Reconstituting the invisible out of structure and repetition: a walk through diary V3.2.

This presentation will discuss the production of an interactive personal diary constructed in digital form as an interactive CD-Rom: Diary V 3.2. This diary was conceived as a digital version of the family photo album of the artist's nuclear family, which unfortunately disintegrated during 4 years of the diary's making. As a result Diary V 3.2 became more a documentation of the mood and state of mind of the maker than the family it began to focus on. It acted more as a trace or a remnant of mood, an artifact of loss. This was communicated not so much through narrative but ideas of loss and erasure. Another layer to this work concerns the migration of images, technique from the old analogue technology to the new digital technology which can act as a replay of the migrant experience.

Application of co-operative agents in handling fluctuations in a pull production system

This paper presents the general details of the structure and strategy of a multi-agent system that is being developed to improve the performance of pull (kanban) production control to handle large fluctuations in product demand. Employing a set of generic, heterarchial agents each controlling a single product and co-operating together to ensure that all components, regardless of demand fluctuation, are manufactured on time as per basic kanban principles. Preliminary results indicate that the basic kanban model does not cater for large demand fluctuations and the application of this multi-agent strategy may be beneficial to improving the overall system performance and increase the likelihood that all products will be manufactured on time.

Ultrafine grained structure formation in steels using dynamic strain induced transformation processing

The refinement of ferrite grain size is the most generally accepted approach to simultaneously improve the strength and toughness in steels. Historically, the level of ferrite refinement is limited to 5-10 μm using conventional industrial approaches. Nowadays, though, several thermomechanical processes have been developed to produce ferrite grain sizes of 1-3 μm or less, ranging from extreme thermal and deformation cycles to more typical thermomechanical processes. The present paper reviews the status of the production of ultrafine grained steels through relatively simple thermomechanical processing. This requires deformation within the Ae3 to Ar3 temperature range for a given alloy. Here, the formation of ultrafine ferrite (UFF) involves the dynamic transformation of a significant volume fraction of the austenite to ferrite. This dynamic strain induced transformation (DSIT) arises from the introduction of extensive intragranular nucleation sites that are not present in conventional controlled rolling. The DSIT route has the potential to be adjusted to suit current industrial infrastructure. However, there are a number of significant issues that have been raised, both as gaps in our understanding and as obstacles to industrial implementation. One of the critical issues is that it appears that very large strains are required. Combined with this concern is the issue of whether a combination of dynamic and static transformation can be used to achieve an adequate level of refinement. Another issue that has also become apparent is that grain sizes of 1 μm can lead to low levels of ductility and hence many workers are attempting to obtain 2-3 μm grains, or to introduce a second phase to provide the required ductility. There are also a number of areas of disagreement between authors including the role of dynamic recrystallisation of ferrite in the production of UFF by DSIT, the reasons for the low coarsening rate of UFF grains, the role of microalloying elements and the effects of austenite grain size and strain rate. The present review discusses these areas of controversy and highlights cases where experimental results do not agree.

Efficient production of ZnO nanowires by a ball milling and annealing method

ZnO powder was mechanically milled in a ball mill. This procedure was found to greatly increase its evaporation ability. The anomalous evaporation behaviour was caused by the disordered structure of the milled material and was not related to the increase in its surface area after milling. ZnO nanowires were synthesized by evaporation of this milled precursor. Nanowires with smooth and rough surfaces were present in the sample; the latter morphology was dominant. A green emission band centred at 510 nm was dominant in the cathodoluminescence spectrum of the nanowires.

Current knowledge of the environmental influences on Australian cashmere production and quality

Goat fibre production is affected to a similar extent by genetic and environmental influences. Environmental influences include bio-geophysical factors (photoperiod, climate-herbage system and soil-plant trace nutrient composition), country of origin, nutrition factors (live weight, growth patterns) and management factors (farm, herd age and sex structure). Nutrition and management influences discussed include rate of stocking, energy nutrition, live weight change, parturition and management during shearing. The nutritional variation within and among years is the most important climatic factor influencing cashmere production, fibre diameter and fibre curvature (crimp). With productive cashmere goats, large responses to energy supplementation have been measured with optimum nutritional management. The effects and importance of management and hygiene during fibre harvesting (shearing) in producing quality fibre are emphasised.

Culture clash : artistic production and the school environment

Artists-in-schools programs involving contemporary art practices can be transformational for the participants when environmental considerations are integral to the planning and structure of the project and both the form and content of the program are reflected upon critically.

Schooling and the production of social inequalities : what can and should we be doing?

To speak of an ideal is to lay claim to what ought or should be and to explain 'reality' as deviation. That is, ideals serve to provide direction towards some desired goal as well as judgment about how well a perceived reality approximates that desire. In more recent times, the postmodernist critique has provided its own 'reality check' on modernist ideals, challenging the notion that there is one best way to reach Utopian ends. The emergence of postmodern theories has signalled a general shift in 'the structure of feeling'1 from acquiescence to censure of the universal. But it is not as if there are no postmodern ideals. In these accounts, utopianism is more cogently understood as 'heterotopianisms'. While we are convinced by such critique, that there are diverse goals of value and pathways to reach them, we admit to some uneasiness about a 'postmodern pluralism' in which ideals have die potential to wash away into relativism, where one ideal is as good as the next and ways of achieving them are also equally regarded.

Pheromone production, male abundance, body size, and the evolution of elaborate antennae in moths

The males of some species of moths possess elaborate feathery antennae. It is widely assumed that these striking morphological features have evolved through selection for males with greater sensitivity to the female sex pheromone, which is typically released in minute quantities. Accordingly, females of species in which males have elaborate (i.e., pectinate, bipectinate, or quadripectinate) antennae should produce the smallest quantities of pheromone. Alternatively, antennal morphology may be associated with the chemical properties of the pheromone components, with elaborate antennae being associated with pheromones that diffuse more quickly (i.e., have lower molecular weights). Finally, antennal morphology may reflect population structure, with low population abundance selecting for higher sensitivity and hence more elaborate antennae. We conducted a phylogenetic comparative analysis to test these explanations using pheromone chemical data and trapping data for 152 moth species. Elaborate antennae are associated with larger body size (longer forewing length), which suggests a biological cost that smaller moth species cannot bear. Body size is also positively correlated with pheromone titre and negatively correlated with population abundance (estimated by male abundance). Removing the effects of body size revealed no association between the shape of antennae and either pheromone titre, male abundance, or mean molecular weight of the pheromone components. However, among species with elaborate antennae, longer antennae were typically associated with lower male abundances and pheromone compounds with lower molecular weight, suggesting that male distribution and a more rapidly diffusing female sex pheromone may influence the size but not the general shape of male antennae.

Narrative structure analysis with education and training videos for e-learning

This paper deals with the problem ofstructuralizing education and training videos for high-level semantics extraction and nonlinear media presentation in e-learning applications. Drawing guidance from production knowledge in instructional media, we propose six main narrative structures employed in education and training videos for both motivation and demonstration during learning and practical training. We devise a powerful audiovisual feature set, accompanied by a hierarchical decision tree-based classification system to determine and discriminate between these structures. Based on a two-liered hierarchical model, we demonstrate that we can achieve an accuracy of 84.7% on a comprehensive set of education and training video data.

Data gathered during investigations into the ecofriendly production of bamboo fibres having UV-screening and antibacterial properties

This dataset comprises morphological image-based data of the cross and longitudinal sections of the powder particles and fibres of the bamboo plant, gathered using the Scanning Electron Microscope (SED). The morophology of the treated and untreated samples was compared before and after several chemical treatments. The diameter of the fibre and porous structure was measured, giving an indication of particle size.

A controllable simple method for production of polymeric nanofiberous composite via single nozzle jet electrospinning

A special Micro-Nano fiberous composite structure composed of nano- and micro-scale fiber of Polycaprolactone (PCL) and Gelatin produced by using single nozzle electrospinning instrument. By controlling the solution (polymer concentration and polymer composition percent) and processing parameters of electrospinning (feed rate and electrostatic field), different portion of nano and micro fibers in the structure is achieved. This method can result a one-stage method of fabrication of Micro-Nano fiberous composite structure instead of previously used twostage process or using additional facility to produce structure near-similar to this composite structure. The resulting materials finely mingle nano- and micro fibers together, rather than simply juxtaposing them, as is commonly found in the literature. The results obtained from SEM, Flow Porosimetry, and DMA led the authors to confirm that the structure has very versatile and improved properties for many applications like cell culture scaffolds. These favourable mechanical and structural properties can provide easier opening of spaces for cell penetration to deeper levels of the scaffold and withstand to tensions during to clinical handling.

Current status of biotechnological production of the cholesterol lowering drug lovastatin and its biomedical applications

Lovastatin is a potent hypercholesterolemic drug used for lowering blood cholesterol. It acts by competitively inhibiting the enzyme, 3-hydroxy-3-methylglutaryl coenzyme A reductase involved in the biosynthesis of cholesterol. It is produced by a variety of filamentous fungi including Penicillium species, Monascus ruber and Aspergillus terreus as a secondary metabolite. Production of lovastatin by biotechnology decreases the production cost compared to costs of chemical synthesis. In recent years, lovastatin has also been reported as a potential therapeutic agent for the treatment of various types of tumors and also play a tremendous role in the regulation of the inflammatory and immune response, coagulation process, bone turnover, neovascularization, vascular tone, and arterial pressure. This review focus on the structure, biosynthesis, biotechnological production and biomedical applications of lovastatin.

Facile fabrication of polyolefin/carbon nanotube composites via in situ friedel-crafts polyalkylation : structure and properties

Despite major advances in addressing the dispersion of carbon nanotubes (CNTs) in polymers and their interfacial interactions, exploring a facile approach for massively creating them is still fascinating. We interestingly find that the CNT dispersion is considerably improved in polypropylene (PP), and ?19.1 wt % of PP chains were in situ chemically grafted onto CNT surfaces only using a trace of AlCl3 via a one-step melt-blending. Compared with the PP/CNT composite, adding 0.2 wt % of AlCl3 enables an increase in tensile strength and Young's modulus of 30% and 25%, respectively. Moreover, the elongation at break is almost maintained, while adding CNTs alone causes significant decreases. Additionally, 0.2 wt % AlCl3 makes the thermal degradation temperature further improved. These remarkable improvements in properties are mainly attributed to better dispersion of CNTs and enhanced interfacial compatibility. This work opens up an innovative approach for scalable preparation of polyolefin/CNT composites applying to industrial production.