Microbial quality of commercial inoculants to increase BNF and nutrient use efficiency

Commercial agricultural products are increasingly being produced and sold in the market worldwide and are claimed to have a major impact on increasing crop productivity. The main objective of this research was to characterize and assess the microbial content of inoculants obtained from different countries in order to verify whether they fulfill the claims of the manufacturers. The proliferation of the underperforming products can thereafter be prevented, and value can be added to effective products. The microorganisms contained in the commercial inoculants were isolated, purified, and identified by partial sequencing of the 16S rDNA. Results showed that the majority (about 64%) of the products contained one or several strains of contaminants and only 37% of the products could be considered as “pure.” Forty percent of the tested products did not contain any of the claimed strains but only contaminants. Rhizobial products were generally of better quality than the other PGPR-based products. Results highlight the need for better quality control systems, to ensure efficacious products reach the end users.

Preformed and sprayable polymeric mulch film to improve agricultural water use efficiency

Plastic mulch films are widely used in agriculture to enhance crop production by suppressing weeds, conserving soil water and increasing soil temperature. The majority of plastic mulch films are however not biodegradable and are typically removed after each growing season. Recovery of these plastics from the soil is difficult and can affect successive crop yields while causing substantive cost to the environment and farmers. Due to increasingly stringent regulations regarding use of non-degradable plastic in agriculture they are likely to be phased out in the near future. In the past 10 years several classes of 'biodegradable' materials have been studied but most of these films are reported to be relatively weak in mechanical properties, not efficiently degradable and cost prohibitive.More recently, researchers have turned their attention to sprayable biodegradable polymer coatings for use on soils due to their easy application and versatility. The ability to mix natural additives, plasticizers and fillers to control and improve the mechanical and biodegradation properties of the core polymeric mulch film has been the driving force behind the development of these next generation sprayable polymeric mulch films.There have been many excellent review articles and papers written about polymeric mulch film, but the developing sprayable polymer systems have not been reviewed to the same extent. This paper focusses on the research progress in the area of biodegradable and sprayable polymer mulch film with emphasis on polymer formulations, properties and application. It also discusses current research to highlight the importance, potential benefits and future challenges in developing a cost effective biodegradable sprayable film for use in production agriculture.

Application of novel technologies in water reclamation, reuse and recycle

Water reuse has become an integral element of the "total water resources planning and management" along with the other elements such as water conservation, water use efficiency and management of the allocation of existing water sources. Researchers are working actively on the following aspects of water reuse: identification and characterization of different wastewaters that could be reclaimed, development of treatment technologies and effluent standards, quantification of potential gains due to recycling and risk management. The wastewaters that can be reclaimed are domestic and industrial wastewaters, grey water, black water, stormwater and rain water and their potential reuse lies in agriculture, aquaculture, industries, non-potable use in residential and community fronts and indirect and direct potable use. The treatment of wastewater ranges from secondary treatment to advanced treatment, which produces different "Classes" of reclaimed water. This paper evaluates the current status of the research on the above-mentioned important aspects of water reuse with relevant case studies and the future demand for reuse water. The direction in which the future-reuse schemes should be formulated so that they are safe, environmentally sustainable and cost effective are also discussed.

Urban growth in arid environments : developing water sustainability indicators for Abu Dhabi (UAE)

The United Arab Emirates (UAE) face a serious water problem. It has a very dry climate, high evaporation rate, combined with large water consumption from fast growing population, economic activities and uncontrolled uses of water for irrigation. Currently, UAE has one of the largest water footprints in the world. Groundwater is overexploited. Waste water is increasingly being treated to supply non-drinking water, but it still cover a small proportion of the demand. Desalination of sea water is the main source of potable water in UAE, but the high economic cost of desalination, its intensive energy demand and the adverse effects of its effluents on the marine life are a major concern. Other factors contributing to the problem are the focus of water management policies on keep supplying the growing demand for water, the increase of the per capita water consumption, and the free water charge for most of population. This research goal is to develop a water sustainability set of indicators for the challenging context of UAE. This paper presents the first stage of the research. Based on a review of the literature, the proposed framework involves 19 indicators, divided into four categories: water availability; water quality; water use efficiency; and policy and governance. Using an integrated cause-effect approach (DSR - Driving force, State, Response), the indicators were related in terms of their interdependencies, with a holistic view of the city water cycle. A preliminary test of the indicators to Abu Dhabi as a case study allowed an evaluation of the main 'Driving force' on the system, such as the scarcity of water due to natural constraints of the region, and increasing water consumption patterns of modern society; an assessment of the current 'state', which is under serious water stress. Also it indicated some potential 'responses', such as implementing policies for increasing efficient use.

The consequences of land use change on nutrient exports: a regional scale assessment in south-west Victoria, Australia

Estimation of nutrient load production based on multi-temporal remotely sensed land use data for the Glenelg–Hopkins region in south-west Victoria, Australia, is discussed. Changes in land use were mapped using archived Landsat data and computerised classification techniques. Land use change has been rapid in recent history with 16% of the region transformed in the last 22 years. Total nitrogen and phosphorus loads were estimated using an export coefficient model. The analysis demonstrates an increase in modelled nitrogen and phosphorus loadings from 1980 to 2002. Whilst such increases were suspected from past anecdotal and ad-hoc evidence, our modelling estimated the magnitude of such increases and thus demonstrated the enormous potential of using remote sensing and GIS for monitoring regional scale environmental processes.

CH2 energy harvesting systems : economic use and efficiency

This paper looks at the City of Melbourne's new office development CH₂ as a case study of world class energy performance. In particular, the integrated design of conventionally independent systems has led to the potential to deliver significant savings to the Council and to deliver better environmental conditions to building occupants that in turn may contribute to satisfaction, well-being and Productivity. It is concluded that this project has the potential
to be an iconic example of effective implementation of ESD (environmental sustainable design) principles and therefore act as a demonstration project to others. Energy efficiency of more than 50% of current benchmarks for Melbourne is effected. Energy harvesting is defined as arising from squander, waste and nature, which is a new concept introduced in this paper to better describe the design decision process.

Land use change and impacts on nutrient loads using GIS

Land use change and its impacts on nutrient loads were investigated for the Glenelg-Hopkins Catchment in south-west Victoria, Australia. The study involved a cross-disciplinary approach comprising of remote sensing, Geographical Information Systems, spatial and statistical modelling to identify relationships between land use and stream water quality over a large regional catchment of 27,000 square kilometers.

Water savings or water efficiency? Water-use attitudes and behaviour in rural and regional areas

Drought conditions in southwest Victoria, as in other regions of Australia and around the world, have caused the need to reduce water consumption to ensure security of supply into the future. To develop effective water-saving behaviour change strategies, an understanding of people's attitudes to the behaviour, including barriers stopping them from adopting the behaviour, is required. Thus, this paper explores the water-use behaviours and attitudes of rural and regional urban water users in southwest Victoria. A conceptual model of the factors impacting on water use of these users, including drivers and barriers to water saving, is developed. The factors that appear to impact on water-use behaviour not previously identified included the source of water supply (groundwater versus surface water), previous experience with water shortages and trust in the water authority and government. Also, a difference in the drivers for water saving was found, with farmers wanting to be 'water efficient' to keep their business viable and productive, while hobby farmers and residential users were 'saving water' for more altruistic reasons. These findings have implications for development of demand management strategies in this, and other, rural and regional areas. However, the conceptual model has to be tested to determine if it truly reflects factors influencing water-saving behaviour in rural and regional areas.

Rationale for the use of DC microgrids: feasibility, efficiency and protection analysis

Electrical power systems are undergoing highly significant changes in their structures. The emergence of renewable energy units in the power generation sector, the use of high-voltage DC in the power transmission sector, and the prevalence of islanded or integrated microgrids in the distribution sector are the strongest evidence supporting this claim. These changes are mostly the consequences of the increasing energy demand rate, climate change, and environmental challenges, as well as the high investment and maintenance cost of the previous structures. Considering these new conditions and according to the recent development in DC/DC conversion topologies and control techniques, different studies have been conducted on how and why DC microgrids outperform AC microgrids. This study discusses the feasibility of the DC microgrid system according to recent developments in power systems. The efficiency and power loss reduction in DC distribution systems are then analyzed, some of the common strategies and devices for protection systems in such networks are reviewed, and the possible and existing challenges in developing the DC microgrids are highlighted. The mathematical calculations and theories for this evaluation are presented to determine the reliable justification for selecting the appropriate microgrid systems.

A practical approach to monitoring nutrient supplement intake of Australian adults

The adoption, in mid-1995, of the revised food Standard A9, which permits the more liberal addition of nutrients to a range of food products, highlighted the need to obtain information on nutrient intake from supplements to complement the i 995 National Nutrition Survey data on nutrient intake from food. This paper describes the method used to obtain quantitative information on nutrient supplement intake and reports on the prevalence of supplement use in different subgroups of the Australian population. Information on supplement intake was obtained in two Australian Bureau of Statistics Population Survey Monitor surveys in August 1995 and February 1996 using the Therapeutic Goods Administration (TGA) registration numbers to identify individual products. Approximately 18% of men and 29% of women aged 18 years and over reported consuming a nutrient supplement on the day before the survey and these proportions increased to 25% and 35% respectively for consumption during the two weeks before the survey. The prevalence of supplement intake increased with age, education level, socioeconomic status, employment status and with fruit and vegetable intake. The substantial proportion of Australian adults who consume nutrient supplements, and the rapidly changing composition of the Australian food supply in response to changes in food regulation, indicate that there is a need for regular monitoring of nutrient intake from supplements. The use of TGA registration numbers to identify supplements provides a practical way to address this need.

Risk analysis in cost planning and its effect on efficiency in capital cost budgeting

Builds on earlier work which reported on the experience of the Hong Kong Government in using risk analysis techniques in capital cost estimating. In 1993 the Hong Kong Government implemented a methodology for capital cost estimating using risk analysis (ERA) in its public works planning. This calculated amount replaces the pre-1993 contingency allowance, which was merely a percentage addition on top of the base estimate of a project. Adopts a team approach to identify, classify and cost the uncertainties associated with a project. The sum of the average risk allowance for the identified risk events thus becomes the contingency. A study of the effect of ERA was carried out to compare the variability and consistency of the contingency estimates between non-ERA and ERA projects. The preliminary results of a survey showed a highly significant difference in variation and consistency between these groups. This analysis indicates the successful use of the ERA method for public works projects to reduce unnecessary and  exaggerated allowance for risk. However, the contingency allowance for ERA projects was also considered high. Adds data from the UK with descriptions of 41 private sector projects which fall into the non-ERA category and reflect better performance in the determining of contingency allowances.

Growth and nutrient utilization of Murray cod Maccullochella peelii peelii (Mitchell) fingerlings fed diets with varying levels of soybean meal and blood meal

The Australian native freshwater fish Murray cod, Maccullochella peelii pellii (Mitchell), currently supports a fledgling inland aquaculture industry, which is thought to have considerable growth potential. The aim of this study was to evaluate the suitability of two alternate protein sources [blood meal (BM) and defatted soybean meal (SBM)] as substitutes for fish meal at various levels of inclusion in diets for juvenile Murray cod. The growth performance of juvenile Murray cod in response to nine isonitrogenous and isocalorific diets (50% protein, 14% lipid, 20.2 kJ g⁻¹) consisting of a control diet in which protein was supplied from fish meal, and test diets in which the fish meal protein was substituted at levels of 8%, 16%, 24%, and 32% with BM or SBM was evaluated from a 70-day growth experiment. The per cent apparent dry matter (% ADC_dm) and percentage protein digestibility (% ADC_p) of the test diets were also determined using Cr₂O₃ as a marker. Survival in all the SBM dietary treatments was high but that of fish on the BM dietary treatments was significantly (P < 0.05) lower than in all the other dietary treatments. Specific growth rate (% day−1) of Murray cod fed SBM incorporated diets ranged from 1.63 ± 0.06 to 1.78 ± 0.10 and even at the highest level tested (32% of the dietary protein from SBM) was not significantly different (P > 0.05) from the fish fed the control diet (1.65 ± 0.09). Feed conversion ratios of the SBM dietary treatments ranged from 1.36 ± 0.08 to 1.45 ± 0.07. The protein efficiency ratios and protein conversion efficiencies of Murray cod in the soybean meal treatments were also good and for a majority of the SBM diets were better than those for the control diet. Per cent ADC_dm and ADC_p of the SBM diets tested ranged from 70.6 ± 1.46 to 72.3 ± 1.81% and 88.6 ± 0.57 to 90.3 ± 0.17%, respectively, and was not significantly different (P > 0.05) from the control diet (% ADC_dm 74.3 ± 1.63; % ADC_p 91.3 ± 0.55). The reasons for significantly poor survival and growth of Murray cod reared on BM incorporated diets, and relatively poor digestibility of these diets are discussed. The study shows that for Murray cod diets in which fish meal protein is substituted up to 32% performance or carcass composition is not compromised.

Multi-temporal land use mapping using remotely sensed techniques and the integration of a pollutant load model in a GIS

Estimation of nutrient load production based on multi-temporal remotely sensed land-use data for the Glenelg-Hopkins region in southwest Victoria, Australia, is discussed. Changes in land use were mapped using archived Landsat data and computerized classification techniques. Land-use
change is unparalleled in recent history, with 13% of the region transformed in the last decade. Total nitrogen and phosphorus loading were estimated using an export coefficient model. The analysis demonstrated a disturbing increase in nitrogen and phosphorus loadings from 1995 to 2002. Whilst such increases were suspected from past anecdotal and ad-hoc evidence, our modelling quantitatively estimated such increases and thus demonstrated the enormous potential of using remote sensing and GIS for monitoring land-use change and hence improve land-use management.

Validation of the use of input-output data for embodied energy analysis of the Australian construction industry

This paper evaluates a recently developed hybrid method for the embodied energy analysis of the Australian construction industry. It was found that the truncation associated with process analysis can be up to 80%, whilst the use of input-output analysis alone does not always provide a perfect model for replacing process data. There is also a considerable lack in the quantity and possibly quality of process data currently available. These findings suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependant upon data quality and availability. The hybrid method evaluated can be used for the optimisation of embodied energy and for identifying opportunities for improvements in energy efficiency.