A pixel-based approach to estimation of solar energy potential on building roofs

Precise estimation of solar energy on building roofs plays a critical role in sustainable development and renewable energy consumption of high-density human habitats. Conventional solar radiation models based on costly Light Detection and Ranging (LiDAR) data are only adequate for existing buildings, not for future construction areas. In this paper, a pixel-based methodology is constructed for estimating solar energy potential over roofs. Buildings with flat roofs in a newly planned construction area are chosen as a case study. The solar radiation at a certain cell is mathematically formulated in the pixel unit, and its yields over a certain time period are calculated by considering multiple instantaneous solar irradiances and are visually presented by image processing. Significant spatial and temporal variations in solar radiation are measured. Within the study area, the maximum and minimum annual radiation yields are estimated at 4717.72 MJ/m2/year and 342.58 MJ/m2/year respectively. Radiation contour lines are then mapped for outlining installation ranges of various solar devices. For each apartment building, around 20% of roof areas can obtain 4500 MJ/m2/year or more solar radiation yields. This study will benefit energy investors and urban planners in accurately predicting solar radiation potential and identifying regions with high radiation over building roofs. The results can be utilised in government policies and urban planning to raise awareness of the use of renewable energy sources.

Identifying markov blankets using lasso estimation

Determining the causal relation among attributes in a domain is a key task in data mining and knowledge discovery. The Minimum Message Length (MML) principle has demonstrated its ability in discovering linear causal models from training data. To explore the ways to improve efficiency, this paper proposes a novel Markov Blanket identification algorithm based on the Lasso estimator. For each variable, this algorithm first generates a Lasso tree, which represents a pruned candidate set of possible feature sets. The Minimum Message Length principle is then employed to evaluate all those candidate feature sets, and the feature set with minimum message length is chosen as the Markov Blanket. Our experiment results show the ability of this algorithm. In addition, this algorithm can be used to prune the search space of causal discovery, and further reduce the computational cost of those score-based causal discovery algorithms.

Joint space-time trellis decoding and channel estimation in correlated fading channels

This letter addresses the issue of joint space-time trellis decoding and channel estimation in time-varying fading channels that are spatially and temporally correlated. A recursive space-time receiver which incorporates per-survivor processing (PSP) and Kalman filtering into the Viterbi algorithm is proposed. This approach generalizes existing work to the correlated fading channel case. The channel time-evolution is modeled by a multichannel autoregressive process, and a bank of Kalman filters is used to track the channel variations. Computer simulation results show that a performance close to the maximum likelihood receiver with perfect channel state information (CSI) can be obtained. The effects of the spatial correlation on the performance of a receiver that assumes independent fading channels are examined.

Accuracy of body size estimation: Role of biopsychosocial variables

This study evaluated factors related to the perceptual disturbances of body image. Using a digital body image computer program, 191 participants (107 women, 82 men) adjusted an image of their body to the perceived actual size at five body regions; chest, waist, hips, thighs and calves. A neutral object (a vase) was also adjusted to partial out the level of perceptual distortion present with a neutral object. Men and women overestimated the size of the neutral object and their body image. Among women, overestimation was primarily predicted by high levels of depression, and media and peer influences to be thinner and increase muscles. Among men, overestimation was predicted by high BMI, media influences to lose weight and increase muscles, and peer influences to increase muscles. These findings suggest that perceptual accuracy of body image is primarily predicted by biopsychosocial influences.

Parameter estimation of one-class SVM on imbalance text classification

Compared with conventional two-class learning schemes, one-class classification simply uses a single class for training purposes. Applying one-class classification to the minorities in an imbalanced data has been shown to achieve better performance than the two-class one. In this paper, in order to make the best use of all the available information during the learning procedure, we propose a general framework which first uses the minority class for training in the one-class classification stage; and then uses both minority and majority class for estimating the generalization performance of the constructed classifier. Based upon this generalization performance measurement, parameter search algorithm selects the best parameter settings for this classifier. Experiments on UCI and Reuters text data show that one-class SVM embedded in this framework achieves much better performance than the standard one-class SVM alone and other learning schemes, such as one-class Naive Bayes, one-class nearest neighbour and neural network.

Development of a food composition database for the estimation of dietary intakes of glucosinolates, the biologically active constituents of cruciferous vegetables

Evidence indicates that cruciferous vegetables are protective against a range of cancers with glucosinolates and their breakdown products considered the biologically active constituents. To date, epidemiological studies have not investigated the intakes of these constituents due to a lack of food composition databases. The aim of the present study was to develop a database for the glucosinolate content of cruciferous vegetables that can be used to quantify dietary exposure for use in epidemiological studies of diet–disease relationships. Published food composition data sources for the glucosinolate content of cruciferous vegetables were identified and assessed for data quality using established criteria. Adequate data for the total glucosinolate content were available from eighteen published studies providing 140 estimates for forty-two items. The highest glucosinolate values were for cress (389 mg/100 g) while the lowest values were for Pe-tsai chinese cabbage (20 mg/100 g). There is considerable variation in the values reported for the same vegetable by different studies, with a median difference between the minimum and maximum values of 5·8-fold. Limited analysis of cooked cruciferous vegetables has been conducted; however, the available data show that average losses during cooking are approximately 36 %. This is the first attempt to collate the available literature on the glucosinolate content of cruciferous vegetables. These data will allow quantification of intakes of the glucosinolates, which can be used in epidemiological studies to investigate the role of cruciferous vegetables in cancer aetiology and prevention.

Ensemble parameter estimation for graphical models

Parameter Estimation is one of the key issues involved in the discovery of graphical models from data. Current state of the art methods have demonstrated their abilities in different kind of graphical models. In this paper, we introduce ensemble learning into the process of parameter estimation, and examine ensemble parameter estimation methods for different kind of graphical models under complete data set and incomplete data set. We provide experimental results which show that ensemble method can achieve an improved result over the base parameter estimation method in terms of accuracy. In addition, the method is amenable to parallel or distributed processing, which is an important characteristic for data mining in large data sets.

Disparity estimation using TI multi-wavelet transform

A multi-resolution image matching technique based on translation invariant discrete multi-wavelet transform followed by a coarse to fine matching strategy is presented. The technique addresses the estimation of optimal corresponding points and the corresponding disparity maps in the presence of occlusion, ambiguity and illuminative variations in the two perspective views taken by two different cameras or at different lighting conditions. The problem of occlusion and ambiguity is addressed explicitly by a geometric optimization approach along with the uniqueness constraint whereas the illuminative variation is dealt with by using windowed normalized correlation on the discrete multi-wavelet coefficients.

Learning from facial aging patterns for automatic age estimation

Age Specific Human-Computer Interaction (ASHCI) has vast potential applications in daily life. However, automatic age estimation technique is still underdeveloped. One of the main reasons is that the aging effects on human faces present several unique characteristics which make age estimation a challenging task that requires non-standard classification approaches. According to the speciality of the facial aging effects, this paper proposes the AGES (AGing pattErn Sub-space) method for automatic age estimation. The basic idea is to model the aging pattern, which is defined as a sequence of personal aging face images, by learning a representative subspace. The proper aging pattern for an unseen face image is then determined by the projection in the subspace that can best reconstruct the face image, while the position of the face image in that aging pattern will indicate its age. The AGES method has shown encouraging performance in the comparative experiments either as an age estimator or as an age range estimator.

Robust video/ultrasonic fusion based estimation for automotive applications

We describe how object estimation by a stationary or a non-stationary camera can be improved using recently-developed robust estimation ideas. The robustness of vision-based systems can be improved significantly by employing a Robust Extended Kalman Filter (REKF). The system performance is also enhanced by increasing the spatial diveristy in measurements via employing additional cameras for video capture. We describe a normal-flow based image segmentation technique to identify the object for the application of our proposed state estimation technique. Our simulations demonstrate that dynamic system modelling coupled with the application of a REKF significantly improves the estimation system performance, especially when large uncertainties are present.

State and input simultaneous estimation for a class of nonlinear systems

This paper addresses the problem of estimating simultaneously the state and input of a class of nonlinear systems. Here, the systems nonlinear part comprises a Lipschitz nonlinear function with respect to the state and input, and a state-dependent unknown function including additive disturbance as well as uncertain/nonlinear/time-varying terms. Upon satisfying some conditions, the observer design problem can be solved via a Riccati inequality or a LMI-based technique with asymptotic estimation guaranteed. A numerical example is included for illustration.