Effect of operating parameters and cleaning on the performance of ceramic membranes treating partially clarified sugar cane juice

The performance of ceramic membranes with pore sizes of 0.05 and 0.10 mm in purifying limed and partially clarified sugar cane juice was investigated under different operating conditions. From various operating conditions and strategies, switching off the permeate for 5 seconds for every 5 minutes (S5sT5 m) by an automated control valve provided higher flux. From the three pH experiments conducted on the 0.05 mm membrane, the best performance was observed at a pH of 7.5. Amongst the four fouling models tested, the cake filtration model fitted the performance of both membranes with higher accuracy at a transmembrane pressure of 0.5 bar. Filtering the cane juice through the membrane reduced the turbidity by 99.7%, color by 15%, and the starch concentration by 80% as well as increased the purity by 1.4%. The effective cleaning chemical composition from experimental results showed that 1% NaOH and 3000 ppm NaOCl solution performed the best but only for the experiments that were treating limed and partially clarified juice at pH 7.5.

Clarification and concentration of sugar cane juice through ultra, nano and reverse osmosis membranes

The performance of ultrafiltration (UF) membranes with molecular weight cut off (MWCO) of 1000 and 3500 Da in clarifying sugar cane juice was investigated, as well as the performance of a nanofiltration (NF) membrane with MWCO of 200 Da and a reverse osmosis (RO) membrane in concentrating sugar cane juice. For both cases the sugar cane juice had been limed and partially clarified. The UF membranes were found to be effective at clarifying the sugar cane juice in terms of purity rise and reduction in turbidity, colour, starch and protein. A purity rise of approximately 6 was achieved by both UF membranes at trans-membrane pressures (TMP) from 15 to 25 bar. However, Brix reduction in the permeate was between 14.5 and 41.85% and 12.11 and 26.52% for 1000 Da and 3500 Da membranes respectively. For the 200 Da and RO membranes the Brix in the concentrate was increased from 7.65 to 12.3 after 3 hours of operation for the 200 Da membrane at a TMP of 10 bar, whilst the Brix in the concentrate was increased from 15.65 to 27.6 after 3 hours of operation for the RO membrane at a TMP of 35 bar. Overall, UF membranes were found to be unsuitable for clarification of sugar cane juice since significant amount of Brix is reduced in the permeate, whilst RO membranes were found to be effective for concentration of sugar cane juice.

The rise and rise of Crown appeals in Victoria

Increasing numbers of Crown appeals against sentences in Victoria - majority of appeals have been successful - what has occurred in relation to Crown appeals against sentence in the Victorian Court of Criminal Appeal between February 2002 and February 2004 - whether increase in Crown appeals is a continuing phenomenon - comparison with the jurisdictions of New South Wales and the UK - principles that govern Crown appeals may need to be reconsidered.

Energy efficient envelope design for high-rise apartments

The energy required to create a comfortable living environment in  high-density cities in hot and humid climates usually demands a substantial electricity usage with an associated environmental burden. This paper describes an integrated passive design approach to reduce the cooling requirement for high-rise apartments through an improved building envelope design. The results show that a saving of 31.4% in annual required cooling energy and 36.8% in the peak cooling load for the BASECASE apartment can be achieved with this approach. However, all the passive strategies have marginal effect on latent cooling load, often less than 1%.

Low energy strategies for high-rise apartments in Hong Kong

High-rise apartments provide 90% of the living requirements in Hong Kong. (Lam 1995) The construction material of these buildings is primarily concrete for both external wall and interior partitions with little or no thermal insulation. Due to the hot and humid climatic conditions and expectations of an ever-increasing standard of living, occupants are installing air-conditioning systems into their apartments. This has generated a tremendous electrical demand as well as an environmental (greenhouse gas emission) concern. This paper explores some of the low energy strategies that can be applied to this building typology. The effect of seven energy-saving strategies ranging from thermal insulation to different window systems and shading devices was investigated. The results show that there is the potential to reduce the annual cooling energy consumption and peak cooling load by 40% and 33% respectively.

The rise and fall of management: undergraduate engineering management education in Australia

The modern disciplines of engineering and management are inextricably linked. Frederick Taylor, Henry Gantt and Henri Fayol are engineers whose names are also part of the history of the theory and practice of management. As far back as 1968 it was identified that, “In all phases of practice in the profession the technical work is coupled, to a greater or lesser extent, with engineering management.” For more than 20 years the call had been increasing for an improvement in the preparation of engineering graduates in the area of management skills. In 1989 the IEAust created the task force on management engineering with the goal of formulating a policy for management education in engineering undergraduate courses. In 1990, the Council of the IEAust approved the Policy on Management Studies in Engineering Undergraduate Courses that said, “From January 1991 the Institution will require at least 5% management content in all professional engineering undergraduate courses and that the total of all management and management related components rises to the vicinity of 10% by 1995.” A 1999 analysis of engineering programs showed that the Policy had been applied with enthusiasm by about one-third of the engineering schools, fairly well in another third, remaining responses were ineffectual. Around the same time, revisions to the IEAust accreditation requirements de-emphasised the importance of management studies, mentioning it only as a subset of ‘professional practice’. By 2004 the IEAust stage 1 competency standards for professional engineers mentioned ‘management’ in only three of 79 indicators of competency. In 2002, the IEAust established the Centre for Engineering Leadership and Management. In December 2005 CELM established a working group, “…for improving the business and management content of undergraduate courses. It appears that it’s back (about 20 years) to the future for Australian undergraduate engineering management education.

The global biopharma industry and the rise of Indian drug multinationals: implication for Australian generics policy

This article provides a synopsis of the new dynamics of the global biopharma industry. The emergence of global generics companies with capabilities approximating those of 'big pharma' has accelerated the blurring of boundaries between the innovator and generics sectors. Biotechnology-based products form a large and growing segment of prescription drug markets and regulatory pathways for biogenerics are imminent. Indian biopharma multinationals with large-scale efficient manufacturing plants and growing R&D capabilities are now major suppliers of Active Pharmaceutical Ingredients (APIs) and generic drugs across both developed and developing countries. In response to generic competition, innovator companies employ a range of life cycle management techniques, including the launch of 'authorised generics'. The generics segment in Australia will see high growth rates in coming years but the prospect for local manufacturing is bleak. The availability of cheap generics in international markets has put pressure on Pharmaceutical Benefits Scheme (PBS) pricing arrangements, and a new policy direction was announced in November 2006. Lower generics prices will have a negative impact on some incumbent suppliers but industrial renewal policies for the medicines industry in Australia are better focused on higher value R&D activities and niche manufacturing of sophisticated products.

The rise and decline of the New South Wales cooperative housing societies

In the past, New South Wales cooperative housing societies made an important contribution to the financing of housing construction. In this paper the expansion and later contraction of the societies is explained. It is shown that, in recent times, not only have they suffered from a drying up of loan funding, but also a great number have operated at far below their possible level of efficiency.

The rise and fall of the internal reserve

The 'internal reserve' distinguished world's best practice for the early garden suburb movement. These 'hidden' spaces were designed for a variety of reasons: to encourage the formation of community, promote safe play for children, offer sites for small-scale agricultural pursuits, address  topographic and drainage constraints, and facilitate conservation of natural features. They were a feature of progressive plans for British icon developments such as Hampstead Garden Suburb. As these plans travelled globally, however, the purpose of the internal reserve was less clear than their spatial form, and most languished as undistinguished, left-over spaces. The historical origins, development and demise of the internal reserve are surveyed, with a focus on the Australian experience against an Anglo-American backdrop.