Cadmium, copper, mercury, and zinc concentrations in tissues of the King Crab (Pseudocarcinus gigas) from southeast Australian waters

The concentrations of cadmium, copper, mercury, and zinc were determined in muscle (body, claw, and leg), hepatopancreas, and gill tissues of Pseudocarcinus gigas, an exceptionally large, long-lived, and deep-dwelling crab species. The accumulation patterns observed are discussed in terms of both intra- and interspecies variations, with particular attention to the possible consequences of the extreme size and depth range of P. gigas. Metal concentrations did not depend significantly on sex of the crab. Significant differences between tissues were detected for all metals, and the distribution of metal between the tissues was different for each metal. Significant correlations were found between metal concentrations in the various tissues and crab size, and these are discussed and rationalised. The concentrations of mercury and zinc in muscle tissue increased with crab size and were high compared to other crab species. The concentrations of cadmium and copper present in edible tissues were not especially high compared to other crab species, but the concentration of cadmium in the hepatopancreas is of dietary concern.

Cross-discipline collaboration and innovation in the design studio : drawing on the Bath model

As information expands and comprehension becomes more complex, so the need increases to develop focused areas of knowledge and skill acquisition. However, as the number of specialty areas increases so the languages that define each separate knowledge base become increasingly remote. Hence, concepts and viewpoints that were once considered part of a whole become detached. This phenomenon is typical of the development of tertiary education, especially within professional oriented courses, where disciplines and sub-disciplines have grown further apart and the ability to communicate has become increasingly fragmented.
One individual and visionary who was well acquainted with the shortcomings of the piecemeal development between the disciplines was Professor Sir Edmond Happold, the leader of the prestigious group known as Structures 3 at Ove Arup and Partners, who were responsible for making happen some of the landmark buildings of their time, including Sydney Opera House and the Pompidou Centre, and the founding professor of the Bath school of Architecture and Civil Engineering in 1975. While still having a profound respect for the knowledge bases of the different professions within the building and construction industry, Professor Happold was also well aware of the extraordinary synergies in design and innovation which could come about when the disciplines of Architecture and Civil Engineering were brought together at the outset of the design process.
This paper discusses the rational behind Professor Happold’s cross-discipline model of education and reflects on the method, execution and pedagogical worth of the joint studio-based projects which formed a core aspect of the third year program at the School of Architecture and Civil Engineering at the Bath University.

Structural characterization of rare intramolecularly (1,4-Te· · ·N) bonded diorganotellurides and their monomeric complexes with mercury(II) halides: metal assisted C-H· · ·X (Hg) interactions leading to supramolecular architecture

Monomeric tellurides 4-RC₆H₄(SB)Te [SB = 2-(4,4'-N0₂C₆H₄CH=NC₆H₃-Me); R = H, 1a; Me,1b; OMe, 1c], which incidentally represent the first example of a telluride with 1,4-Te···N intramolecular interaction, have been prepared and characterized by solution and solid-state ¹²⁵Te NMR, ¹³C NMR and X-ray crystallography. Interplay of weak C-H···O and C-H-··π{ interactions in the crystal lattice of 1b and1c are responsible for the formation of supramolecular motifs. These tellurides undergo expected oxidative addition reactions with halogens and interhalogens and also interact coordinatively with mercury(II) halides to give 1:2 complexes, HgX₂[4-RC₆H₄(SB)Te]₂ (X = CI, R = H, 2a; Me, 2b; OMe, 2c and X = Br, R = H, 3a; Me, 3b; and OMe, 3c) with no sign of Te-C bond cleavage, as has been reported for some 1,5-Te·· ·N(O) intramolecularly bonded tellurides. The complexes 2a and 3c are the first structurally characterized monomeric 1:2 adducts of mercury(II) halides with Te ligands. The 1,4-Te···N intramolecular interactions in the solid-state are retained in the complexes highlighting simultaneously the Lewis acid and base character of the Te(lI) atom. Packing of molecules in the crystal lattice of 2a
and 3c reveals that non-covalent C-H· . ·Cl/Br interactions involving metal-bound halogen atoms possess significant directionality and in
combination with coordinative covalent interactions may be of potential use in creating inorganic supramolecular synthons.

One-bath union dyeing of wool/polytrimethylene terephthalate blends

The one-bath dyeing of blends of polytrimethylene terephthalate (PTT) staple and wool has been investigated. The exhaustion of selected Terasil disperse dyes on PTT fibre and Lanasol reactive dyes on wool was measured as a function of temperature, together with the cross-staining of the Terasil dyes on the wool component and the Lanasol dyes on PTT component. Most Terasil disperse dyes achieved satisfactory dye uptake on PTT at 110 °C, whereas on conventional polyester (polyethylene terephthalate) temperatures of up to 130 °C are required. An optimised union-dyeing technique for wool/PTT blends was developed which minimised the staining of Terasil disperse dyes on wool and produced dyed goods with high levels of wet colour fastness. Carriers were not required to enhance the dyeability of PTT at low temperatures. The wool component appeared to be protected against damage at 110 °C by the reactive dyes. The results indicate the potential for blending PTT fibre and wool to produce fabrics that are easier to dye at lower temperatures than conventional wool/polyester blends.

Associations of maternal long-chain polyunsaturated fatty acids, methyl mercury, and infant development in the Seychelles Child Development Nutrition Study

Fish consumption during gestation can provide the fetus with long-chain polyunsaturated fatty acids (LCPUFA) and other nutrients essential for growth and development of the brain. However, fish consumption also exposes the fetus to the neurotoxicant, methyl mercury (MeHg). We studied the association between these fetal exposures and early child development in the Seychelles Child Development Nutrition Study (SCDNS). Specifically, we examined a priori models of Ω-3 and Ω-6 LCPUFA measures in maternal serum to test the hypothesis that these LCPUFA families before or after adjusting for prenatal MeHg exposure would reveal associations with child development assessed by the BSID-II at ages 9 and 30 months. There were 229 children with complete outcome and covariate data available for analysis. At 9 months, the PDI was positively associated with total Ω-3 LCPUFA and negatively associated with the ratio of Ω-6/Ω-3 LCPUFA. These associations were stronger in models adjusted for prenatal MeHg exposure. Secondary models suggested that the MeHg effect at 9 months varied by the ratio of Ω-6/Ω-3 LCPUFA. There were no significant associations between LCPUFA measures and the PDI at 30 months. There were significant adverse associations, however, between prenatal MeHg and the 30-month PDI when the LCPUFA measures were included in the regression analysis. The BSID-II mental developmental index (MDI) was not associated with any exposure variable. These data support the potential importance to child development of prenatal availability of Ω-3 LCPUFA present in fish and of LCPUFA in the overall diet. Furthermore, they indicate that the beneficial effects of LCPUFA can obscure the determination of adverse effects of prenatal MeHg exposure in longitudinal observational studies.

Evidence of changes in membrane pore characteristics due to filtration of dye bath liquors

This study was carried out to investigate the treatment of various salt solutions and synthetic dye bath liquors by nanofiltration using Nanomax-50 membrane in a stirred cell with 150 mL working volume. Donnan exclusion was compared by filtering salts with monovalent and divalent cations and anions. This was done by comparing three salts including sodium chloride (NaCl), calcium chloride (CaCl2) and sodium sulphate (Na2SO4). The rejection order determined was Na2SO4>NaCl>CaCl2 which is typical of a negatively charged membrane where Donnan and steric exclusion play an important role in separation. Studies on the flux and rejection characteristics of sodium sulphate were undertaken for concentrations ranging from 10 to 40 gl−1 thereby replicating actual dye bath salt concentrations. Synthetic dye bath liquors were prepared using acidic dye (Acid Green 25) at a fixed concentration of 100 mgl−1 with 10 and 15 gl−1 of sodium sulphate solutions. While, the results showed evidence of flux decline due to increased resistance and decreased transmembrane pressure, pore enlargement occurred after the filtration experiments with sodium sulphate solutions greater than 20 gl−1. Pore enlargement was even more prominent in the two synthetic dye bath liquors filtered. Pore enlargement was determined by observing the pure water flux before and after filtering sodium sulphate solutions or dye bath liquors. An increase in pore diameter of 58 and 94 %was estimated when dye bath liquors containing 10 and 15 gl−1 of sodium sulphate, respectively were filtered through the membrane. The following equation was derived in estimating the pore enlargement, where de1 and de2 are the apparent diameter of membrane pore sizes before and after filtration of salt solutions or dye bath liquors and Rm1 and Rm2 are the membrane resistance of pure water flux before and after filtration of salt solutions or dye bath liquors. These results have important implications for the application of nanofiltration technology to textile wastewater treatment and reuse.

Electrowetting measurements with mercury showing mercury/mica interfacial energy depends on charging

We demonstrate that the interfacial energy between mercury and mica is a function of charge on the mercury surface, decreasing with increasing positive charge. The contact angle of mercury on mica has been measured as a function of potential applied to the mercury, which forms the working electrode of a cell containing either KC1 or NaF electrolyte solution. At high negative applied potentials, a stable aqueous film exists between the mercury and mica surface. As potential is made less negative, the film collapses and mercury partial1 wets the mica at a critical potential, close to the electrocapillary maximum. Upon increasing the potential further (making the Hg surface more and more positive), the contact angle measured within the mercury continually decreases. Electrowetting with mercury is not unexpected since its interfacial tension with the aqueous phase is known to be a function of applied potential. However, the observed decrease goes against the trend expected from the Young equation if only this effect is considered. To explain the data we must allow the mercury/mica interfacial tension also to vary with applied potential. This variation indicates that the mercury surface is positively charged by contact with mica, consistent with known contact electrification between these two materials. The inherent charges at the mercury interfaces with mica and electrolyte solution result in contact angle changes of some tens of degrees with a change in applied potential of half a volt orders of magnitude less than the potentials required to effect comparable changes in other electrowetting systems.

Self-assembled monolayers on mercury probed with a modified surface force apparatus

Self-assembled monolayers (SAMs) of three thiol compounds formed on mercury are investigated by a combination of cyclic voltammetry, electrocapillary curves, and a novel method of measuring electrical doublelayer properties. The last method involves a modified surface force apparatus in which a flat mica surface is pressed down toward a fixed mercury drop held beneath it, while both are immersed in aqueous electrolyte solution. Optical interference measurements are made of the mica-mercury separation as a function of electrical potential applied to the mercury, which yields information on the double-layer interaction between the two surfaces. Mercury is decorated by SAMs of 11-mercapto-1-undecanoic acid, which is shown to bring negative charge to the mercury/aqueous interface due to dissociation of the carboxylic acid groups; 11-mercapto-1- undecanol, which although it is uncharged changes the dipole potential of the interface; and 1-undecanethiol, which likewise changes the dipole potential, but by a different amount. The difference between the changes in dipole potential (90 mV) can be related to the different terminal groups of these two SAMs, -CH3 compared to -OH, that are in contact with the aqueous phase.

Measurement of aqueous film thickness between charged mercury and mica surfaces : a direct experimental probe of the Poisson-Boltzmann distribution

A stable aqueous electrolyte film is formed between a mercury drop and a flat mica surface due to electrical double-layer repulsion when a negative potential is applied to the mercury. Film thickness has been measured as a function of applied potential while keeping the film pressure constant. By making measurements in this way, it is possible to map the data directly according to the Poisson-Boltzmann equation. An excellent fit to the data is obtained, providing direct evidence for this classical equation and its use as the basis of the Gouy-Chapman model of the diffuse double layer in electrolyte solutions.

Mercury in vaccines from the Australian childhood immunization program schedule

Despite the removal of the mercury (Hg)-based preservative thimerosal from vaccines listed on the Australian Immunization Program Schedule for children, concerns remain among some researchers and parents for the safety of the present schedule, in part due to a fear of residual trace levels of Hg. The purpose of this study was to independently assess childhood vaccines for the presence of Hg. Eight vaccines administered to children under the age of 5 yr were assessed for Hg content via a DMA-80 direct mercury analyzer. Seven of the 8 vaccines contained no detectable levels of Hg (less than 1 ppb); however, 1 vaccine (Infanrix hexa) tested positive for Hg at 10 ppb. The result was confirmed and validated by retesting the original sample. Follow-up testing was conducted on three additional samples of Infanrix hexa (one from the same production lot and two from a different lot). All three tested positive for Hg (average of 9.7 ppb). Although the levels of Hg detected are substantially lower than any established exposure safety limits, the results of this study reveal that inaccuracies exist in public health messages, professional communications, and official documentation regarding Hg content in at least one childhood vaccine. In the interests of public health, it is incumbent on vaccine manufacturers and responsible agencies such as the Therapeutic Goods Administration and the Federal Department of Health and Ageing to address this issue as a matter of urgency.