrum and is applied to hydrogen chloride IR, iodine UV–vis, and nitrogen UV–vis spectra in this article.