Enzyme-assisted self-assembly under thermodynamic control

The production of functional molecular architectures through self-assembly is commonplace in biology, but despite advances^{1, 2, 3}, it is still a major challenge to achieve similar complexity in the laboratory. Self-assembled structures that are reproducible and virtually defect free are of interest for applications in three-dimensional cell culture^{4, 5}, templating⁶, biosensing⁷ and supramolecular electronics⁸. Here, we report the use of reversible enzyme-catalysed reactions to drive self-assembly. In this approach, the self-assembly of aromatic short peptide derivatives^{9, 10} provides a driving force that enables a protease enzyme to produce building blocks in a reversible and spatially confined manner. We demonstrate that this system combines three features: (i) self-correction—fully reversible self-assembly under thermodynamic control; (ii) component-selection—the ability to amplify the most stable molecular self-assembly structures in dynamic combinatorial libraries^{11, 12, 13}; and (iii) spatiotemporal confinement of nucleation and structure growth. Enzyme-assisted self-assembly therefore provides control in bottom-up fabrication of nanomaterials that could ultimately lead to functional nanostructures with enhanced complexities and fewer defects.

Self-assembly and film stability of a micelle of a single-chain quaternary ammonium amphiphile containing azobenzene on mica

The self-assembling behavior of a single-chain quaternary ammonium amphiphile bearing azobenzene (C₁₂AzoC₆N⁺) on freshly cleaved mica sheet has been investigated by atomic force microscopy (AFM) method. Confocal microscopic Raman spectra confirm the adsorption of the self-assembled monolayer structure. Ex-situ AFM reveals that C₁₂AzoC₆N⁺ forms branch-like stripes indicating the fusion and reorganization of the micelles during drying in air as the in-situ AFM has revealed that surfactant forms spherical micelles on the mica surface. The nano-sized surface structure is strongly dependent on the change of molecular structure, which resulted from photo-induced isomerization. The nano-sized stripe is quite stable even being annealed at 90 °C for 4 h.

Bioinspired strategy to reinforce PVA with improved toughness and thermal properties via hydrogen-bond self-assembly

Despite the high strength and stiffness of polymer nanocomposites, they usually display lower deformability and toughness relative to their matrices. Spider silk features exceptionally high stiffness and toughness via the hierarchical architecture based on hydrogen-bond (H-bond) assembly. Inspired by this intriguing phenomenon, we here exploit melamine (MA) to reinforce poly(vinyl alcohol) (PVA) via H-bond self-assembly at a molecular level. Our results have shown that due to the formation of physical cross-link network based on H-bond assembly between MA and PVA, yield strength, Young’s modulus, extensibility, and toughness of PVA are improved by 22, 25, 144, and 200% with 1.0 wt % MA, respectively. Moreover, presence of MA can enhance the thermal stability of PVA to a great extent, even exceeding some nanofillers (e.g., graphene). This work provides a facile method to improve the mechanical properties of polymers via H-bond self-assembly.

Synthesis and preliminary investigations into norbornane-based amphiphiles and their self-assembly

A range of norbornane based amphiphiles, which possess a rigid 'kink' in the centre of amphiphiles, were accessed via a concise four step synthesis. The self-assembly properties of these novel compounds were then investigated and the critical aggregation concentration (CAC), hydrodynamic diameter (DH) by dynamic light scattering (DLS) and their morphology by cryogenic transmission electron microscopy (cryoTEM) and negatively stained transmission electron microscopy (TEM) were determined. These compounds while possessing similar CAC values (50-70 μM) exhibited a wide variety of particle size (60-140 nm) and morphologies, including vesicles, cigar-shaped aggregates and rod-like micelles. Considering the similarities in molecular structure we have proposed that the unique nature of the molecular 'kink' is affecting molecular assembly in which subtle changes in molecular structure have large ramifications on aggregate size and morphology.

Azobenzene moiety variation directing self-assembly and photoresponsive behavior of azo-surfactants

The effect of varying the position of the azobenzene group within two comparable photoresponsive amphiphiles on their capability to form lyotropic liquid crystals (LLCs) was investigated in detail in this study. Two photoresponsive amphiphiles having comparable structures were designed and synthesized consisting of hydrophilic oligooxyethylene units, a hydrophobic alkyl chain and a light-sensitive azobenzene moiety. When the azobenzene group was located in the middle of the hydrophobic alkyl chain, multiple LLC phases were observed at various water contents in the azo-surfactant–water binary system. In contrast, when the azobenzene group was directly attached to the hydrophilic domain, the azo-surfactant–water binary system exhibited only lamellar phases. The temperature dependence of these self-organised nanostructures was also investigated by the combination of small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and rheology. Under alternating UV and visible light irradiation, reversible trans–cis photoisomerization of the azobenzene group occurred efficiently in dilute solution for both azo-surfactants. However, only photoisomerization of the surfactant possessing the azobenzene group localized in the middle of the alkyl chain induced significant changes in the self-assembled structure and its bulk properties. This study demonstrates that self-assembly and photoresponsive behaviour of photosensitive amphiphiles is extremely sensitive to the position of the photoactive moiety within the surfactant molecular architecture.

A facile method to fabricate carbon nanostructures via the self-assembly of polyacrylonitrile/poly (methyl methacrylate-b-polyacrylonitrile) AB/B' type block copolymer/homopolymer blends

The self-assembly and high temperature behavior of AB/B′ type block copolymer/homopolymer blends containing polyacrylonitrile (PAN) polymers were studied for the first time. Here, microphase separated nanostructures were formed in the poly(methyl methacrylate-b-polyacrylonitrile) (PMMAN) block copolymer and their blends with homopolymer PAN at various blend ratios. Additionally, these nanostructures were transformed into porous carbon nanostructures by sacrificing PMMA blocks via pyrolysis. Spherical and worm like morphologies were observed in both TEM and AFM images at different compositions. The thermal and phase behavior examinations showed good compatibility between the blend components in all studied compositions. The PAN homopolymer (B′) with a comparatively higher molecular weight than the corresponding block (B) of the block copolymer is expected to exhibit ‘dry brush’ behavior in this AB/B′ type system. This study provides a basic understanding of the miscibility and phase separation in the PMMAN/PAN system, which is important in the nanostructure formation of bulk PAN based materials with the help of block copolymers to develop advanced functional materials.

Synthesis and self-assembly behaviour of poly(Nα-Boc-l-tryptophan)-block-poly(ethylene glycol)-block-poly(Nα-Boc-l-tryptophan)

We report for the first time the use of Nα-Boc-l-tryptophan for the synthesis of amphiphilic BAB triblock copolymers for potential drug delivery applications. A library of poly(Nα-Boc-l-tryptophan)-block-poly(ethylene glycol)-block-poly(Nα-Boc-l-tryptophan) (PBoclTrp-b-PEG-b-PBoclTrp) amphiphilic copolymers were synthesized through the ring opening polymerization of Nα-Boc-l-tryptophan Nα-carboxy anhydride as initiated by diamino-terminated PEG of fixed molecular weight (Mn 3350). The influence of the hydrophobic block length over self-assembly was investigated for 4 of the BAB copolymers of molecular weights varying between Mn 5000 and Mn 17000. It was found that an increase in hydrophobic block length led to an increase in hydrodynamic size of aggregates in solution, as well as a decrease in critical micelle concentration. TEM analysis showed the formation of spherical micelles with the largest of the copolymers forming interconnected networks of spherical micelles. The influence of hydrophobic block length over the formation of secondary structure was analyzed using circular dichroism and infrared spectroscopy. Collectively we found that the presence of t-Boc protected l-tryptophan leads to the preferential formation of α-helix secondary structure through hydrogen bonding, which, in a drug delivery vehicle context, could help in controlling drug release. Also, it is believed that the use of novel Nα-Boc-l-tryptophan could improve drug stabilization in the hydrophobic core via π-π interactions between indole rings.

Anion recognition and anion-mediated self-assembly with thiourea-functionalised fused [3]polynorbornyl frameworks

Three conformationally preorganised host molecules based on the [3]polynorbornyl framework and incorporating di-urea receptors were synthesised and their interaction with a series of anions investigated by 1H NMR spectroscopy. A high affinity of each host molecule for dihydrogenphosphate (H2PO4–) and dihydrogenpyrophosphate (H2P2O72–) was identified. In addition to binding to the urea receptors of the host molecules, evidence for an interaction involving the non-polar C–H groups within the binding cavity of the framework and guest anions was also discovered. Furthermore, an unusual 2 : 1 host-to-anion stoichiometry was indicated when binding H2P2O72–, and a model for the anion-mediated self-assembly of this complex species is proposed.

Flux-assisted self-assembly of monodisperse colloids

We have developed a novel method to grow ordered layers of monodisperse colloids on a flat substrate. The evaporation of the colloidal suspension in the presence of the inclined substrate is strengthened by an external gas flux directed on the meniscus. The meniscus oscillations caused by the gas flux have an evident effect on the ordering of the spheres on the substrate. Thick films (more than 150 layers in a single-step deposition) of large area single crystals (1 cm2) can be obtained in a very short time (~1 cm/h maximum growth rate) and from very diluted suspensions (up to 0.022% volume fraction).

Tunable wettability of polyimide films based on electrostatic self-assembly of ionic liquids

We have demonstrated that the surface wettability of negatively charged polyimide films could be turned by electrostatic self-assembly of ionic liquids. The water contact angles of the polyimide films varied in the range 27-80 degrees for 13 different ionic liquids based on imidazolium and ammonium salts. The surface morphology of the resulting surfaces was characterized using atomic force microscopy. The results revealed that the assembly of longer-substituent cations was characterized by the formation of spherical nanoparticles that were formed due to sequent aggregation of cations on those electrostatically assembled ones via hydrophobic interaction. In this case, the counteranions are present in the assembled layers and the wettability is accordingly affected. Whereas for shorter-substituent cations, no aggregates were formed due to the less hydrophobic interaction than the electrostatic repulsive interaction between the cations, and the counteranions were absent from the assembled layers. This method can also be utilized to quantify the hydrophobicity of various ionic liquids.

The application of self-assembly monolayer technique into fabricating multilayer nanofilm

Self-Assembly Monolayer (SAM) technique, as a novel and developing technique for fabricating layer-by-layer nanofilm on substrates of various sizes, shapes and materials, has received more and more attention in the areas of light-emitting devices, nonlinear optical materials, conductive films, permselective gas membranes, sensors, modification of electrodes, resistance and printing technique. In comparison with other traditional methods, SAM technique has many significant advantages, including simple process, universality, formation with densely packed, well defined, highly ordered surfaces. This paper will give a review on the recent development in SAM technique.

Competitive hydrogen bonding and self-assembly in Poly(2-vinyl pyridine)-block-Poly(methyl methacrylate)/ Poly(hydroxyether of bisphenol A) blends

Blends of poly(2-vinyl pyridine)-block-poly(methyl methacrylate) (P2VP-b-PMMA) and poly(hydroxyether of bisphenol A) (phenoxy) were prepared by solvent casting from chloroform solution. The specific interactions, phase behavior and nanostructure morphologies of these blends were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this block copolymer/homopolymer blend system, it is established that competitive hydrogen bonding exists as both blocks of the P2VP-b-PMMA are capable of forming intermolecular hydrogen bonds with phenoxy. It was observed that the interaction between phenoxy and P2VP is stronger than that between phenoxy and PMMA. This imbalance in the intermolecular interactions and the repulsions between the two blocks of the diblock copolymer lead to a variety of phase morphologies. At low phenoxy concentration, spherical micelles are observed. As the concentration increases, PMMA begins to interact with phenoxy, leading to the changes of morphology from spherical to wormlike micelles and finally forms a homogenous system. A model is proposed to describe the self-assembled nanostructures of the P2VP-b-PMMA/phenoxy blends, and the competitive hydrogen bonding is responsible for the morphological changes.

Engineering molecular self-assembled fibrillar networks by ultrasound

The architecture of self-organized three-dimensionally interconnected nanocrystal fibrillar networks has been achieved by ultrasound from a solution consisting of separate spherulites. The ultrasound stimulated structural transformation is correlated to the striking ultrasonic effects on turning nongelled solutions or weak gels into strong gels instantly, with enhancement of the storage modulus up to 3 magnitudes and up to 4 times more gelling capability. The basic principle involved in the ultrasound-induced structural transformation is established on the basis of the nucleation-and-growth model of a fiber network formation, and the mechanism of seeding multiplication, aggregation suppressing, and fiber distribution and growth promotion is proposed. This novel technique enables us to produce self-supporting gel functional materials possessing significantly modified macroscopic properties, from materials previously thus far considered to be “useless”, without the use of chemical stimuli. Moreover, it provides a general strategy for the engineering of self-organized fiber network architectures, and we are consequently able to achieve the supramolecular functional materials with controllable macroscopic properties.

Self-assembly of gold nanowires along carbon nanotubes for ultrahigh-aspect-ratio hybrids

We report a novel approach for the assembly of one-dimensional hybrid nanostructures that consist of gold nanowires with ultrahigh aspect ratios (L/d > 500) self-assembled along the axes of multiwalled carbon nanotubes. The micrometer-long hybrid nanowires exhibit high electrical conductivity and can be easily microcontact-printed onto various substrates in a patterned form, suggesting that these hybrids have considerable potential as interconnects for nanoelectronic applications.