Compact stacked planar inverted-F antenna for passive deep brain stimulation implants

A compact meandered three-layer stacked circular planar inverted-F antenna is designed and simulated at the UHF band (902.75 – 927.25 MHz) for passive deep brain stimulation implants. The UHF band is used because it offers small antenna size, and high data rate. The top and middle radiating layers are meandered, and low cost substrate and superstrate materials are used to limit the radius and height of the antenna to 5 mm and 1.64 mm, respectively. A dielectric substrate of FR-4 of εr= 4.7 and δ= 0.018, and a biocompatible superstrate of silicone of er= 3.7 and d= 0.003 with thickness of 0.2 mm are used in the design. The resonance frequency of the proposed antenna is 918 MHz with a bandwidth of 24 MHz at return loss of −10 dB in free space. The antenna parameter such as 3D gain pattern of the designed antenna within a skin-tissue model is evaluated by using the finite element method. The compactness, wide bandwidth, round shape, and stable characteristics in skin make this antenna suitable for DBS. The feasibility of the wireless power transmission to the implant in the human head is also examined.

Multi-layer implantable antenna for closed loop deep brain stimulation system

A multi-layer circular planar inverted-F antenna is designed and simulated at the industrial, scientific, and medical (ISM) band of 915 MHz for closed loop deep brain stimulation implant. The ISM band is considered due to the capabilities of small antenna size, high data rate, and long transmission range. In the proposed four-layer antenna, the top three radiating layers are meandered, and a high permittivity substrate and superstrate materials are used to limit the radius and the height of the antenna to 3.5 mm and 2.2 mm, respectively. The bottom layer works as a ground plate. The Roger RO3210 of εr = 10.2 and δ = 0.003 is used as a dielectric substrate and superstrate. The resonance frequency of the proposed antenna is 915 MHz with a bandwidth of 12 MHz at the return loss of -10 dB in free space. The stacked layered structure reduces the antenna size, and the circular shape makes it easily implantable into the human head. The antenna parameters (e.g. 3D gain pattern), SAR value, and electric field distribution within a six layers spherical head model are evaluated by using the finite element method (FEM). The feasibility of the wireless transmission of power, control and command signal to the implant in the human head is also examined. © 2012 IEEE.

Design and analysis of an antenna for batteryless transcranial direct current stimulation devices

The purpose of this study is to design a low-cost planar Archimedean dipole antenna for batteryless transcranial direct current stimulation devices. The antenna parameters including resonance frequency, radiation efficiency, radiation pattern, and gain are simulated using finite difference time domain based electromagnetic simulation software XFdtd. The proposed antenna is simulated with low-cost FR4 PCB substrate of thickness of 1.6 mm. The antenna is designed with half wavelength of resonant frequency and fed with a matching line. The target frequency band is the industrial, scientific and medical (ISM) band of 915 MHz which is in the simulated band width of 31 MHz (903-934MHz). Moreover, since the bio-effect of specific absorption rate by radio frequency electromagnetic wave for power harvesting is an important concern, we try to find out the safety limit. Thus a quantitative analysis of distributions of electric field and power absorption in anatomical human head model by the far field radio frequency energy received by our designed antenna has been presented.

Reconstruction of the refractive index profile of planar waveguides using ray tracing analysis

We propose a method for refractive index profiling based on measuring coordinates and angles of laser beams passing across the waveguide layer. Calculations are performed by solving an integral equation using new global optimization methods.

Precoder design for multi-antenna systems with temporally and spatially correlated fading channels

This paper addresses the problem of the design of a precoder for multiple transmit antenna communication systems with spatially and temporally correlated fading channels. Using the theories of matrix differential calculus, the paper derives a precoder for unitary space-time codes that can exploit the spatio-temporal correlation in the time-varying fading channels. The design criterion is based on minimizing the mean square error of the channel estimates. Computer simulation results show that a significant performance gain can be achieved by using the designed precoder.

Differential encoding technique for multi-antenna systems with correlated Rayleigh fading channels

Differential space-time modulation (DSTM) techniques developed for multi-antenna systems allow the receiver to detect the transmitted signal without the knowledge of the fading channels. It can be viewed as an extension of differential phase-shift keying (DPSK) in single antenna systems. In this paper, we derived the pairwise error probability upper bound of differential space-time coded systems with spatially correlated Rayleigh fading channels. Based on the performance analysis, we develop a novel DSTM scheme which can exploit the spatial correlation in the fading channels. It is found that by carefully designing the initial transmitted signal matrix, the performance of the differential space-time coded systems can be significantly improved.

Planar receiver placement for unique emitter localization for indoor applications

This paper investigates two independent approaches to verify the necessary and sufficient condition to guarantee a unique solution for a passive emitter localization system based on time difference of arrival measurements from an
array of sensors.

Planar waveguide refractive index profile reconstruction using global optimization

The approach taken here of reconstruction of the refractive index profile of planar waveguides involves solving a non-linear integral equation with Tikhonov regularization. Using global optimization with the new cutting angle and discrete gradient methods has yielded an acceptable reconstruction, even in the presence of significant noise in the data.

Characterization of supported cylinder-planar germanium waveguide sensors with synchrotron Infrared radiation

Cylinder-planar Ge waveguides are being developed as evanescent-wave sensors for chemical microanalysis. The only non-planar surface is a cylinder section having a 300-mm radius of curvature. This confers a symmetric taper, allowing for direct coupling into and out of the waveguide's 1-mm² end faces while obtaining multiple reflections at the central <30-μm-thick sensing region. Ray-optic calculations indicate that the propagation angle at the central minimum has a strong nonlinear dependence on both angle and vertical position of the input ray. This results in rather inefficient coupling of input light into the off-axis modes that are most useful for evanescent-wave absorption spectroscopy. Mode-specific performance of the cylinder-planar waveguides has also been investigated experimentally. As compared to a blackbody source, the much greater brightness of synchrotron-generated infrared (IR) radiation allows a similar total energy throughput, but restricted to a smaller fraction of the allowed waveguide modes. However, such angle-selective excitation results in a strong oscillatory interference pattern in the transmission spectra. These spectral oscillations are the principal technical limitation on using synchrotron radiation to measure evanescent-wave absorption spectra with the thin waveguides.

Symmetrically tapered <30-micron-thick quasi-planar Ge waveguides as chemical sensors for microanalysis

Symmetrically tapered planar IR waveguides have been fabricated by starting with a ZnS coated concave piece of single-crystal Ge, embedding it in an epoxide resin as a supporting substrate, and then grinding and polishing a planar surface until the thickness at the taper minimum is <30 μm. Such tapering is expected to enhance a waveguide's sensitivity as an evanescent wave sensor by maximizing the amount of evanescent wave energy present at the thinnest part of the waveguide. As predicted by theory, the surface sensitivity, i.e., the absorbance signal per molecule in contact with the sensing region, increases with decreasing thickness of the tapered region even while the total energy throughput decreases. The signal-to-noise ratio obtained depends very strongly on the quality of the polished surfaces of the waveguides. The surface sensitivity is superior to that obtained with a commercial Ge attenuated total reflection (ATR) accessory for several types of sample, including thin films (<10 ng) and small volumes (<1 μL) of volatile solvents. By using the waveguides, light-induced structural changes in the protein bacteriorhodopsin were observable using samples as small as ∼50 pmol (∼1 μg). In addition, the waveguide sensors can reveal the surface compositions on a single human hair, pointing to their promise as a tool for forensic fiber analysis.

A family of planar parallel manipulators

A family of planar parallel manipulators is investigated and some novel members are proposed. The common feature of the studied manipulators is that the rotation axes of the actuated arms coincide. This feature makes it possible to rotate the whole arm system an infinite number of revolutions around the center of the manipulator. The result is a large workspace in relation to the footprint. Both 2- and 3-DOF variants are presented and the suitability of this family of manipulators for kinematic analysis is demonstrated. Thus, different methods to find optimal manipulability with respect to platform positioning and rotation have been analyzed.

Antenna selection and channel estimation for hybrid relay systems

The research addressed performance issues for wireless signal transmission and has shown that performance improves with the help of relays due to increased diversity. Further, the areas of antenna selection and channel estimation and modelling has been investigated for improved cost and complexity and has shown to further enhance the performance of the wireless relay systems.

Design of a miniature UHF PIFA for DBS implants

This paper presents design and simulation of a miniature rectangular spiral planar inverted-F antenna (PIFA) at UHF RFID band (902.75 - 927.25 MHz) for integration in batteryless deep brain stimulation implants. Operation in the UHF band offers small antenna size and longer transmission range. The proposed antenna has the dimensions of 10 mm × 11.5 mm × 1.6 mm, resonance frequency of 920 MHz with a bandwidth of 18 MHz at return loss of -10 dB. A dielectric substrate of FR-4 of εr = 4.5 and δ = 0.018 with thickness of 1.5644 mm is used in this design. The resonance, radiation characteristics as well as the specific absorption rate distribution induced by the designed antenna within a four layer spherical head model is evaluated by using electromagnetic modeling software which employs the finite element method.

Design and analysis of an antenna for wireless energy harvesting in head-mountable DBS device

This paper presents design and simulation of a circular meander dipole antenna at the industrial, scientific, and medical band of 915 MHz for energy scavenging in a passive head-mountable deep brain stimulation device. The interaction of the proposed antenna with a rat body is modeled and discussed. In the antenna, the radiating layer is meandered, and a FR-4 substrate is used to limit the radius and height of the antenna to 14 mm and 1.60 mm, respectively. The resonance frequency of the designed antenna is 915 MHz and the bandwidth of 15 MHz at a return loss of -10 dB in free space. To model the interaction of the antenna with a rat body, two aspects including functional and biological are considered. The functional aspect includes input impedance, resonance frequency, gain pattern, radiation efficiency of the antenna, and the biological aspect involves electric field distribution, and SAR value. A complete rat model is used in the finite difference time domain based EM simulation software XFdtd. The simulated results demonstrate that the specific absorption rate distributions occur within the skull in the rat model, and their values are higher than the standard regulated values for the antenna receiving power of 1W.