Performance and anthropometric characteristics of prospective elite junior Australian footballers : a case study in one junior team

The aim of the study was to compare anthropometric and physical performance data of players who were selected for a Victorian elite junior U18 Australian rules football squad. Prior to the selection of the final training squad, 54 players were assessed using a battery of standard anthropometric and physical performance tests. Multivariate analysis (MANOVA) showed significant (p < 0.05) differences between selected and non-selected players when height, mass, 20-m sprint, agility and vertical jump height were considered collectively. Univariate analysis revealed that the vertical jump was the only significant (p < 0.05) individual test and a near significant trend (p = 0.07) for height differentiating between selected and non-selected players with medium effect sizes for all other tests except endurance. In this elite junior football squad, physical characteristics can be observed that discriminate between players selected and non-selected, and demonstrates the value of physical fitness testing within the talent identification process of junior (16–18 years) players for squad and/or team selection. Based on MANOVA results, the findings from this study suggest team selection appeared to be related to a generally higher performance across the range of tests. Further, age was not a confounding variable as players selected tended to be younger than those non-selected. These findings reflect the general consensus that, in state-based junior competition, there is evidence of promoting overall player development, selecting those who are generally able to fulfil a range of positions and selecting players on their potential.

Programmer friendly and efficient distributed shared memory integrated into a distributed operating system

Distributed Shared Memory (DSM) provides programmers with a shared memory environment in systems where memory is not physically shared. Clusters of Workstations (COWs), an often untapped source of computing power, are characterised by a very low cost/performance ratio. The combination of Clusters of Workstations (COWs) with DSM provides an environment in which the programmer can use the well known approaches and methods of programming for physically shared memory systems and parallel processing can be carried out to make full use of the computing power and cost advantages of the COW. The aim of this research is to synthesise and develop a distributed shared memory system as an integral part of an operating system in order to provide application programmers with a convenient environment in which the development and execution of parallel applications can be done easily and efficiently, and which does this in a transparent manner. Furthermore, in order to satisfy our challenging design requirements we want to demonstrate that the operating system into which the DSM system is integrated should be a distributed operating system. In this thesis a study into the synthesis of a DSM system within a microkernel and client-server based distributed operating system which uses both strict and weak consistency models, with a write-invalidate and write-update based approach for consistency maintenance is reported. Furthermore a unique automatic initialisation system which allows the programmer to start the parallel execution of a group of processes with a single library call is reported. The number and location of these processes are determined by the operating system based on system load information. The DSM system proposed has a novel approach in that it provides programmers with a complete programming environment in which they are easily able to develop and run their code or indeed run existing shared memory code. A set of demanding DSM system design requirements are presented and the incentives for the placement of the DSM system with a distributed operating system and in particular in the memory management server have been reported. The new DSM system concentrated on an event-driven set of cooperating and distributed entities, and a detailed description of the events and reactions to these events that make up the operation of the DSM system is then presented. This is followed by a pseudocode form of the detailed design of the main modules and activities of the primitives used in the proposed DSM system. Quantitative results of performance tests and qualitative results showing the ease of programming and use of the RHODOS DSM system are reported. A study of five different application is given and the results of tests carried out on these applications together with a discussion of the results are given. A discussion of how RHODOS’ DSM allows programmers to write shared memory code in an easy to use and familiar environment and a comparative evaluation of RHODOS DSM with other DSM systems is presented. In particular, the ease of use and transparency of the DSM system have been demonstrated through the description of the ease with which a moderately inexperienced undergraduate programmer was able to convert, write and run applications for the testing of the DSM system. Furthermore, the description of the tests performed using physically shared memory shows that the latter is indistinguishable from distributed shared memory; this is further evidence that the DSM system is fully transparent. This study clearly demonstrates that the aim of the research has been achieved; it is possible to develop a programmer friendly and efficient DSM system fully integrated within a distributed operating system. It is clear from this research that client-server and microkernel based distributed operating system integrated DSM makes shared memory operations transparent and almost completely removes the involvement of the programmer beyond classical activities needed to deal with shared memory. The conclusion can be drawn that DSM, when implemented within a client-server and microkernel based distributed operating system, is one of the most encouraging approaches to parallel processing since it guarantees performance improvements with minimal programmer involvement.

Development of a contact probe incorporating a bragg grating strain sensor for nano coordinate measuring machines

This paper presents a novel optical fibre based micro contact probe system with high sensitivity and repeatability. In this optical fibre probe with a fused spherical tip, a fibre Bragg grating has been utilized as a strain sensor in the probe stem. When the probe tip contacts the surface of the part, a strain will be induced along the probe stem and will produce a Bragg wavelength shift. The contact signal can be issued once the wavelength shift signal is produced and demodulated. With the fibre grating sensor element integrated into the probe directly, the probe system shows a high sensitivity. In this work, the strain distributions along the probe stem with the probe under axial and lateral load are analysed. A simulation of the strain distribution was performed using the finite element package ANSYS 11. Performance tests using a piezoelectric transducer stage with a displacement resolution of 1.5 nm yielded a measurement resolution of 60 nm under axial loading.

Polymer electrolytes for electrochromic window applications

Polymer electrolytes suitable for use in electrochromic window devices for architectural applications have been developed. The electrolyte properties required for a large area, long lifetime, long cycle life and wide temperature range application such as this place some restrictions on the type of polymer system required. The electrolytes developed in this work are based on LiClO₄ in a polyether copolymer which is cured in place to produce a clear elastomer. The material properties and conductivity of electrolytes with and without the plasticizers are presented. Electrochromic device performance tests show that the electrolyte impedance is a factor in the device performance, but not the limiting factor.

Muscle redox signalling pathways in exercise. Role of antioxidants

Recent research highlights the importance of redox signalling pathway activation by contraction-induced reactive oxygen species (ROS) and nitric oxide (NO) in normal exercise-related cellular and molecular adaptations in skeletal muscle. In this review, we discuss some potentially important redox signalling pathways in skeletal muscle that are involved in acute and chronic responses to contraction and exercise. Specifically, we discuss redox signalling implicated in skeletal muscle contraction force, mitochondrial biogenesis and antioxidant enzyme induction, glucose uptake and muscle hypertrophy. Furthermore, we review evidence investigating the impact of major exogenous antioxidants on these acute and chronic responses to exercise. Redox signalling pathways involved in adaptive responses in skeletal muscle to exercise are not clearly elucidated at present, and further research is required to better define important signalling pathways involved. Evidence of beneficial or detrimental effects of specific antioxidant compounds on exercise adaptations in muscle is similarly limited, particularly in human subjects. Future research is required to not only investigate effects of specific antioxidant compounds on skeletal muscle exercise adaptations, but also to better establish mechanisms of action of specific antioxidants in vivo. Although we feel it remains somewhat premature to make clear recommendations in relation to application of specific antioxidant compounds in different exercise settings, a bulk of evidence suggests that N-acetylcysteine (NAC) is ergogenic through its effects on maintenance of muscle force production during sustained fatiguing events. Nevertheless, a current lack of evidence from studies using performance tests representative of athletic competition and a potential for adverse effects with high doses (>70 mg/kg body mass) warrants caution in its use for performance enhancement. In addition, evidence implicates high dose vitamin C (1 g/day) and E (≥260 IU/day) supplementation in impairments to some skeletal muscle cellular adaptations to chronic exercise training. Thus, determining the utility of antioxidant supplementation in athletes likely requires a consideration of training and competition periodization cycles of athletes in addition to type, dose and duration of antioxidant supplementation.

Predicting physiological capacity of human load carriage - a review

This review article aims to evaluate a proposed maximum acceptable work duration model for load carriage tasks. It is contended that this concept has particular relevance to physically demanding occupations such as military and firefighting. Personnel in these occupations are often required to perform very physically demanding tasks, over varying time periods, often involving load carriage. Previous research has investigated concepts related to physiological workload limits in occupational settings (e.g. industrial). Evidence suggests however, that existing (unloaded) workload guidelines are not appropriate for load carriage tasks. The utility of this model warrants further work to enable prediction of load carriage durations across a range of functional workloads for physically demanding occupations. If the maximum duration for which personnel can physiologically sustain a load carriage task could be accurately predicted, commanders and supervisors could better plan for and manage tasks to ensure operational imperatives were met whilst minimising health risks for their workers.

Reliability of performance in repeated sprint cycling tests

We have estimated the reliability of performance in a commonly employed exercise test consisting of repeated sprints on a cycle ergometer. Eight recreationally active young men completed a practice trial and three more trials at 3- to 6-day intervals. Each trial consisted of two bouts of 30-s maximal-effort cycling on an electromagnetically braked cycle ergometer; the bouts were separated by 4 min of rest. The typical (standard) errors of measurement for peak and mean power between trials 2 to 4 were 2.5 and 1.7% respectively for the first bout and 1.9 and 1.8% for the second bout. These errors are substantially less than those in previous reliability studies of single 30-s sprint tests, probably because of differences in quality of ergometer. The typical errors for the difference between bouts (i.e., fatigue) for peak power and mean power were 3.0 and 2.5%, respectively. Typical errors for the average of the two bouts were 1.6 and 1.2% for peak and mean power respectively, which are small enough to give adequate precision for moderate treatment effects in studies with modest sample sizes.

The reliability of performance of healthy adults on three visual perception tests

Problems with visual perceptual skills have been shown to have a negative impact on the daily living skills of individuals and are, therefore, commonly assessed by occupational therapists. The purpose of this study was to examine two types of reliability (internal consistency and test-retest reliability) of three newly revised or developed adult visual perception tests. The participants were 50 healthy adults, aged 18 to 55 years, from Melbourne, Victoria, Australia. The participants completed the Developmental Test of Visual Perception - Adolescent and Adult (DTVP-A), the Motor-Free Visual Perception Test - Third Edition (MVPT-3) and the Test of Visual Perceptual Skills (non-motor) - Third Edition (TVPS-3). Internal consistency was examined using Cronbach's alpha calculations and test-retest reliability was analysed using Spearman rho non-parametric correlation coefficients.

The results indicated that the DTVP-A, the MVPT-3 and the TVPS-3 had total scale internal consistency correlation scores of 0.60 or higher (0.60, 0.69 and 0.63 respectively). The majority of the subscales of each test had lower correlation coefficients than the overall scores (ranging from 0.22 to 0.49). For the DTVP-A, MVPT-3 and TVPS-3 total scale scores, the test-retest reliability correlation coefficients were statistically significant (rho = 0.46, p<0.05; rho = 0.62, p<0.01; and rho = 0.59, p<0.01, respectively). Overall, the three visual perceptual tests exhibited low to moderate levels of internal consistency and test-retest reliability.

Two tests of approach-iron golf skill and their ability to predict tournament performance

The aim of this study was to investigate the convergent and predictive validity of two skill tests that examine the ability of golfers to hit accurate approach-iron shots. Twenty-four high-level golfers (handicap = 2.6 ± 1.7) performed the Nine-Ball Skills Test (assesses the ability to shape/control ball trajectory with high accuracy) and the Approach-Iron Skill Test (assesses the ability to hit straight shots from varying distances with high accuracy). Participants then completed at least eight rounds of tournament golf over the following 90 days and reported an indicator of approach-iron accuracy (per cent error index). A moderate correlation (r = 0.50, P < 0.05) was noted between scores for both tests. Generalised estimating equations, using two covariates (lie of the ball and distance to hole), were used to determine model fit and the amount of variance explained for tournament per cent error index. Results showed that the Approach-Iron Skill Test was the slightly stronger predictor of on-course per cent error index. With both test scores considered together, a minimal amount of additional variance was explained. These findings suggest that either of the tests used individually or combined may be used to predict tournament approach iron performance in high-level golfers.

The influence of pacing during 6-minute supra-maximal cycle ergometer performance

The aim of this study was to evaluate the influence of pacing on performance, oxygen uptake (V̇O₂), oxygen deficit and blood lactate accumulation during a 6-minute cycle ergometer test. Six recreational cyclists completed three 6-minute cycling tests using fast-start, even-pacing and slow-fast pacing conditions. Cycle ergometer performance was measured as the mean power output produced for each cycling test. Energy system contribution during each cycling trial was estimated using a modified accumulated oxygen deficit (AOD) method. Blood lactate concentration was analysed from blood sampled using a catheter in a forearm vein prior to exercise, at 2 minutes, 4 minutes and 6 minutes during exercise, and at 2 minutes, 5 minutes and 10 minutes post-exercise. There was no significant difference between the pacing conditions for mean power output (P=0.09), peak V̇O₂ (P=0.92), total V̇O₂ (P=0.76), AOD (P=0.91), the time-course of V̇O₂ (P=0.22) or blood lactate accumulation (P=0.07). There was, however, a significant difference between the three pacing conditions in the oxygen deficit measured over time (P=0.02). These changes in the time-course of oxygen deficit during cycling trials did not, however, significantly affect the mean power output produced by each pacing condition.

Improving on- and off-campus student performance in structural mechanics

This paper investigates the performance of 329 (173 on- and 186  off-campus) students enrolled in two structural mechanics units at Deakin University, a leader in engineering distance-education in Australia. The two units experience unacceptably high rates of failure. An analysis of the assignment, laboratory and examination marks is presented. Consideration is also given to the total marks. The results show that on-campus students perform better in structural mechanics than their off-campus counterparts. Plots of the student performance distributions for the three assessment methods are provided (for each unit) and high failure rates are linked to low examination marks. Students tend to perform best in assignments and worst in examinations. Parametric statistical tests show a correlation between the continuous assessment and examination marks. To motivate students to fully participate in continuous assessment tasks the authors therefore propose several changes to the assessment criteria and marking schemes.

Delivery and assessment strategies to improve on- and off-campus student performance in structural mechanics

This paper considers the delivery and assessment strategies used in two structural mechanics units at Deakin University, a leader in distance education in Australia. The two units have had unacceptably high rates of student failure. Student perceptions of the delivery method were analysed and an investigation was carried out of the performance of 329 (173 on- and 156 off-campus) students enrolled in the two units. An analysis of the assignment, laboratory and examination marks is presented. Consideration is also given to the total marks. The results show that on-campus students performed better in structural mechanics than their off-campus counterparts. Plots of the distributions of student performance for the three assessment methods are provided (for each unit) and high failure rates are linked to low examination marks. Students tended to perform best in assignments and worst in examinations. Parametric statistical tests show a correlation between the marks obtained in continuous assessment and in examinations, and it is therefore proposed that, in order to improve performance, the students must be encouraged to participate fully in all aspects of the course. Many students were unenthusiastic about laboratory practical sessions and did not think they aided their understanding of the theoretical material. Motivation to participate is often dependent on the perceived relevance of a given task and its contribution to the total mark and, thus, to help motivate students to participate fully in the continuous assessment tasks, the authors propose several changes to the delivery methods, as well as to assessment criteria and marking schemes.