Sound absorption characteristics of a precast panel system made from environmentally sustainable concrete

This paper investigates the sound absorption characteristics of a precast panel system made from an environmentally sustainable concrete which can be used as an acoustical material. A current research project undertaken at the School of Architecture and Building, Deakin University, aims at utilising alternative materials and innovative approach to concrete precasting in the production of architecturally pleasing concrete panels. The normal incidence sound absorption coefficients of the assemblies were measured using an impedance tube. In general, the peak frequencies reduced with increasing thickness of concrete. The preliminary results indicate that the sound absorption of a three-layer variation of the panel meet design specifications related to acoustic performance. The major benefits of this investigated approach to concrete and concrete precasting are the ease of tunability to specific peak frequency, improved aesthetics and utilisation of industrial waste.

On the acoustic performance of a precast panel system made from environmentally sustainable concrete : application in sports hall buildings

The use of green building materials and products promotes conservation of non-renewable resources and help reduce associated environmental impacts. This article reports the acoustical performance of a precast panel system made largely from concrete waste material. Two major applications for such panels that are being investigated currently include walls and claddings to industrial and commercial buildings and sound barriers for urban freeways. In this study, the application of the concrete panels for optimizing reverberation time (RT) in sports halls is tested using numerical simulations. As an innovative approach, additional layers are added to the precast panels to improve their appearance. The absorption coefficients of the concrete panel improved significantly with the architectural finish. The material can be tuned according to the required peak frequency. The architectural finish helped reduce the RT for frequencies above 500 Hz. Its application to different types of ceilings revealed that the RT of curved ceiling reduced up to 40% compared to flat and hybrid ceiling. A comparison of wall and ceiling modifications in small, medium and large sports halls showed that medium-sized halls have better acoustical performance compared with small and large halls with ceiling as well as wall treatment.

Compressive and flexural properties of hemp fiber reinforced concrete

The compressive and flexural properties of hemp fiber reinforced concretes (FRC) were examined in this paper. Natural hemp fiber was mixed using dry and wet mixing methods to fabricate the FRC. Mechanical properties of the FRC were investigated. The main factors affecting compressive and flexural properties of the FRC materials were evaluated with an orthogonal test design. Fiber content by weight has the largest effect. The method for casting hemp FRC has been optimised. Under the optimum conditions, compressive strength increased by 4 %, flexural strength increased by 9 %, flexural toughness increased by 144 %, and flexural toughness index increased by 214 %.

Performance of a commercial wine store with insulated concrete walls

The internal environment within an unconditioned wine barrel store, constructed from insulated concrete panels and located in south-eastern Australia, has been investigated during a summer and winter month. Average temperatures inside the store were found to be 13.7°C and 22.8°C in the winter and summer month respectively. A validated mathematical model of the store was used to investigate the contribution of the concrete walls, insulation and the wine itself to the internal thermal environment. The concrete walls were found to be the least influential.

Properties of hemp fibre reinforced concrete composites

This research is concerned with the mechanical and physical properties of hemp fibre reinforced concrete (HFRC). An experimental program was developed based on the statistical method of fractional factors design. The variables for the experimental study were: (1) mixing method; (2) fibre content by weight; (3) aggregate size; and (4) fibre length. Their effects on the compressive and flexural performance of HFRC composites were investigated. The specific gravity and water absorption ratio of HFRC were also studied. The results indicate that the compressive and flexural properties can be modelled using a simple empirical linear expression based on statistical analysis and regression, and that hemp fibre content (by weight) is the critical factor affecting the compressive and flexural properties of HFRC.

Performance of ventilated hollow core concrete panel systems in Australia

Performance of advanced fabric energy storage systems has not been reported for Australian conditions. The influence pf slab thickness and air flow rate on the annual thermal load, and maximum heating and cooling demands for a typical office module using a ventilated hollow core concrete slab system has been investigated by simulation. Performance results for Melbourne are presented and comments made on other locations.

Modeling and simulation of collisions of heavy trucks with concrete barriers

On-site collision tests of full-scale concrete barriers are an important method to understand what happens to concrete barriers when vehicles collide with them. However, such tests require both time and money, so modeling and simulation of collisions by computer have been developed as an alternative in this research. First, spring subgrade models were developed to formulate the ground boundary of concrete barriers based on previous experiments. Then, the finite element method models were developed for both heavy trucks and concrete barriers to simulate their dynamic collision performances. Comparison of the results generated from computer simulations and on-site experiments demonstrates that the developed models can be applied to simulate the collision of heavy trucks with concrete barriers, to replicate the movement of the truck at the collision, and to investigate the performance of the concrete barriers. The developed research methodology can be widely used to support the design of new concrete barriers and the safety analysis of existing ones.

Dynamic simulation of collisions of heavy high-speed trucks with concrete barriers

Real vehicle collision experiments on full-scale road safety barriers are important to determine the outcome of a vehicle versus barrier impact accident. However, such experiments require large investment of time and money. Numerical simulation has therefore been imperative as an alternative method for testing concrete barriers. In this research, spring subgrade models were first developed to simulate the ground boundary of concrete barriers. Both heavy trucks and concrete barriers were modeled using finite element methods (FEM) to simulate dynamic collision performances. Comparison of the results generated from computer simulations and on-site full-scale experiments demonstrated that the developed models could be applied to simulate the collision of heavy trucks with concrete barriers to provide the data to design new road safety barriers and analyze existing ones.