De Chirico and Walker in light of Nietzsche and Guattari: the enigma of partial bodies in illogical spaces

If one concedes that the Freudian unconscious is inseparable from a society attached to its past, for example, its phallocentric traditions, Guattari’s alternative model dealing with "the production of subjectivity" offers a new perspective (1995: 11). From this vantage point, it is possible to map the way "every individual and social group" models the creation of subjectivity, a subjectivity "composed of cognitive references as well as mythical, ritual and symptomatological references" (1995: 11).

Application of a discrete event simulation for robust system design of a melt facility

This paper presents a methodology to identify robust operating regions through the selection of controllable factory variables, using discrete event simulation. A casting plant melt facility was used as an industrial test bed to develop these techniques. A robust system design was determined by response surface analysis of key production parameters. Furthermore, robust operating policies that maximise throughput, while minimizing work-in-progress and thus energy consumption were identified.

Partial-state observers for nonlinear systems

This note deals with the design of reduced-order observers for a class of nonlinear systems. The order reduction of the observer is achieved by only estimating a required partial set of the state vector. Necessary and sufficient conditions are derived for the existence of reduced-order observers. An observer design procedure based on linear matrix inequalities is given. A numerical example is given to illustrate the design method.

Seeding of single crystal superalloys--Role of seed melt-back on casting defects

Single crystal seeds of the nickel-base superalloy CMSX-4 have been partially melted in a temperature gradient and then quenched. Small islands of random orientation are observed throughout the melted-back semi-solid. These random orientations appear to be pinched-off secondary dendrite arms, but there is no evidence that they are transported ahead of the dendrite tips to nucleate stray grains during directional solidification.

Crossing the border : comparing partial and fully online learning

In many countries across the world, online learning is playing an ever-increasing role in higher education. However, there seem to be starkly contrasting analyses of the educational value of online learning. In this paper, I reflect on my own online learning experiences in the UK and Australia and conclude that there are significant differences between partial and fully online course units. I also develop general criticisms of online learning system design and suggest a number of fundamental design and performance objectives for the design of online learning systems.

Similarity solutions of partial differential equations using DESOLV

We present and describe new reduction routines included in DESOLV which, in many cases, may allow the complete automation of the determination of similarity solutions of partial differential equations.

Feasibility study of partial recrystallisation in multi-pass hot deformation process and application to calculation of mean flow stress

A feasibility study for handling the partial recrystallisation in multi-pass hot deformation where the heterogeneity of microstructure of deformed austenite is inherently accompanied is presented. The proposed model is based on modification of the conventional model in which the microstructure of deformed austenite at each pass is simply taken as being homogeneous during the multi-pass deformation. The usefulness of the modified model has been demonstrated by applying it to a four-pass oval–round (or round–oval) rod rolling sequence. The recrystallised fraction, austenite grain size (AGS) and mean flow stress at each pass computed from the modified model has been compared with those from the conventional model. The result showed that the recrystallisation behaviour and evolution of AGS at a given pass were dependent on the modelling method of the partial recrystallisation in the multi-pass rolling for the case studied. As the rolling speed increased, the difference between the mean flow stresses calculated by the conventional model and the proposed model was gradually larger in accordance with the contribution of partial recrystallisation.

Two stage partial classification for inconsistent and imbalanced classes

When deriving classification rules for a non-symmetric database with a binary target class, it is common practice to generate rules for the majority class, then any object which is not covered by a rule of suitable accuracy is by default given the minority class prediction. However, in the case where misclassification costs for the minority class significantly outweigh those of the majority class, this may mean that there are still costly incorrect predictions. We examine the capability of an evolutionary algorithm to detect these potentially costly misclassifications.

High technology nanocomposite fibres: Development of melt spun semi-aromatic polyamide nanocomposite fibres

Novel polyamide nanocomposite fibres have been produced by compounding semi aromatic Poly (m-xylene adipamide) (MXD6) and organophilic Montmorillonite (MMT). Partially orientated fibres (POF) of MXD6 nanocomposite were obtained by melt spinning on a multifilament fibre extrusion system at three different speeds. The effect of the drawing velocity
on the mechanical properties of the filaments has been determined. Tensile measurements indicated that the introduction of the nanoparticies by melt intercalation improves the tenacity and toughness of the resulting polyamide fibres. The microstructure of the nanocomposites was examined by X-ray diffraction and Transmission Electron Microscope (TEM) and shown to
be an exfoliated disordered structure. The thermal stability of MXD6 nanocomposites was analysed by thermo gravimetric analysis (TGA) suggesting stabilisation of the clay and the polymer systems above 450°C.

Socially optimal criminal court waiting times : a partial investigation

Criminal courts provide a forum for conducting prosecutions with a guilty plea or a trial. Since queues are used as the basis for rationing scarce court facilities delays are inevitable, however courts are invariably criticised as being inefficient as a consequence. This focus on court delay defined as the time elapsing between the listing of the case in the court list and its final disposition is misleading. Rather, attention should be drawn to the considerably longer period between the initiation of proceedings and the conclusion of the case. In the case of defendants not granted bail, this pre-trial delay confers both costs and benefits on society and this observation can be used to ascertain socially optimal pre-trial waits.

Partial purification and characterization of limonoate dehydrogenase from Rhodococcus fascians for the degradation of limonin

An extracellular limonoate dehydrogenase was purified 10-fold from a cell-free extract of Rhodococcus fascians by ammonium sulfate precipitation, dialysis, and ultrafiltration. This purified dehydrogenase catalyzed the
conversion of limonoate to 17-dehydrolimonoate. The enzyme showed optimum activity at pH 8.0 and 40oC, with K_m value of 0.9 µM, and requires Zn ions and sulfhydryl groups for catalytic action. The enzyme activity was inhibited by Hg²⁺ and NaN₃ ions. The degradation of limonin (66%) in Kinnow mandarin juice was successfully demonstrated with partially
purified limonoate dehydrogenase. With scale-up preparation of limonoate dehydrogenase, a successful debittering operation of fruit juices appears feasible.

Partial purification and characterization of exoinulinase from kluyveromyces marxianus YS-1 for preparation of high-fructose syrup

An extracellular exoinulinase( ^{2, 1}- ß- D fructan fructanohydrolase, EC 3.2.1.7), which catalyzes the hydrolysis of inulin into fructose and glucose, was purified 23.5-fold by ethanol precipitation, followed by Sephadex G-100 gel permeation from a cell-free extract of Kluyveromyces marxianus YS-1. The partially purified enzyme exhibited considerable activity between pH 5 to 6, with an optimum pH of 5.5, while it remained stable(100%) for 3 h at the optimum temperature of 50º c. Mn²⁺ and Ca²⁺ produced a 2A-fold and 1.2-fold enhancement in enzyme activity, whereas Hg²⁺ and Ag²⁺  completely inhibited the inulinase. A preparation of the partially purified enzyme effectively hydrolyzed inulin, sucrose, and raffinose, yet no activity was found with starch, lactose, and maltose. The enzyme preparation was then successfully used to hydrolyze pure inulin and raw inulin from Asparagus racemosus for the preparation of a high-fructose syrup. In a batch system, the exoinulinase hydrolyzed 84.8% of the pure inulin and 86.7% of the raw Asparagus racemosus inulin, where fructose represented 43.6mg/ml and 41.3mg/ml, respectively.

Should partial least squares be used for analysing psychological constructs?

This paper critically examines an analytical tool - partial least squares regression, or P LS - that is increasingly being used in the academic business literature to validate measures of psychological constructs, and to test hypotheses based on these. The paper provides a contextual and historical review of the resurgence of P LS, and explores several of the claims made by its developers and supporters when it was first promoted in the 1980s, and, more recently, when it reappeared in the information systems literature. Many claims appear plausible but rest on non-mainstream uses of terms and concepts taken from the psychometric field. The paper also canvasses why P LS is a poor analytical tool for research that involves psychological constructs.