Interfacial energy states of moisture-exposed cracks in mica

Results of crack growth observations on mica in water-containing environments are described. The study focuses on equilibrium crack states for reversed loading cycles, i.e., for initial propagation through virgin solid and subsequent retraction-repropagation through healed or misoriented-healed interfaces. Departures from these equilibrium states are manifest as steady-state forward or backward crack velocities at specific applied loads. The equilibria are thereby interpreted as quiescent, threshold configurations G = W_E, with G the Griffith mechanical-energy-release rate and W_E the Dupré work of adhesion, on crack velocity (v-G) diagrams. Generally, W_E is found to decrease with concentration of water, in accordance with a Gibbs formalism. Hysteresis is observed in the forward-backward-forward crack propagation cycle, signifying a reduction in the adhesion energy on exposure of the open interface to environmental species prior to healing. This hysteresis is especially marked for those interfaces that are misoriented before healing, indicating that the structure of the underlying solid substrate as well as of the intervening fluid is an important consideration in the interface energetics. The equilibrium states for different environments can be represented on a simple energy-level diagram, as differences between thermodynamic end-point states: initial, closed-interface states refer to crystallographic bonding configurations ahead of the crack-tip adhesion zone; final, open interface states refer to configurations behind the crack-tip zone. The significance of this diagram in relation to the fundamental atomic structure of interfaces in fracture and other adhesion geometries, including implications concerning kinetics, is discussed.

Repulsive interaction between coplanar cracks in the double–cantilever geometry

Experiments on thin mica sheets are used to demonstrate that coplanar cracks in double-cantilever beam specimens do not universally attract each other, as conventionally portrayed, but, at long range, actually repel. An elasticity analysis explains the repulsion in terms of a compression zone, 0.35 times the beam half-thickness ahead of the crack tip, generated by bending moments from the cantilever arms on the remaining specimen section.

Selection of roost sites by the lesser long-eared bat (Nyctophilus geoffroyi) and Gould`s wattled bat (Chalinolobus gouldii) in south-eastern Australia

Physical characteristics of roost sites used by the lesser long-eared bat Nyctophilus geoffroyi and Gould's wattled bat Chalinolobus gouldii were investigated in a farmland–remnant vegetation mosaic and adjacent forested floodplain in south-eastern Australia. A total of 45 individuals of N. geoffroyi and 27 C. gouldii were fitted with radio-transmitters, resulting in the location of 139 and 89 roosts, respectively. Male N. geoffroyi roosted in trees, fallen and decayed timber and artificial structures. These roosts were low to the ground, mainly under bark and in cracks in timber. Roosts of female N. geoffroyi were located higher above ground, and all within trees. Maternity roosts were predominantly located in large dead trees, approximately twice the diameter of roost trees used by females outside the breeding season. No maternity roosts were found under bark, despite half the roosts used by non-breeding females being located in these situations. Both sexes roosted primarily in dead timber and used cavities where the narrowest dimension of the entrance was 2.5 cm. Most roosts of C. gouldii were in dead spouts on large, live river red gum Eucalyptus camaldulensis trees. Intraspecific differences in roost characteristics were less pronounced for this species. Despite access to the same roosting opportunities, there were marked differences in roost selection between N. geoffroyi and C. gouldii. Both species favoured large diameter trees, but differed significantly for all other measured variables: type of roost structure, condition of roost tree (live or dead), height of roost tree, height of roost, and entrance dimensions. Although these species are among the most widespread bats in Australia and are often considered to be habitat 'generalists', both displayed a high level of discrimination in the roosts used. Clearly, roosting requirements are a complex and important issue in the conservation of even the most common species of bats.

Permian soft-sediment deformation structures related to earthquake in the Southern Sydney Basin, Eastern Australia

Sydney Basin is located in the eastern part of Australia, Lachlan Fold Belt, and between the New England Fold Belt. From the Sydney basin at the end of the Late Carboniferous to Middle Triassic experienced back-arc spreading to the foreland basin at different stages: back-arc spreading stage (Carboniferous ), A passive thermal subsidence stage (early in the Permian Berry) and load deflection extruding stage (in Broughton Permian - Triassic). This time at the Sydney basin on the eastern side of the New England Fold Belt for the island Background of the arc. As a result, back-arc in the Permian Basin of the South Sydney basin by the back-arc spreading the eastern side of the arc and trench subduction before the impact of strong seismic activity, the development of a series of earthquake-related seismites to form various types and Seismic activity related to the deformation of soft sediment structure. Permian Basin, South Sydney's soft sediment deformation including cracks in shock-fold, liquefied vein, volcanic sand, load structure, flame Construction, pillow-like structure, spherical structure, pillow Layer structure slump, and so breccia. To which the cracks in shock-fold fibrillation is a direct result of earthquake faults and folds; pillow is a layer of sand caused by the earthquake fibrillation dehydration, the formation of the sinking; liquefied vein, Volcanic sand for the liquefaction of sand penetration of the formation of earthquake fissures formed; load structure, flame Construction, pillow-like structure, spherical structure is affected by the earthquake fibrillation in the sand, mudstone interface because of the sinking sand, mud layer formed through ; Slump structures and breccia of the earthquake was caused by the gravitational collapse or the formation of the debris flow. Fissures, earthquake-fold, liquefied vein, volcanic sand, load structure, flame Construction, pillow-like structure, spherical structure, pillow-like layer Equivalent to the original earthquake rocks the plot, and the slump structures and breccia of the plot belong to different earthquake rocks.

The effects of ultrasonic agitation in laundering on the properties of wool fabrics

This paper investigates the use of ultrasonic agitation as a method for reducing felting and area shrinkage during the laundering of wool fabric. Work was conducted to evaluate the changes in fibre and fabric properties after repeated exposure to ultrasonic agitation, and also the effectiveness of ultrasonic treatment to remove common stains. Fabric colour, appearance, tensile strength, dimensional stability and thickness were measured before and after each test. Ultrasonic agitation produced fine cracks in the scale structure of the fibre, but these had negligible effects on the strength and colour when compared to hand washing. Ultrasonic agitation caused less fibre migration than hand washing, with a reduced rate of thickness increase and felting. Ultrasonic agitation increased the level of stain removed from the fabric when compared with hand washing.

What is a presentational media regime? The contemporary breakdown in systems of representation

Foundational to both the operation and legitimation of our traditional media is the idea of representation: in some sense the images of television, the sounds of radio, the narratives of film, and the various public personalities stand in or in place of ourselves. Likewise our contemporary political system function as an elaborate representational system, where regions, "seats", electorates, the nation, and the nationstate are represented by individuals, parties and symbols. Although, there are differences between and among modern nation-states as clearly different political and cultural agendas are at play, the interplay of contemporary media, culture and politics has produced what can be called a 'representational regime' that more or less operates globally, albeit fragmented into national and regional groupings.

This paper explores the initial stages in the breakdown of this system of representation that has allowed a certain organization of culture and politics to expand and develop over the last two centuries. It acknowledges that central to this regime is something Nick Couldry has identified as "the myth of the mediated centre" (Couldry, 2003). What the paper argues, and therefore differs from Couldry's conclusion, is that there are cracks in the glue that holds the system together and they are emerging in the uses of new media. Through an exploration of presentational media - that is, media that is more involved with the presentation of the self for public/private and networked consumption than traditional media's effort to embody their audience in its narratives - the paper reaches for conclusions that identify a more elaborate legitimation crisis looming in our political and cultural worlds.

Discovery of Ordovician-Devonian strata in the south of the Qiangtang area, Tibet

Low-grade metamorphic rocks are exposed extensively in the Qiangtang area, Tibet. There is a great dispute about the age of the strata because of no reliable fossil evidence and other chronological evidence. Cephalopods, crinoids, graptolites and tentaculites fossils are discovered at Tashi Hill north of Gangtang Co. Primary identification indicates that the cephalopod is Sinoceras,Michelinoceras, Wennanoceras, Archigeisonoceras etc. and the crinoid is Monograptus. The Sinoceras-Michelinoceras assemblage is the key fossil assemblage of Mid Ordovician Baotaan age, which reflects the Mid Ordovician aspects. There are several tens of meters of fossil-free clastic rocks below the Mid Ordovician cephalopod-bearing horizon, which are probably Ordovician sediments. The discovery of Ordovician-Devonian biotas and strata provide new important evidence for the stratigraphic division and correlation and the study of the tectonic evolution of the Qiangtang area.

Job strain exposures vs. stress-related workers’ compensation claims in Victoria, Australia: developing a public health response to job stress

We present a comparative analysis of patterns of exposure to job stressors and stress-related workers’ compensation (WC) claims to provide an evaluation of the adequacy of claims-driven policy and practice. We assessed job strain prevalence in a 2003 population-based survey of Victorian [Australia] workers and compared these results with stress-related WC statistics for the same year. Job strain prevalence was higher among females than males, and elevated among lower vs. higher occupational skill levels. In comparison, claims were higher among females than males, but primarily among higher skill-level workers. There was some congruence between exposure and WC claims patterns. Highly exposed groups in lower socio-economic positions were underrepresented in claims statistics, suggesting that the WC insurance perspective substantially underestimates the job stress problems for these groups. Thus to provide a sufficient evidence base for equitable policy and practice responses to this growing public health problem, exposure or health outcome data are needed as an essential complement to claims statistics.

Strain gradients in Cu-Fe thin films and multilayers during micropillar compression

Plastic strain gradients can influence the work-hardening behaviour of metals due to the accumulation of geometrically necessary discolations at the micron/submicron scale. A finite element model based on the conventional theory of mechanism-based strain-gradient plasticity has been developed to simulate the micropillar compression of Cu–Fe thin films and multilayers. The modelling results show that the geometric constraints lead to inhomogeneous deformation in the Cu layers, which agrees well with the bulging of Cu layers observed experimentally. Plastic strain gradients develop inside the individual layers, leading to extra work-hardening due to the accumulation of geometrically necessary dislocations. In the multilayer specimens, the Cu layers deform more severely than the Fe layers, resulting in the development of tensile stresses in the Fe layers. It is proposed that these tensile stresses are responsible for the development of micro-cracks in the Fe layers.

Flowering ecology of a Box-Ironbark Eucalyptus community

Box-Ironbark forests occur on the inland hills of the Great Dividing Range in Australia, from western Victoria to southern Queensland. These dry, open forests are characteristically dominated by Eucalyptus species such as Red Ironbark E. tricarpa, Mugga Ironbark E. sideroxylon and Grey Box E. microcarpa. Within these forests, several Eucalyptus species are a major source of nectar for the blossom-feeding birds and marsupials that form a distinctive component of the fauna. In Victoria, approximately 83% of the original pre - European forests of the Box-Ironbark region have been cleared, and the remaining fragmented forests have been heavily exploited for gold and timber. This exploitation has lead to a change in the structure of these forests, from one dominated by large 80-100 cm diameter, widely -spaced trees to mostly small (≥40 cm DBH), more densely - spaced trees. This thesis examines the flowering ecology of seven Eucalyptus species within a Box-Ironbark community. These species are characteristic of Victorian Box-Ironbark forests; River Red Gum E. camaldulensis, Yellow Gum E. leucoxylon, Red Stringybark E. macrorhyncha, Yellow Box E. melliodora, Grey Box E. microcarpa, Red Box E. polyanthemos and Red Ironbark E. tricarpa. Specifically, the topics examined in this thesis are: (1) the floral character traits of species, and the extent to which these traits can be associated with syndromes of bird or insect pollination; (2) the timing, frequency, duration, intensity, and synchrony of flowering of populations and individual trees; (3) the factors that may explain variation in flowering patterns of individual trees through examination of the relationships between flowering and tree-specific factors of individually marked trees; (4) the influence of tree size on the flowering patterns of individually marked trees, and (5) the spatial and temporal distribution of the floral resources of a dominant species, E. tricarpa. The results are discussed in relation to the evolutionary processes that may have lead to the flowering patterns, and the likely effects of these flowering patterns on blossom-feeding fauna of the Box-Ironbark region. Flowering observations were made for approximately 100 individually marked trees for each species (a total of 754 trees). The flower cover of each tree was assessed at a mean interval of 22 (+ 0.6) days for three years; 1997, 1998 and 1999. The seven species of eucalypt each had characteristic flowering seasons, the timing of which was similar each year. In particular, the timing of peak flowering intensity was consistent between years. Other spatial and temporal aspects of flowering patterns for each species, including the percentage of trees that flowered, frequency of flowering, intensity of flowering and duration of flowering, displayed significant variation between years, between forest stands (sites) and between individual trees within sites. All seven species displayed similar trends in flowering phenology over the study, such that 1997 was a relatively 'poor' flowering year, 1998 a 'good' year and 1999 an 'average' year in this study area. The floral character traits and flowering seasons of the seven Eucalyptus species suggest that each species has traits that can be broadly associated with particular pollinator types. Differences between species in floral traits were most apparent between 'summer' and 'winter' flowering species. Winter - flowering species displayed pollination syndromes associated with bird pollination and summer -flowering species displayed syndromes more associated with insect pollination. Winter - flowering E. tricarpa and E. leucoxylon flowers, for example, were significantly larger, and contained significantly greater volumes of nectar, than those of the summer flowering species, such as E. camaldulensis and E. melliodom. An examination of environmental and tree-specific factors was undertaken to investigate relationships between flowering patterns of individually marked trees of E. microcarpa and E. tricarpa and a range of measures that may influence the observed patterns. A positive association with tree-size was the most consistent explanatory variable for variation between trees in the frequency and intensity of flowering. Competition from near-neighbours, tree health and the number of shrubs within the canopy area were also explanatory variables. The relationship between tree size and flowering phenology was further examined by using the marked trees of all seven species, selected to represent five size-classes. Larger trees (≥40 cm DBH) flowered more frequently, more intensely, and for a greater duration than smaller trees. Larger trees provide more abundant floral resources than smaller trees because they have more flowers per unit area of canopy, they have larger canopies in which more flowers can be supported, and they provide a greater abundance of floral resources over the duration of the flowering season. Heterogeneity in the distribution of floral resources was further highlighted by the study of flowering patterns of E. tricarpa at several spatial and temporal scales. A total of approximately 5,500 trees of different size classes were sampled for flower cover along transects in major forest blocks at each of five sample dates. The abundance of flowers varied between forest blocks, between transects and among tree size - classes. Nectar volumes in flowers of E. tricarpa were sampled. The volume of nectar varied significantly among flowers, between trees, and between forest stands. Mean nectar volume per flower was similar on each sample date. The study of large numbers of individual trees for each of seven species was useful in obtaining quantitative data on flowering patterns of species' populations and individual trees. The timing of flowering for a species is likely to be a result of evolutionary selective forces tempered by environmental conditions. The seven species' populations showed a similar pattern in the frequency and intensity of flowering between years (e.g. 1998 was a 'good' year for most species) suggesting that there is some underlying environmental influence acting on these aspects of flowering. For individual trees, the timing of flowering may be influenced by tree-specific factors that affect the ability of each tree to access soil moisture and nutrients. In turn, local weather patterns, edaphic and biotic associations are likely to influence the available soil moisture. The relationships between the timing of flowering and environmental conditions are likely to be complex. There was no evidence that competition for pollinators has a strong selective influence on the timing of flowering. However, as there is year-round flowering in this community, particular types of pollinators may be differentiated along a temporal gradient (e.g. insects in summer, birds in winter). This type of differentiation may have resulted in the co-evolution of floral traits and pollinator types, with flowers displaying adaptations that match the morphologies and energy requirements of the most abundant pollinators in any particular season. Spatial variation in flowering patterns was evident at several levels. This is likely to occur because of variation in climate, weather patterns, soil types, degrees of disturbance and biotic associations, which vary across the Box-Ironbark region. There was no consistency among sites between years in flowering patterns suggesting that factors affecting flowering at this level are complex. Blossom-feeding animals are confronted with a highly spatially and temporally patchy resource. This patchiness has been increased with human exploitation of these forests leading to a much greater abundance of small trees and fewer large trees. Blossom-feeding birds are likely to respond to this variation in different ways, depending upon diet-breadth, mobility and morphological and behavioural characteristics. Future conservation of the blossom-feeding fauna of Box-Ironbark forests would benefit from the retention of a greater number of large trees, the protection and enhancement of existing remnants, and revegetation with key species, such as E. leucoxylon, E. microcarpa and E. tricarpa. The selective clearing of summer flowering species, which occur on the more fertile areas, may have negatively affected the year-round abundance and distribution of floral resources. The unpredictability of the spatial distribution of flowering patches within the region means that all remnants are likely to be important foraging areas in some years.

Understanding drivers and barriers : the key to water use behaviour change

In southwest Victoria, like many other regions in Australia, drought, climate change and population growth have exposed gaps in water supply. To develop effective demand management strategies for rural and regional areas, this paper investigates the drivers and barriers to water saving in southwest Victoria. Although the majority of people felt water saving was important, the drivers for water saving differed between different groups. Residential users were saving water for altruistic reasons, while for farmers the drivers were farm viability and productivity. Although the barriers differed between property types, common barriers included lack of understanding of the impact their water use has on supplies, lack of knowledge, the pricing system and distrust of the water authority. The findings provide information for effective demand management strategies for the region.

Spectral element model updating for damage identification using clonal selection algorithm

A spectral element model updating procedure is presented to identify damage in a structure using Guided wave propagation results. Two damage spectral elements (DSE1 and DSE2) are developed to model the local (cracks in reinforcement bar) and global (debonding between reinforcement bar and concrete) damage in one-dimensional homogeneous and composite waveguide, respectively. Transfer matrix method is adopted to assemble the stiffness matrix of multiple spectral elements. In order to solve the inverse problem, clonal selection algorithm is used for the optimization calculations. Two displacement-based functions and two frequency-based functions are used as objective functions in this study. Numerical simulations of wave propagation in a bare steel bar and in a reinforcement bar without and with various assumed damage scenarios are carried out. Numerically simulated data are then used to identify local and global damage of the steel rebar and the concrete-steel interface using the proposed method. Results show that local damage is easy to be identified by using any considered objective function with the proposed method while only using the wavelet energy-based objective function gives reliable identification of global damage. The method is then extended to identify multiple damages in a structure. To further verify the proposed method, experiments of wave propagation in a rectangular steel bar before and after damage are conducted. The proposed method is used to update the structural model for damage identification. The results demonstrate the capability of the proposed method in identifying cracks in steel bars based on measured wave propagation data.

Short- and long-term consequences of early developmental conditions : a case study on wild and domesticated zebra finches

Divergent selection pressures among populations can result not only in significant differentiation in morphology, physiology and behaviour, but also in how these traits are related to each other, thereby driving the processes of local adaptation and speciation. In the Australian zebra finch, we investigated whether domesticated stock, bred in captivity over tens of generations, differ in their response to a life-history manipulation, compared to birds taken directly from the wild. In a ‘common aviary’ experiment, we thereto experimentally manipulated the environmental conditions experienced by nestlings early in life by means of a brood size manipulation, and subsequently assessed its short- and long-term consequences on growth, ornamentation, immune function and reproduction. As expected, we found that early environmental conditions had a marked effect on both short- and long-term morphological and life-history traits in all birds. However, although there were pronounced differences between wild and domesticated birds with respect to the absolute expression of many of these traits, which are indicative of the different selection pressures wild and domesticated birds were exposed to in the recent past, manipulated rearing conditions affected morphology and ornamentation of wild and domesticated finches in a very similar way. This suggests that despite significant differentiation between wild and domesticated birds, selection has not altered the relationships among traits. Thus, life-history strategies and investment trade-offs may be relatively stable and not easily altered by selection. This is a reassuring finding in the light of the widespread use of domesticated birds in studies of life-history evolution and sexual selection, and suggests that adaptive explanations may be legitimate when referring to captive bird studies.