64 resultados para performance characteristics

em Deakin Research Online - Australia


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The current literature recommends dynamic rather than static stretching for the athletic warm-up. Dynamic stretching and various conditioning stimuli are used to induce potentiation in subsequent athletic performance. However, it is unknown as to which type of activity in conjunction with dynamic stretching within a warm-up provides the optimal potentiation of vertical jump performance. It was the objective of the study to examine the possible potentiating effect of various types of conditioning stimuli with dynamic stretching. Twenty athletes participated in 6 protocols. All the experimental protocols included 10 minutes of dynamic stretching. After the dynamic stretching, the subjects performed a (a) concentric (DS/CON): 3 sets of 3 repetition maximum deadlift exercise; (b) isometric (DS/ISOM): 3 sets of 3-second maximum voluntary contraction back squats; (c) plyometric (DS/PLYO): 3 sets of 3 tuck jumps; (d) eccentric (DS/ECC): 3 modified drop jumps; (e) dynamic stretching only (DS), and (f) control protocol (CON). Before the intervention and at recovery periods of 15 seconds, 4, 8, 12, 16, and 20 minutes, the participants performed 1-2 maximal countermovement jumps. The DS and DS/CON protocols generally had a 95-99% likelihood of exceeding the smallest worthwhile change for vertical jump height, peak power, velocity and force. However, the addition of the deadlift to the DS did not augment the potentiating effect. Time-to-peak potentiation was variable between individuals but was most consistent between 3 and 5 minutes. Thus, the volume and the intensity associated with 10 minutes of dynamic stretching were sufficient to provide the potentiation of vertical jump characteristics. Additional conditioning activities may promote fatigue processes, which do not permit further potentiation.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Students completing three-year engineering technology and four-year professional engineering undergraduate courses may undertake a number of common study units. To gain an objective understanding of the academic performance characteristics of both student groups in the engineering and technology programs at Deakin University (Australia), a study was  undertaken of close to 9000 unit enrollments. It was found that: overall the BTech withdrawal rate was about 20% higher than for BE students; the rate of withdrawal was significantly different between the two student groups; the grade distribution for completing students was not significantly different between the two groups; the mean final grade was not significantly different between the two student groups; the failure rate was not significantly different between the two student groups; and the overall wastage rate (withdrawn rate plus fail rate) was significantly higher for BTech students. Other related results are also reported.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The engineering-technologist degree is an important element of continuing engineering education for many members of the engineering workforce. This paper reports on the study of close to 9000 unit enrolments to gain an objective understanding of the withdrawal, persistence, and academic-performance characteristics of both engineering-technologist and professional-engineering students.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Wetsuits are an integral part of surfing especially in the southern regions of Australia. There is currently little information about mechanical, comfort and thermal properties of wetsuits. There is a demand from wetsuit manufacturers to better understand the neoprene properties and wetsuit performance. The performance characteristics of eight topselling wetsuits, from both high end and low end of the market, were examined. These characteristics include thickness, elasticity, bursting strength, hydrophobicity, thermal conductivity and seal strength. Tensile assessment revealed that neoprene foam was strong and its stretch recovery was well beyond 1.6 times of the original length. Neoprene was found to be hydrophobic with very low surface energy. High-end wetsuits with higher thickness showed slightly higher thermal resistance than low-end wetsuits, indicating that both thickness and bulk density of neoprene influenced thermal properties. High-end wetsuits with fluid seal were stronger than low-end wetsuits with stitched seal.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Little is known about the race performance characteristics of elite-level slalom canoeists or the magnitude of improvement necessary to enhance medal-winning prospects. Final placing in this sport is determined by the aggregate of semi-final and final run times inclusive of penalty times. We therefore used mixed linear modelling to analyse these times for finalists ranked in the top and bottom half in the men's canoe, men's kayak, and women's kayak boat classes at World Cups, World Championships, and Olympic Games from 2000 to 2007. The run-to-run variability for top-ranked athletes at different courses ranged from 0.8% to 3.2% (90% confidence limits ×/÷1.11-1.31), reflecting differences in how challenging these courses were. The race-to-race variability of aggregate run time was 1.2-2.1% (×/÷~1.09); 0.3 of this variability yields the smallest worthwhile enhancement of 0.4-0.6%. The variabilities of bottom-ranked finalists were approximately double those of top-ranked finalists. The home advantage was small (0.3-0.8%), and incurring a penalty had a marginal effect on reducing actual run time (0.2-0.7%). Correlation coefficients for performance predictability within competitions (0.06-0.35), within years (0.12-0.47), and between years (0.12-0.43) were poor. In conclusion, the variability of performance and smallest worthwhile enhancements in slalom canoe-kayaking are larger than those of comparable sports, and race outcomes are largely unpredictable.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Introduction:
Low dose spiral computed tomography (CT) is a sensitive screening tool for lung cancer that is currently being evaluated in both non-randomised studies and randomised controlled trials.
Methods:
We conducted a quantitative decision analysis using a Markov model to determine whether, in the Australian setting, offering spiral CT screening for lung cancer to high risk individuals would be cost-effective compared with current practice. This exploratory analysis was undertaken predominantly from the perspective of the government as third-party funder. In the base-case analysis, the costs and health outcomes (life-years saved and quality-adjusted life years) were calculated in a hypothetical cohort of 10,000 male current smokers for two alternatives: (1) screen for lung cancer with annual CT for 5 years starting at age 60 year and treat those diagnosed with cancer or (2) no screening and treat only those who present with symptomatic cancer.
Results:
For male smokers aged 60–64 years, with an annual incidence of lung cancer of 552 per 100,000, the incremental cost-effectiveness ratio was $57,325 per life-year saved and $105,090 per QALY saved. For females aged 60–64 years with the same annual incidence of lung cancer, the cost-effectiveness ratio was $51,001 per life-year saved and $88,583 per QALY saved. The model was used to examine the relationship between efficacy in terms of the expected reduction in lung cancer mortality at 7 years and cost-effectiveness. In the base-case analysis lung cancer mortality was reduced by 27% and all cause mortality by 2.1%. Changes in the estimated proportion of stage I cancers detected by screening had the greatest impact on the efficacy of the intervention and the cost-effectiveness. The results were also sensitive to assumptions about the test performance characteristics of CT scanning, the proportion of lung cancer cases overdiagnosed by screening, intervention rates for benign disease, the discount rate, the cost of CT, the quality of life in individuals with early stage screen-detected cancer and disutility associated with false positive diagnoses. Given current knowledge and practice, even under favourable assumptions, reductions in lung cancer mortality of less than 20% are unlikely to be cost-effective, using a value of $50,000 per life-year saved as the threshold to define a “cost-effective” intervention.
Conclusion:
The most feasible scenario under which CT screening for lung cancer could be cost-effective would be if very high-risk individuals are targeted and screening is either highly effective or CT screening costs fall substantially.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

We describe the design of a directory-based shared memory architecture on a hierarchical network of hypercubes. The distributed directory scheme comprises two separate hierarchical networks for handling cache requests and transfers. Further, the scheme assumes a single address space and each processing element views the entire network as contiguous memory space. The size of individual directories stored at each node of the network remains constant throughout the network. Although the size of the directory increases with the network size, the architecture is scalable. The results of the analytical studies demonstrate superior performance characteristics of our scheme compared with those of other schemes.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Given the escalating drought conditions in Australia, synthetic surfaces have recently been explored as a viable surface option for community-level Australian football–cricket ovals. The vast majority of Australian football ovals are transformed into cricket pitches during the football off-season and hence the characteristics of both sports had to be duly considered in the development of standards that could be tested in a laboratory setting, for a synthetic turf surface. This paper describes the data collection and test methods undertaken in the development of the standards for synthetic surface use in Australian football and cricket. The paper also discusses the issues and challenges encountered during the development of standards for multi-sport synthetic surfaces to ensure player safety while maintaining the performance characteristics of both sports. Surface property and ball interaction tests were undertaken on natural playing surfaces, both in situ and in the laboratory to determine the properties of the current playing surface for each sport. This paper highlights the importance of careful consideration of the characteristics of both games and the use of equipment from both sports in the testing methods. The standards described in this paper have now been accepted by the Australian Football League and Cricket Australia and the product approval process and use of synthetic surfaces for Australian football and cricket is imminent.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

As an important productivity indicator, the change of labour productivity is one indispensable marker in determining the rise or fall of overall industrial performance. This study aims to address whether the labour productivity level of the Australian construction industry has, in fact, shown a huge improvement during the last few decades. This article constructs a measuring method estimating labour productivity changes based on the data envelopment analysis technique with variable returns to scale. By adopting a production frontier approach, the labour productivity index can be broken down into components attributable to efficiency change, technological progress and capital accumulation. The numerical results exemplified by a single-input and single-output system indicate that the average annual labour productivity levels of the construction industry are slowly growing in all the Australian states and territories. However, the year-on-year change in the overall labour productivity performance does not maintain a long-term increase over the period 1990–2008. The study forms the basis for further industrial productivity research. Proposals and recommendations are expected to be beneficial for making policy and strategic decisions to improve the performance of the construction industry.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Purpose : To determine the interobserver agreement and diagnostic performance characteristics of computed tomography (CT) for determining union of scaphoid waist fractures.

Methods : A total of 59 orthopedic and trauma surgeons rated for union a set of 30 sagittal CT scans of 30 scaphoid waist fractures. Of these fractures, 20 were treated nonoperatively, were imaged between 6 and 10 weeks after injury, and were known to have eventually achieved union. Ten were operatively confirmed to be ununited. We rated each scan as united or ununited using a Web-based rating application. We assessed interobserver reliability using Siegel's multirater Kappa. We calculated diagnostic performance characteristics using Bayesian formulas.

Results : The interobserver agreement among 59 raters was substantial. The average sensitivity, specificity, and accuracy of diagnosing union of scaphoid waist fractures on sagittal CT scans were 78%, 96%, and 84%, respectively. Assuming a 90% prevalence of fracture union of the scaphoid, the positive predictive value of a diagnosis of union on sagittal CT scan was 0.99 and the negative predictive value was 0.41.

Conclusions : Our results suggest that CT scans are accurate and reliable for diagnosis of union but inadequate for ruling out nonunion of scaphoid waist fractures between 6 and 10 weeks after injury.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Heat-reflective layered apparel or footwear constructed from various combinations of layers of materials having selected thermal and moisture transfer properties to provide improved performance characteristics. Within these various combinations, the addition of a very thin heat reflective layer, made with a metallic material such as aluminum, applied using a vacuum plasma vapor deposition method, provides a coating that will reflect infra red heat energy either back to the body or away from the body. This heat reflective coating is so thin that is does not adversely alter the original suppporting fabrics hand feel, drape,weight , strectch or breathability. Various layers manage the body heat of an individual by reflection or thermal retention while also providing moisture wicking and antimicrobial function. Other layers manage thermal isolation from the external temperatures by using materials with very low thermal conductivity in combination with waterproof layers that can also be breathable.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In contrast to most scientific disciplines, sports science research has been characterized by comparatively little effort investment in the development of relevant phenomenologi-cal models. Scarcer yet is the application of said models in practice. We present a framework which allows resistance training practitioners to employ a recently proposed neu-romuscular model in actual training program design. The first novelty concerns the monitoring aspect of coaching. A method for extracting training performance characteristics from loosely constrained video sequences, effortlessly and with minimal human input, using computer vision is described. The extracted data is subsequently used to fit the underlying neuromuscular model. This is achieved by solving an inverse dynamics problem corresponding to a particular exercise. Lastly, a computer simulation of hypothetical training bouts, using athlete-specific capability parameters, is used to predict the effected adaptation and changes in performance. The software described here allows the practitioner to manipulate hypothetical training parameters and immediately see their effect on predicted adaptation for a specific athlete. Thus, this work presents a holistic view of the monitoring-assessment-adjustment loop.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Titanium alloy Ti-6Al-4V is the most commonly used titanium alloy in the aerospace and biomedical industries due to its superior material properties. An experimental investigation has been carried out to evaluate the machinability of high performance aerospace alloys (Ti-6Al-4V) to determine their in service performance characteristics based on different machining strategies. Nearly 80-90% of the titanium used in airframes is Ti-6Al-4V. The experimental design consist of face milling Ti-6Al-4V at 12 different combinations of cutting parameters consisting of Depth Of Cut (DoC)- 1, 2 and 3 mm; speeds- 60 and 100 m/min; coolant on/off and at constant feed rate of 0.04mm/tooth. Post machining analysis consists of cutting force measurement, surface texture analysis and metallographic analysis. The future work consists of in-depth investigation into the phase transformational reactions during machining.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The charging of an undivided cerium–zinc redox battery by various current waveforms some of which mimic the output of renewable energy (solar, wind, tidal, biofuel burning) to electricity transducers is considered in this work, where the battery operates through diffusion-only conditions, and is discharged galvanostatically. Under reasonable assumption, the mathematical model developed enables the observation that the performance characteristic of the cells charged with a constant power input differentiates between the various current–charge waveforms, with cell geometry and electrode kinetics playing subtle, but significant, roles; in particular, high efficiency is observed for sunlight-charged batteries which are thin and suffer no corrosion of the sacrificial electrode, and which have already experienced a charge–discharge cycle. The performance characteristics of the systems are interpreted in the light of consequences for smart grid realisation, and indicate that, for a constant power input, the most matched renewable is biofuel burning with a current output that linearly increases with time.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Effective oil/water separation and removal of organic molecules from water are of worldwide importance for water source protection. Multifunctional sorbent materials with excellent sorption capacity, stability, and recyclability properties need to be developed. Here, flexible and multifunctional polymer/porous boron nitride nanosheets (BNNSs) membranes with high water permeability, exhibiting high effectiveness and stability in the purification of simulated wastewater tainted with either oil/water emulsion or organic molecules, are reported. Remarkably, the flexible nature of these porous membranes enables simplicity of operation for water remediation processing and ease of post-processing collection. The composite membrane also displays a remarkably high permeability of 8 × 104 L μm m-2 h-1 bar-1, roughly three orders of magnitude higher than pure polymer, and excellent filter efficiencies for the pharmaceuticals ciprofloxacin, chlortetracycline, and carbamazepine (up to 14.2 L g-1 of BNNSs in the composite membrane for a concentration of 10 mg L-1 ciprofloxacin) and the dye methylene blue (up to 9.3 L g-1 of BNNSs in the composite membrane at a concentration of 30 mg L-1). Exhausted membranes can be readily rejuvenated by simple washing with retention of their high-performance characteristics. The results demonstrate the potential efficacy and practicality of these membranes for water cleaning.