New insights into the structures of diorganotellurium Oxides. The first polymeric diorganotelluroxane[(p-MeOC6H4)2TEO]n

The characterization of the previously reported diorganotellurium oxides R₂TeO (R = Ph (1) and p-MeOC₆H₄ (2)) was revisited by osmometric molecular weight determinations, ¹²⁵Te NMR spectroscopy, and electrospray spectrometry (ESMS) in solution and by 125Te MAS NMR spectroscopy in the solid state. The single-crystal X-ray structure of 2 revealed a polymeric arrangement that features a zigzag configured Te-O backbone without any secondary Te···O interactions. In solution 1 and 2 exist predominantly as monomers but appear to be in equilibrium with higher oligomers to a minor extent.

A comparative study on preparation of TiO2 pellets as photocatalysts based on different precursors

The porous Ti0₂ pellets were prepared based on pigment grade titaina, P25 titania powder and titaniurn(lV) butoxide. The characterization was done with X-Ray diffraction, scanning electron microscopy and BET measurements. The result shows that Ti0₂ pellets by using titaniurn(IV) butoxide with some addictive have the best surface porosity, with specific surface area of 196.9m²/g. For pigment grade titania and P25 titania powder, it is still effective to enhance the surface area after reassembling. The surface area increased from 11.6 to 29.2 m²/g for pigment grade titania and from 50 to 84.4 m²/g for P25 titania powder. Furthermore, it has been investigated on how to optimize and get the highest surface area by controlling the sintering temperature, reaction temperature, pH of solution, and the amount of alcohol and addictive of surfactant during preparation. The experimental photocatalytic degradation of acetone and toluene was performed using titania pellets made from P25 titania powder.

Psychosocial precursors and correlates of differing internalizing trajectories from 3 to 15 years

Psychosocial precursors and correlates of parent-reported internalizing behavior trajectories across the age span of 3–15 years were explored using a community-based cohort of Australian children. Six internalizing trajectories had previously been identified for both girls (N = 810) and boys (N = 874) in this sample, comprising stable low, high, decreasing, and increasing pathways. Infancy and toddler temperamental traits (inhibition/shyness, irritability), behavior problems, and parent–child relationship difficulties constituted significant risks for subsequent problematic internalizing profiles. Several gender-specific trends were evident, with temperamental reactivity and shyness, less optimal parenting, and peer difficulties more salient for girls on increasing trajectories whereas externalizing problems were more prominent among boys on increasing trajectories. Factors associated with recovery from elevated symptoms included higher levels of social competence, better parent and peer relations, and more positive school adjustment. Findings suggest that individual characteristics and relationship experiences may be involved in the development and course of internalizing problems.

Longitudinal examination of physical and relational aggression as precursors to later problem behaviors in adolescents

Research has addressed the consequences of being a victim of physical and relational aggression but less so the consequences of being an aggressor during adolescence. Consequently, relatively little is known about the extent to which aggression in early adolescence increases the risk of later aggression and other psychosocial problems. This study involves a representative sample of seventh- and ninth-grade students from Washington State ( N = 1,942). Students were surveyed on recruitment and then again 1 and 2 years later to learn about ongoing behavior problems, substance use, depression, and self-harm behaviors. Surveys also included measures of several hypothesized promotive factors: attachment to family, school commitment, and academic achievement. Findings suggest that being physically and/or relationally aggressive in grades 7 to 9 increases the risk of aggression and possibly other problem behaviors after accounting for age, gender, race, and a prior measure of each outcome. Independent promotive effects were observed in most analyses, although family attachment appeared a less robust predictor overall. Implications for prevention include acting on the behavior itself and enhancing promotive influences to lessen the risk of agression and other related problems.

Organotin-oxo clusters

This thesis reports on the development and expansion of reliable synthetic di-and multi-tin precursors for the assembly of oligomeric organotin-oxo compounds in which the shape, dimension and tin nuclearity can be controlled. The reaction of polymeric diorganotin oxides, (R2SnO)m (R = Me, Et, n-Bu, n-Oct, c-Hex, i-Pr, Ph), with saturated aqueous NH4X solutions (X = F, Cl, Br, I, OAc) in refluxing 1,4-dioxane afforded in high yields dimeric tetraorganodistannoxanes, [R2(X)SnOSn(X)R2]2, and in a few cases diorganotin dihalides or diacetates, R2SnX2. This method appears to be particularly good for the synthesis of halogenated tetraorganodistannoxanes but a less suitable method for the preparation of dicarboxylato tetraorganodistannoxanes. Identification of [R2(OH)SnOSn(X)R2]2 (R = n-Bu; X = Cl, Br) and [R2(OH)SnOSn(X)R2][R2(X)SnOSn(X)R2] suggest a serial substitution mechanism starting from [R2(OH)SnOSn(OH)R2]2. A series of α, ω -bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n (n = 3-8, 10, 12) and some of their derivatives were synthesised and characterised. These α, ω-bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n were converted to the corresponding halides [R(Cl)2Sn]2(CH2)n (R = CH2SiMe3) and subsequently to the polymeric oxides {[R(0)Sn]2(CH2)n}m. Reaction of {[R(O)Sn]2(CH2)n}m with [R(Cl)2Sn]2(CH2)n. (n = 3, n' = 4 and n = 4, n' = 3) in toluene at 100°C results in a mixture of symmetric and asymmetric double ladders, where different spacer chain lengths (n and n') provide the source of asymmetry. The coexistence at high temperature of separate 119Sn NMR signals belonging to symmetric and asymmetric double ladders suggests an equilibrium that is slow on the 119Sn NMR time scale and the position of which is temperature dependent. However, 119Sn NMR spectroscopic experiments of {[R(0)Sn]2(CH2)3}m with [R(Cl)2Sn]2(CH2)n for longer spacers (n - 5, 6, 8, 10, 12) reveal that molecular self-assembly of symmetric spacer-bridged di-tin precursors of equal chain length is preferred over asymmetric species. An ether-bridged di-tin tetrachloride [R(Cl)2Sn(CH2)3]2O (R = CH2SiMe3) and its corresponding polymeric oxide {[R(O)Sn(CH2)3]2O}m were synthesised and characterised. Reaction of [R(Cl)2Sn(CH2)3]2O with {[R(O)Sn(CH2)3]2O}m results in a unique functionalised double ladder {{[RSn(Cl)](CH2)3O(CH2)3[RSn(Cl)]}O}4 whose structure in the solid state was determined by X-ray analysis. Identification of tetrameric functionalised double ladder as well as dimeric and monomeric species suggest the existence of an equilibrium in solution. The feasibility of the functionalised double ladder to form host-guest complexes with a variety of metal cations is investigated using electrospray mass spectrometry (ESMS). Evidence for such complexes is found only for sodium cations. The reaction between {[R(O)Sn]2(CH2)n}m (n = 3, 4, 8, 10) and triflic acid is described. The initial formed products [RSn(CH2)nSnR](OTf)4 are easily hydrolysed. For n = 3, self-assembly leads to a discrete double ladder type structure, {{[RSn(OH)](CH2)3[RSn(H2O)]}O}44OTf, which is the first example of a cationic double ladder. For n ≥ 3, hydrolysis gives polymeric products, as demonstrated by the crystal structure of {[(H2O)(OH)RSn]2(CH2)4-2OTf2H2O}m. Two spacer-bridged terra-tin octachlorides [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)n (R = CH2SiMes; n = 1, 8) and their corresponding polymeric oxides {[R(O)Sn(CH2)3Sn(O)]2(CH2)n}m were successfully synthesised and characterised. Attempts were made to synthesise quadruple ladders from these precursors. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2CH2 with {[R(O)Sn(CH2)3Sn(O)]2CH2}m or (Y-Bu2SnO)3 result in, mostly insoluble, amorphous solids. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)8 with {[R(O)Sn(CH2)3Sn(O)]2(CH2)8}m or (t-Bu2SnO)s result in new tin-containing species which are presumably oligomeric. The synthesis of a series of alkyl-bridged di-tin hexacarboxylates [(RCO2)3Sn]2(CH2)n (n = 3, 4; R = Ph, c-C6H11, CH3, C1CH2) is also reported. The hydrolysis of these compounds is facile and complex. There appears to be no correlation between spacer chain length and hydrolysis product. However, the conjugate acid strength of the carboxylate does appear to be important. In general only insoluble amorphous polymeric organotin-oxo compounds were obtained.

Characterization of the moisture absorption and thermal ageing behaviour of polymeric composite systems using Raman spectroscopy

Advanced polymeric materials and their respective composites are fast becoming one of the world's most frequently used engineering materials. They find application in the manufacture of e.g. boat hulls, high performance motor vehicles, aircraft components and sports goods. Their high specific strength and specific stiffness give them the edge in applications where weight savings are critical, but their long-term durability is often questioned. These materials are susceptible to environmental conditions such as temperature and humidity. There is also a lack of relevant data, due to the long time-scales required for testing. In this study, the Raman technique has been used to monitor the degradation of two composite systems, namely: a rubber toughened vinylester material used in the marine industry and a high temperature bismaleimide/carbon fibre aerospace composite. Preliminary Raman studies show that the toughening rubber particles dispersed in the cured vinylester resin are leached out during hygrothermal ageing. The weight gain during ageing suggests that this leaching process occurs concurrently with the absorption of water molecules. An increase in the degree of cross-linking is observed when bismaleimide/carbon fibre composite is aged at high temperature. This cross- linking tendency decreases with increasing depth within the carbon fibre bundle.

Ionic conductivity studies of polymeric electrolytes containing lithium salt with plasticizer

New plasticized polymer electrolytes were synthesized based on poly ethylene oxide (PEO), Poly (N,N-dimethylamino-ethyl-methacrylate) (PDMAEMA), LiN(CF₃SO₂)₂ (LITFSI) as the salt and tetraethylene glycol dimethyl ether(tetraglyme) and EC + PC as plasticizers. The preparation and characterization of the polymer electrolytes were investigated as a function of temperature and various concentrations of LITFSI. Impedance spectroscopy and differential scanning calorimeter (DSC) were used to characterize the effects of various temperature, lithium salt concentration and two plasticizers on conductivity. The complex of PDMAEMA/PEO/LiTFSI/tetraglyme (S2) exhibits higher conductivity (4.74 × 10⁻⁴ S cm⁻¹at 25 °C) than PDMAEMA/PEO/LiTFSI/EC + PC (S1).

Superhydrophobic fabrics from hybrid silica sol-gel coatings: Structural effect of precursors on wettability and washing durability

Particle-containing silica sol was synthesized by co-hydrolysis and co-condensation of two silane precursors, tetraethylorthosilicate (TEOS) and an organic silane composed of a non-hydrolyzable functional group (e.g., alkyl, flourinated alkyl, and phenyl), and used to produce superhydrophobic coatings on fabrics. it has been revealed that the non-hydrolyzable functional groups in the organic silanes have a considerable influence on the fabric surface wettability. When the functional group was long chain alkyl (C16), phenyl, or flourinated alkyl (C8), the treated surfaces were highly superhydrophobic with a water contact angle (CA) greater than 170°, and the CA value was little affected by the fabric type. The washing durability of the superhydrophobic coating was improved by introducing the third silane containg epoxide group, 3-glycidoxypropyltrimethoxsilane (GPTMS), for synthesis. Although the presence of epoxide groups in the coating slightly reduced the fabrics' superhydrophobicity, the washing durability was considerably improved when polyester and cotton fabrics were used as substrates.

Shear-enhanced solution precipitation : a simple process to produce short polymeric nanofibers

The growing interest in polymeric nanofibers has been increasing the push for the development of simple and efficient nanofiber-preparation techniques. We herein describe how a conventional solution process is readapted to suit the needs for fast and efficient production of short polymeric nanofibers. Poly(ethylene-co-acrylic acid) (PEAA), a semi-crystalline polymer, was used as model. When a PEAA solution was injected into an alcoholic non-solvent while simultaneously applying high shear to the non-solvent system, PEAA nanofibers were obtained with average diameter as thin as 113 nm and length as short as 4.5 _m. The fiber diameter and length were also adjustable by varying the operating parameters. This one-step technique advances the currently available nanofabrication tools by adjusting a widely accepted concept to the nano-scale. It may constitute a viable method for large-scale production of short polymeric nanofibers.

One-dimensional polyelectrolyte/polymeric semiconductor core/shell structure : sulfonated poly(arylene ether ketone)/polyaniline nanofibers for organic field-effect transistors

A polyelectrolyte/polymeric semiconductor core/shell structure is developed for organic field-effect transistors (OFETs) based on sulfonated poly(arylene ether ketone)/polyaniline core/shell nanofibers via electrospinning and solution-phase selective polymerization. The polyelectrolyte does not work as a gate dielectric, but can provide an internal modulation from the nanointerface of the 1D core/shell nanostructure. The transistor devices display very high mobilities.

Controlling morphology and porosity of porous siloxane membranes through water content of precursor microemulsion

Here we report a facile method for controlling the morphology and porosity of porous siloxane membranes through manipulation of the water content of precursor microemulsions. The polymerizable microemulsion precursors consisted of a methacrylate-terminated siloxane macromonomer (MTSM) as the oil phase, nonionic surfactant (Teric G9A8), water, and cosurfactant (isopropanol). Photo-polymerization of the oil phase in the parent microemulsion solutions resulted in polymeric solids, and subsequent removal of the extractable components yielded porous PDMS membranes. The pre-cured parent microemulsion solutions and post-cured polymers were characterized by small angle X-ray scattering (SAXS) while the nanostructures of extracted porous polymer membranes were characterized by SAXS, scanning electron microscopy (SEM) and mercury porosimetry. The results indicated that nano- and micro-structures of the membranes could be modulated by the water content of the precursor microemulsions. Further, in situ photo-rheometry was used to follow the microemulsion polymerization process. The rate of polymerization and the mechanical properties of the resulting PDMS membranes also depend on the water content of precursor microemulsions. This study demonstrates a simple approach to the fabrication of a variety of novel porous PDMS membranes with controllable morphology and porosity.