Frontispiece: GaN and Gax In1-x N nanoparticles with tunable indium content: synthesis and characterization

Optoelectronic Devices A captivating peculiarity of GaInN alloys is a tunable band gap, depending on the Ga/In ratio, where the pure nitrides are bright yellow (GaN) or dark blue (InN). Gax In1-x N nanoparticles were prepared by a bottom-up approach (the urea glass route). The incorporation of an increasing amount of indium in the GaN structure is indicated by different colors (i.e., different band gaps), and the alloys are further investigated by TEM and optical microscopy. More information can be found in the Full Paper by C. Giordano et al. on page 18976 ff.

Microstructure characteristics of the (111) oriented grains in a Fe-30Ni-Nb model austenitic steel deformed in hot uniaxial compression

The work presents a detailed investigation of the microstructure characteristics of the (111) oriented grains in a Fe-30Ni-Nb austenitic model steel subjected to hot uniaxial compression at 925 °C at a strain rate of 1 s- 1. The above grains exhibited a tendency to split into deformation bands having alternating orientations and largely separated by transition regions comprising arrays of closely spaced, extended sub-boundaries collectively accommodating large misorientations across very small distances. On a fine scale, the (111) oriented grains typically contained a mix of "microbands" (MBs) closely aligned with {111} slip planes and those significantly deviated from these planes. The above deformation substructure thus markedly differed from the microstructure type, comprising strictly non-{111} aligned MBs, expected within such grains on the basis of the uniaxial compression experiments performed using aluminium. Both the crystallographic MBs and their non-crystallographic counterparts typically displayed similar misorientations and formed self-screening arrays characterized by systematically alternating misorientations. The crystallographic MBs were exclusively aligned with {111} slip planes containing slip systems whose sum of Schmid factors was the largest among the four available slip planes. The corresponding boundaries appeared to mainly display either a large twist or a large tilt component.