Performance differences between entrepreneurial and non-entrepreneurial firms : extending the strategy-structure-performance paradigm

This paper extends the strategy-structure-performance paradigm to examine the performance differences between entrepreneurial and non-entrepreneurial electrical distribution firms. The results indicate that both entrepreneurial and non-entrepreneurial electrical distributors with an optimal strategy-structure alignment tend to have a higher organizational performance than those entrepreneurial and non-entrepreneurial electrical distributors without such an alignment. The results are examined and conclusions are offered. Finally, the implications for future research are set out, as are the limitations of the present study.

Disproportionate ownership structure and IPO long-run performance of non-SOEs in China

This paper examines the relationship between ownership structures and IPO long-run performance of non-SOEs in China. Although non-SOEs underperform the market in general after IPO but the poor performance is mainly caused by the IPOs with ownership control wedge. Non-SOEs with one share one vote structure outperform those with control-ownership wedge by 30% for three years post-IPO performance in adjusted buy-and-hold returns. Non-SOEs with control-ownership wedge have higher frequency of undertaking value-destroying related party transactions. These findings suggest that non-SOEs need to improve corporate governance such as disproportionate ownership structure to better safeguard the interest of long-run shareholders.

Separation of longitudinal and flexural wave in a cylindrical structure based on sensor arrangement for non-destructive evaluation

Low strain integrity testing is commonly used to assess the in situ condition of the poles or piles. For poles, it is important to calculate the embedment length and location of damage which is highly influenced by the accurate determination of the wave velocity. In general, depending on impact location and orientation, both longitudinal and bending waves may generate inside the pole, and these two waves have very distinct characteristics and wave velocity. These differences are even more prominent in the low frequency which is usually induced in the low strain non-destructive testing. Consequently, it will be useful if these two waves can be separated for the condition assessment of the poles. In this paper, a numerical analysis is performed on a pole considering that both waves are generated, and a method is proposed to differentiate these two waves based on an appropriate sensor arrangement that includes the location and the orientation of the sensors. Continuous wavelet transform is applied on the numerical signal to calculate the phase velocity of the waves and compared with analytical phase velocity curves. From the results, it can be seen that appropriate location and orientation of the sensors can separate the longitudinal and flexural waves as they match significantly well with the corresponding analytical phase velocity curves of these two waves.

Chemical structure based prediction of PAN and oxidized PAN fiber density through a non-linear mathematical model

The production of carbon fiber, particularly the oxidation/stabilization step, is a complex process. In the present study, a non-linear mathematical model has been developed for the prediction of density of polyacrylonitrile (PAN) and oxidized PAN fiber (OPF), as a key physical property for various applications, such as energy and material optimization, modeling, and design of the stabilization process. The model is based on the available functional groups in PAN and OPF. Expected functional groups, including [Formula presented], [Formula presented], –CH2, [Formula presented], and [Formula presented], were identified and quantified through the full deconvolution analysis of Fourier transform infrared attenuated total reflectance (FT-IR ATR) spectra obtained from fibers. These functional groups form the basis of three stabilization rendering parameters, representing the cyclization, dehydrogenation and oxidation reactions that occur during PAN stabilization, and are used as the independent variables of the non-linear predictive model. The k-fold cross validation approach, with k = 10, has been employed to find the coefficients of the model. This model estimates the density of PAN and OPF independent of operational parameters and can be expanded to all operational parameters. Statistical analysis revealed good agreement between the governing model and experiments. The maximum relative error was less than 1% for the present model.

Do cell-autonomous and non-cell-autonomous effects drive the structure of tumor ecosystems?

By definition, a driver mutation confers a growth advantage to the cancer cell in which it occurs, while a passenger mutation does not: the former is usually considered as the engine of cancer progression, while the latter is not. Actually, the effects of a given mutation depend on the genetic background of the cell in which it appears, thus can differ in the subclones that form a tumor. In addition to cell-autonomous effects generated by the mutations, non-cell-autonomous effects shape the phenotype of a cancer cell. Here, we review the evidence that a network of biological interactions between subclones drives cancer cell adaptation and amplifies intra-tumor heterogeneity. Integrating the role of mutations in tumor ecosystems generates innovative strategies targeting the tumor ecosystem's weaknesses to improve cancer treatment.

A new method for locating the global optimum : application of the cutting angle method to molecular structure prediction

Many problems in chemistry depend on the ability to identify the global minimum or maximum of a function. Examples include applications in chemometrics, optimization of reaction or operating conditions, and non-linear least-squares analysis. This paper presents the results of the application of a new method of deterministic global optimization, called the cutting angle method (CAM), as applied to the prediction of molecular geometries. CAM is shown to be competitive with other global optimization techniques for several benchmark molecular conformation problem. CAM is a general method that can also be applied to other computational problems involving global minima, global maxima or finding the roots of nonlinear equations.

Non-quantized minimum free energy in untranslated region exons

In an attempt to improve automated gene prediction in the untranslated region of a gene, we completed an in-depth analysis of the minimum free energy for 8,689 sub-genetic DNA sequences. We expanded Zhang's classification model and classified each sub-genetic sequence into one of 27 possible motifs. We calculated the minimum free energy for each motif to explore statistical features that correlate to biologically relevant sub-genetic sequences. If biologically relevant sub-genetic sequences fall into distinct free energy quanta it may be possible to characterize a motif based on its minimum free energy. Proper characterization of motifs can lead to greater understanding in automated genefinding, gene variability and the role DNA structure plays in gene network regulation.

Our analysis determined: (1) the average free energy value for exons, introns and other biologically relevant sub-genetic sequences, (2) that these subsequences do not exist in distinct energy quanta, (3) that introns exist however in a tightly coupled average minimum free energy quantum compared to all other biologically relevant sub-genetic sequence types, (4) that single exon genes demonstrate a higher stability than exons which span the entire coding sequence as part of a multi-exon gene and (5) that all motif types contain a free energy global minimum at approximately nucleotide position 1,000 before reaching a plateau. These results should be relevant to the biochemist and bioinformatician seeking to understand the relationship between sub-genetic sequences and the information behind them.

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (y=H (1a), Me (1b), MeO (1c)) can be prepared
either by direct insertion of elemental Te across CRf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (y = H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCh (y = H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a--c with S0₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂Teh (y = H
(4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of la--c with KI, or alternatively, by the oxidative addition of
iodine to 2a--c. The reaction of 2a--c with allyl bromide affords the diorganotellurium dibrornides la--c, rather than the expected
triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ^l3C and ¹²⁵Te
NMR spectroscopy (solution and solid-state) and in case of Ie also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.

Non-invasive sampling techniques : applications for mapping the generic variation of powerful owls

The Powerful Owl (Ninox strenua) is endemic to Australia, being resident in the three eastern mainland states and the Australian Capital Territory. It is classified nationally as of conservation significance and vulnerable in the state of Victoria. The elusive nature of this owl, along with its dispersed distribution, low population density and difficulty in identifying individual birds, limit the collection of ecological data. Molecular methods can be used to obtain crucial ecological information, essential for Powerful Owl conservation.

Non-invasive sampling is a relatively new method used for obtaining genetic material from free-ranging animals. This type of sampling however, is generally overlooked as a potential DNA source. Shed hair and feathers, faeces, urine, skins and eggshells are all potential sources of DNA. Non-invasive sampling regimes may be the only alternative for the genetic analysis of endangered and/or elusive species that are difficult to sample otherwise.

Powerful Owls moult annually. Shed feathers therefore, can be collected from under roost trees and used for genetic analysis. Feathers collected provide DNA that is unique to the individual and can provide additional ecological knowledge of the species.

In this study we collected shed Powerful Owl feathers during 2003 and 2004. In order to obtain samples from across the owl's large distribution, public awareness about the project via the way of flyers, mail-outs, media sources (radio, newspapers and magazines), email lists and public seminars was initiated. Overall, the collection strategy was very successful with over 500 Powerful Owl feather samples being collected.

Genetic information obtained from the analysis of DNA from feathers can enable a more rigorous assessment of population viability of the Powerful Owl. Specifically designed molecular markers will facilitate unequivocal identification of individual birds ("DNA fingerprinting"). Through the application of molecular techniques we can collect ecological information about the Powerful Owl such as, genetic divergence, population structure, dispersal patterns, migration and inbreeding. These questions can not be addressed via traditional data collection and will contribute significantly to the successful conservation of the Powerful Owl and potentially other raptor species.

The pragmatics of text facilitation : the study of academic English of native and non-native writers

In this paper I describe the discursive strategies related to the writer–reader textual reciprocity. I focus on one way of achieving such reciprocity -- the employment by the writer of facilitative schematic structures and metalanguage where one text segment signposts information conveyed in the segment that follows. I refer to these facilitative schematic structures as "organising relational schemata". I see organising relations as the most explicit components of the rhetorical structure of texts: they illuminate the main message and aid the reader's cognitive processes in the orientation of how information is conveyed by text.
This paper discusses the way the choices of organising relations and associated metalanguage by the writers in different cultures and different discourse communities contribute to the communicative homeostasis in the world of text. It shows how the influence of a native culture and intellectual style together with the forces operating within the writer's international disciplinary community interact in the authorial guidance in the scholarly prose.
I introduce and exemplify three types of organising relational structures: Advance Organisers, Introducers and Enumerators. I trace the utilisation of these three types of relations in sociology research papers written in English and produced in "Anglo" and Polish academic discourse comunities by native English speaking and native Polish speaking scholars. The relational typology adopted is based on a study by Golebiowski (2002), which proposed a theoretical framework for the examination of discoursal structure of research papers, referred to as FARS – Framework for the Analysis of the Rhetorical Structure of Texts. FARS entails a relational taxonomy which displays a pattern of rhetorical relations utilised by the writer to achieve textual coherence.
I describe intertextual differences in the frequency of occurrence of organising relations, their degree of explicitness and their positioning in the hierarchical structure of texts. Differences in the mode of employment of textual organisers suggest that the rhetorical structure of English research prose produced by non-native speakers cannot escape being shaped by the characteristics and conventions of the authors’ first language. They are also attributed to cultural norms and conventions as well as educational systems prevailing within the discourse communities which constitute the social contexts of texts.

The effects of clustered data on standard error estimates in covariance structure analysis : a field data application

Purpose – The purpose of this article is to present an empirical analysis of complex sample data with regard to the biasing effect of non-independence of observations on standard error parameter estimates. Using field data structured in the form of repeated measurements it is to be shown, in a two-factor confirmatory factor analysis model, how the bias in SE can be derived when the non-independence is ignored.

Design/methodology/approach – Three estimation procedures are compared: normal asymptotic theory (maximum likelihood); non-parametric standard error estimation (naïve bootstrap); and sandwich (robust covariance matrix) estimation (pseudo-maximum likelihood).

Findings – The study reveals that, when using either normal asymptotic theory or non-parametric standard error estimation, the SE bias produced by the non-independence of observations can be noteworthy.

Research limitations/implications – Considering the methodological constraints in employing field data, the three analyses examined must be interpreted independently and as a result taxonomic generalisations are limited. However, the study still provides “case study” evidence suggesting the existence of the relationship between non-independence of observations and standard error bias estimates.

Originality/value – Given the increasing popularity of structural equation models in the social sciences and in particular in the marketing discipline, the paper provides a theoretical and practical insight into how to treat repeated measures and clustered data in general, adding to previous methodological research. Some conclusions and suggestions for researchers who make use of partial least squares modelling are also drawn.

Revisiting capital structure theory : a test of pecking order and static order trade-of model from Malaysian capital market

This study revisits the capital structure theory and test Pecking Order Hypothesis (POH) and Static Order Trade-off theory (STOT) using Malaysian Listed firms over a period from 1999 to 2002. The evidence from pecking order model suggests that the internal fund deficiency is the most important determinant that possibly explains the issuance of new debt in Malaysian capital market despite the lower predicting power.  While static trade off-model is not fit to explain the issuance of new debt issue in Malaysian capital market. This is an interesting findings that confirm the fact that Malaysian firms do not too much care about tax-shield benefit derive from employ both debt and non-debt tax-shield. The finn's size, which is used to neutralize the size effect, appears to provide some explanation for the variation in its capital structure policy choice; however asset structure and growth no evidence of static-order-trade-off is observed in Malaysian capital market.

Bis(3-endo-camphoryl)phosphinic acid, a non-racemic helical supramolecular host with aquapores

Bis(3-endo-camphoryl)phosphinic acid (1) was prepared by the reaction of the lithium enolate of D-(+)-camphor and phosphorous trichloride followed by an oxidative work up. Compound 1 crystallizes from wet toluene as monohydrate 1·H2O, which was investigated by X-ray crystallography. Molecules of 1 are associated by strong hydrogen bonds giving rise to the formation of a supramolecular helix. The interior channel of the helix is filled by a one-dimensional (1D) string of water molecules that are also associated by hydrogen bonding. The 1D string adopts a twisted zigzag conformation. Although the hydrogen bond networks are not cross-linked both the screw of the helix and the twist of the 1D string of water molecules are left-handed (M) and controlled by the chiral camphoryl residues situated on the exterior of the helix. The overall supramolecular structure is strongly reminiscent of aquaporin-1, a significant membrane-channel protein responsible for the transport of water into the cells.

The Australian class structure and Australian politics 1931 - 40

This paper presents the results of an analysis of the class structure of interwar Australia based largely on the 1933 Commonwealth census. It reviews previous analyses by academics but although contemporary journalists and political strategists. It develops an estimate of the class composition of the electorate as distinct from the general population and attempts to define the class position of voters outside of the paid workforce. It considers the question of to what extent Labor needed non-working-class votes to secure an electoral majority and how the differing social composition of the Australian states impacted on electoral outcomes and Labor strategies. It employs the method of bounds to develop some preliminary conclusions about the electoral behaviour of different social groups and concludes with some observations on the divided nature of the Australian working class and the competing strategies that parties developed in their search for an electoral majority.