Studies on the photochemical stability of organo phosphorus insecticides for textile mothproofing

The light stability of 0,0-diethyl-0-(4-ethylthiophenyl)phosphorothioate, a parent structure of a new class of fibre-reactive organophosphorus insectproofing agents for use on wool textiles was extensively examined. The rate of degradation of 0,0-diethyl-0-(4-ethylthiophenyl)phosphoro-thioate in polar and non-polar solution and on wool upon irradiation by simulated sunlight was investigated using high performance liquid chromatography.. The major photodegradation products in each case were correlated with the HPLC retention times of synthetically prepared compounds. The main product formed was the sulphoxide, 0,0-diethyl-O-(4-ethylsulphinylphenyl)phosphorothioate, whose insecticidal activity against the major textile pests was shown to be similar to that of the parent compound. In polar solution a polar product which could not be identified was formed. Both 4-ethylsulphinylphenol and 4-ethyIsulphony1-phenol were found on wool but not in solution. The effect of various ultraviolet stabilizers on the rate of photodegradation of 0,0-diethyl-0-(4-ethylthiophenyl)phosphorothioate was also examined. Ultraviolet absorbers of the 2-hydroxybenzophenone and 2-hydroxybenzotriazole classes conferred the best protection in each case. However, on wool typical wool dyes applied at conventional levels were also effective.

Solving the median shortest path problem in the planning and design of urban transportation networks using a vector labeling algorithm

This paper proposes an alternative algorithm to solve the median shortest path problem (MSPP) in the planning and design of urban transportation networks. The proposed vector labeling algorithm is based on the labeling of each node in terms of a multiple and conflicting vector of objectives which deletes cyclic, infeasible and extreme-dominated paths in the criteria space imposing cyclic break (CB), path cost constraint (PCC) and access cost parameter (ACP) respectively. The output of the algorithm is a set of Pareto optimal paths (POP) with an objective vector from predetermined origin to destination nodes. Thus, this paper formulates an algorithm to identify a non-inferior solution set of POP based on a non-dominated set of objective vectors that leaves the ultimate decision to decision-makers. A numerical experiment is conducted using an artificial transportation network in order to validate and compare results. Sensitivity analysis has shown that the proposed algorithm is more efficient and advantageous over existing solutions in terms of computing execution time and memory space used.

An algorithm to median shortest path problem (MSPP) in the design of urban transportation networks

This paper proposes an efficient solution algorithm for realistic multi-objective median shortest path problems in the design of urban transportation networks. The proposed problem formulation and solution algorithm to median shortest path problem is based on three realistic objectives via route cost or investment cost, overall travel time of the entire network and total toll revenue. The proposed solution approach to the problem is based on the heuristic labeling and exhaustive search technique in criteria space and solution space of the algorithm respectively. The first labels each node in terms of route cost and deletes cyclic and infeasible paths in criteria space imposing cyclic break and route cost constraint respectively. The latter deletes dominated paths in terms of objectives vector in solution space in order to identify a set of Pareto optimal paths. The approach, thus, proposes a non-inferior solution set of Pareto optimal paths based on non-dominated objective vector and leaves the ultimate decision to decision-makers for purpose specific final decision during applications. A numerical experiment is conducted to test the proposed algorithm using artificial transportation network. Sensitivity analyses have shown that the proposed algorithm is advantageous and efficient over existing algorithms to find a set of Pareto optimal paths to median shortest paths problems.

A non-fullerene electron acceptor based on central carbazole and terminal diketopyrrolopyrrole functionalities for efficient, reproducible and solution-processable bulk-heterojunction devices

A novel, solution-processable non-fullerene electron acceptor, 6,6′-((9-(heptadecan-9-yl)-9H-carbazole-2,7-diyl)bis(thiophene-5,2-diyl))bis(2,5-bis(2-ethylhexyl)-3-(thiophen-2-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione) (coded as N7), based on central carbazole and terminal diketopyrrolopyrrole building blocks was designed, synthesized and characterized. N7 displayed excellent solubility, thanks to its design allowing incorporation of numerous lipophilic chains, thermal stability, and afforded a 2.30% power conversion efficiency with a high open-circuit voltage (1.17 V) when tested with the conventional donor polymer poly(3-hexylthiophene) in solution-processable bulk-heterojunction devices. To our knowledge, not only is N7 the first reported chromophore based on carbazole and diketopyrrolopyrrole functionalities but the open-circuit voltage reported here is among the highest values for a single junction bulk-heterojunction device that has been fabricated using a simple device architecture, with reproducible outcomes and with no special treatment.

Naphthalene diimide-based non-fullerene acceptors for simple, efficient, and solution-processable bulk-heterojunction devices

Two solution processable, non-fullerene electron acceptors, 2,2′-(((2,7-dioctyl-1,3,6,8-tetraoxo-1,2,3,6,7,8-exahydrobenzo[lmn][3,8]phenanthroline-4,9-diyl)bis(thiophene-5,2-diyl))bis(methanylylidene))dimalononitrile (R1) and (2Z,2′Z)-3,3′-((2,7-dioctyl-1,3,6,8-tetraoxo-1,2,3,6,7,8-hexahydrobenzo[lmn][3,8]phenanthroline-4,9-diyl)bis(thiophene-5,2-diyl))bis(2-(4-nitrophenyl) acrylonitrile) (R2), comprised of central naphthalene diimide and two different terminal accepting functionalities, malononitrile and 2-(4-nitrophenyl)acetonitrile, respectively, were designed and synthesised. The central and terminal accepting functionalities were connected via a mild conjugated thiophene linker. Both of the new materials (R1 and R2) displayed high thermal stability and were found to have energy levels matching those of the archetypal electron donor poly(3-hexylthiophene). A simple, solution-processable bulk-heterojunction device afforded a promising power conversion efficiency of 2.24% when R2 was used as a non-fullerene electron acceptor along with the conventional donor polymer poly(3-hexylthiophene). To the best of our knowledge, the materials reported herein are the first examples in the literature where synchronous use of such accepting blocks is demonstrated for the design and development of efficient non-fullerene electron acceptors.

Removal of copper ions from aqueous solution by adsorption onto novel polyelectrolyte film-coated nanofibrous silk fibroin non-wovens

In this approach, polyelectrolyte film-coated nanofibrous silk fibroin (SF) nonwovens were prepared from the alternate deposition of positively charged polyethylenimine (PEI) and negatively charged SF using electrostatic layer-by-layer (LBL) self-assembled technology. The composite membranes were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrometer. The SF-PEI multilayer-assembled nanofibers (less than five layers) were fine and uniform with the fiber diameter from 400 nm to 600 nm, and had very large surface area and high porosity (more than 70%). The amino groups of PEI were proved to be deposited onto SF nonwovens, which granted the coated nonwovens with potential applicability for copper ions adsorption. The PEI films coated SF substrate showed much higher copper ions adsorption capacity than that of ethanol treated SF nanofibers. Adding the number of PEI coated could enhance the Cu²⁺ adsorption capacity significantly. The maximum milligrams per gram of copper ions adsorbed reached 59.7 mg/g when the SF substrate was coated with 5 bilayers of SF-PEI. However, the copper ions adsorption capacity had no obvious change as the number of PEI continued to increase. These results suggest potential for PEL film-coated nanofibrous nonwovens as a new adsorbent for metal ions.

Integrated governance: a possible solution for a sustainable private sector led development in Bangladesh?

In the quest for 'good governance', the developing countries have embarked on ambitious NPM style market-oriented reform policies mainly advocated by international development agencies (IDA) over the last two decades. Bangladesh has been pursuing decades of market-oriented reforms advocated by IDAs with the prime objectives of achieving an efficient, cost effective service delivery through increased involvement of the private sector. The shift towards marketisation has led to a complex, horizontal and networked structure of partnerships between state and non state actors. The private sector and NOOs are now delivering goods and services which were once the exclusive domain of the state. These changes have however, not been associated with changes in institutional arrangements, safeguards and regulation required to support the private sector led development, which is not sustained independently of the context in which it operates. Using the agriculture input sector as an exemplar, this paper explores the constraints of sustainable private sector led development. The paper argues that the main impediment to private sector led development in this sector centre on lack of good governance. In addition, lack of an integrated market structure, market information, capacity and awareness building are other factors that are inhibiting the private sector led development. We argue that a functional governance model is required in Bangladesh that engages the state, civil society and the private sector to work effectively in a participatory approach to deal with the constraints of private sector led development and for improving good governance.

Problem and solution trees : a practical approach for identifying potential interventions to improve population nutrition

Population nutrition problems have a diversity of contributory factors and, ideally, multi-sectoral solutions should be developed by the relevant stakeholders, based on a common understanding of these factors. The problem and solution tree approach is a participatory process of working through the layers of determinants and then developing potential interventions for a specific issue, using the available data and expertise. We tailored this approach for non-communicable disease-related nutrition problems in Pacific Islands and applied it in several countries. The process led to the identification of a considerable range of determinants of unhealthy diets and potential interventions to improve the situation. This practical approach also offered the additional benefit of developing stakeholder awareness in the issues. Problem trees are a relatively simple tool to implement, easy to adapt to differing needs, can generate a wealth of information and can be more widely used.

Theodicy : the solution to the problem of evil, or part of the problem?

Theodicy, the enterprise of searching for greater goods that might plausibly justify God’s permission of evil, is often criticized on the grounds that the project has systematically failed to unearth any such goods. But theodicists also face a deeper challenge, one that places under question the very attempt to look for any morally sufficient reasons God might have for creating a world littered with evil. This ‘anti-theodical’ view argues that theists (and non-theists) ought to reject, primarily for moral reasons, the project of ‘justifying the ways of God to men’. Unfortunately, this view has not received the serious attention it deserves, particularly in analytic philosophy of religion. Taking my cues from such anti-theodicists as Kenneth Surin, D.Z. Phillips and Dostoyevsky’s Ivan Karamazov, I defend several reasons for holding that the way of thinking about God and evil enshrined in theodical discourse can only add to the world’s evils, not remove or illuminate them.

Non-Deterministic Exploration through Parametric Design

This paper explores non-deterministic parametric modelling as a design tool. Specifically, it addresses the application of parametric variables to the generation of a conceptual bridge design and the use of repeatable discrete components to the conceptual form. In order to control the generation of the bridge form, a set of design variables based on the concept of a law curve have been developed.These design variables are applied and tested through interactive modelling and variation, driven by manipulating the law curve. Combining this process with the application and control of a repeatable element, known as a Representative Volumetric Element (RVE), allows for the development and exploration of a design solution that could not be achieved through the use of conventional computer modelling.The competition brief for the Australian Institute of Architects (AIA) ‘Dialectical Bridge’ has been used as a case study to demonstrate the use of non-deterministic parametric modelling as a design tool.The results of the experimentation with parametric variables, the law curve and representative volumetric elements (RVE) are presented in the paper.

Dispersion of boron nitride nanotubes in aqueous solution with the help of ionic surfactants

We report that ammonium oleate surfactants can help the dispersion of multiwalled boron nitride nanotubes (BNNTs) in water to form a BNNT solution stable for several months, which was due to the non-covalent functionalization of nanotube surfaces. Fourier Transform Infrared Spectroscopy (FTIR) and Photoluminescence (PL) analysis with synchrotron radiation source revealed that this BNNT aqueous solution preserves the intrinsic optical properties of BNNTs. © 2009 Elsevier Ltd. All rights reserved.

Natural convection in domed porous enclosures : non-darcian flow

The natural-convection flow and associated heat transfer in a fluid-saturated porous medium have been investigated using the generalized porous medium approach for a dome-shaped enclosure. Many new features have been predicted with the connective heat transfer and the shape of the top dome cover. The solutions are obtained for a wide range of Darcy and Rayleigh numbers for different offsets and eccentricities of the top dome covers. The detailed parametric study reveals that there is a significant change in heat transfer rate when the offset is between 0.2 and 0.4. Different shapes of conic section, such as circular, elliptical, parabolic, and hyperbolic are used for the top dome cover, and their effects on natural convection and heat transfer rates are studied.

A non-darcian numerical modeling in domed enclosures filled with heat-generating porous media

Numerical study of the natural-convection flow and heat transfer in a dome-shaped, heat-generating, porous enclosure is considered. The general conic equation for the top dome is used to consider various conical top sections such as circular, elliptical, parabolic, and hyperbolic. The individual effect of fluid Rayleigh, Darcy, and heat-generating parameters on flow patterns and heat transfer rates are analyzed and presented. The predicted results show that the heat-generating parameter has the most significant contribution toward the growth of bicellular core flow. Moreover, there is significant change in temperature distribution in comparison to rectangular enclosures, due to the existence of the domed-shape top adiabatic cover. The results also show that, regardless of Darcy and Rayleigh values, a flat adiabatic top cover tends to yield the highest value of Nusselt number, followed by circular, elliptical, parabolic, and hyperbolic top covers, respectively.

Shear-enhanced solution precipitation : a simple process to produce short polymeric nanofibers

The growing interest in polymeric nanofibers has been increasing the push for the development of simple and efficient nanofiber-preparation techniques. We herein describe how a conventional solution process is readapted to suit the needs for fast and efficient production of short polymeric nanofibers. Poly(ethylene-co-acrylic acid) (PEAA), a semi-crystalline polymer, was used as model. When a PEAA solution was injected into an alcoholic non-solvent while simultaneously applying high shear to the non-solvent system, PEAA nanofibers were obtained with average diameter as thin as 113 nm and length as short as 4.5 _m. The fiber diameter and length were also adjustable by varying the operating parameters. This one-step technique advances the currently available nanofabrication tools by adjusting a widely accepted concept to the nano-scale. It may constitute a viable method for large-scale production of short polymeric nanofibers.

"The solution needs to be complex." Obese adults' attitudes about the effectiveness of individual and population based interventions for obesity

Background
Previous studies of public perceptions of obesity interventions have been quantitative and based on general population surveys. This study aims to explore the opinions and attitudes of obese individuals towards population and individual interventions for obesity in Australia.

Methods
Qualitative methods using in-depth semi-structured telephone interviews with a community sample of obese adults (Body Mass Index ≥30). Theoretical, purposive and strategic recruitment techniques were used to ensure a broad sample of obese individuals with different types of experiences with their obesity. Participants were asked about their attitudes towards three population based interventions (regulation, media campaigns, and public health initiatives) and three individual interventions (tailored fitness programs, commercial dieting, and gastric banding surgery), and the effectiveness of these interventions.

Results
One hundred and forty two individuals (19-75 years) were interviewed. Participants strongly supported non-commercial interventions that were focused on encouraging individuals to make healthy lifestyle changes (regulation, physical activity programs, and public health initiatives). There was less support for interventions perceived to be invasive or high risk (gastric band surgery), stigmatising (media campaigns), or commercially motivated and promoting weight loss techniques (commercial diets and gastric banding surgery).

Conclusion
Obese adults support non-commercial, non-stigmatising interventions which are designed to improve lifestyles, rather than promote weight loss.