Distinguishing between slip and twinning events during nanoindentation of magnesium alloy AZ31

Nanoindentation was performed in selected grain orientations close to [. 112-0] and [. 101-0] in magnesium alloy Mg-3Al-1Zn. The atomic force microscopy (AFM) and electron backscatter diffraction (EBSD) were used to examine the nanoindentation imprint. Two critical events, yielding and pop-in were observed in the depth-load curves. Slip trace analysis suggests that basal slip is responsible for yielding. The following pop-in events at higher loads are associated with the appearance {. 101-2} twins on the surface. The critical resolved shear stress (CRSS) was estimated to be in the range of 220-400. MPa for the initiation of basal slip.

Modeling the tensile behavior of fibers with geometrical and structural irregularities

Virtually all fibers exhibit some dimensional and structural irregularities. These include the conventional textile fibers, the high-performance brittle fibers and even the newly developed nano-fibers. In recent years, we have systematically examined the effect of fiber dimensional irregularities on the mechanical behavior of the irregular fibers. This paper extends our research to include the combined effect of dimensional and structural irregularities, using the finite element method (FEM). The dimensional irregularities are represented by sine waves with a 30 % magnitude of diameter variation while the structural irregularities are represented by longitudinal and horizontal cavities distributed within the fiber structure. The results indicate that fiber geometrical or dimensional variations have a marked influence on the tensile properties of the fiber. It affects not only the values of the breaking load and extension, but also the shape of the load-extension curves. The fiber structural irregularities simulated in this study appear to have little effect on the shape of the load-extension curves.

Modeling the tensile behavior of fiber bundles with irregular constituent fibers

In this paper, the effect of fiber dimensional irregularities on the tensile behavior of fiber bundles is modeled, using the finite element method (FEM). Fiber dimensional irregularities are simulated with sine waves of different magnitude. The specific stress-strain curves of fiber bundles and the constituent single fibers are obtained and compared. The results indicate that fiber diameter irregularity along fiber length has a significant effect on the tensile behavior of the fiber bundle. For a bundle of uniform fibers of different diameters, all constituent fibers will break simultaneously regardless of the fiber diameter. Similarly, if fibers within a bundle have the same pattern and level of diameter irregularity along fiber length, the fibers will break at the same time also regardless of the difference in average diameter of each fiber. In these cases, the specific stress and strain curve for the bundle overlaps with that of the constituent fibers. When the fiber bundle consists of single fibers with different levels of diameter irregularity, the specific stress-strain and load-elongation curves of the fiber bundle exhibit a stepped or “ladder” shape. The fiber with the highest irregularity breaks first, even when the thinnest section of the fiber is still coarser than the diameter of a very thin but uniform fiber in the bundle. This study suggests that fiber diameter irregularity along fiber length is a more important factor than the fiber diameter itself in determining the tensile behavior of a fiber bundle consisting of irregular fibers.

Multi-temporal land use mapping using remotely sensed techniques and the integration of a pollutant load model in a GIS

Estimation of nutrient load production based on multi-temporal remotely sensed land-use data for the Glenelg-Hopkins region in southwest Victoria, Australia, is discussed. Changes in land use were mapped using archived Landsat data and computerized classification techniques. Land-use
change is unparalleled in recent history, with 13% of the region transformed in the last decade. Total nitrogen and phosphorus loading were estimated using an export coefficient model. The analysis demonstrated a disturbing increase in nitrogen and phosphorus loadings from 1995 to 2002. Whilst such increases were suspected from past anecdotal and ad-hoc evidence, our modelling quantitatively estimated such increases and thus demonstrated the enormous potential of using remote sensing and GIS for monitoring land-use change and hence improve land-use management.

A load balancing algorithm for web based server grids

Load balance is a critical issue in distributed systems, such as server grids. In this paper, we propose a Balanced Load Queue (BLQ) model, which combines the queuing theory and hydro-dynamic theory, to model load balance in server grids. Base on the BLQ model, we claim that if the system is in the state of global fairness, then the performance of the whole system is the best. We propose a load balanced algorithm based on the model: the algorithm tries its best to keep the system in the global fairness status using job deviation. We present three strategies: best node, best neighbour, and random selection, for job deviation. A number of experiments are conducted for the comparison of the three strategies, and the results show that the best neighbour strategy is the best among the proposed strategies. Furthermore, the proposed algorithm with best neighbour strategy is better than the traditional round robin algorithm in term of processing delay, and the proposed algorithm needs very limited system information and is robust.

An MPI implementation supported by process migration and load balancing

This report describes an implementation of MPI-1 on the GENESIS cluster operating system and compares this implementation to a UNIX based MPI implementation. The changes that were made to the implementation are compared between the two, and the advantages of porting to GENESIS are detailed. This report demonstrates how GENESIS load balancing supported by process migration improves the execution performance of an MPI application. The significance of this report is in demonstrating how these services can enhance parallel programming tools to improve performance and how future parallel programming tool design could take advantage of these services.

Load balance algorithms for anycast

Increasingly, replicated anycast servers are being used to deliver network applications and service ever increasing user requests. Therefore, the strategies used to guarantee network bandwidth prerequisites and perform load balancing across the nodes of an anycast group are critical to the performance of online applications. In this paper, we model user requests, network congestion and latency, and server load using a combination of hydro-dynamics and queuing theory to develop an efficient job distribution strategy. Current, anycast research does not explicitly consider the system load of nodes within an anycast groups when distributing requests. Therefore, the performance of a heavily loaded anycast system can quickly become congested and uneven as jobs are routed to closely linked nodes which are already saturated with requests. In comparison, the nodes of further away systems remain relatively unused because of other issues such as network bandwidth and latency during these times. Our system redirects requests from busy systems to the idle, remotely linked nodes, to process requests faster in spite of slower network access. Using an empirical study, we show this technique can improve request performance, and throughput with minimal network probing overhead.

Nanofretting behaviors of NiTi shape memory alloy

Nanofretting refers to cyclic movements of contact interfaces with the relative displacement amplitude at the nanometer scale, where the contact area and normal load are usually much smaller than those in fretting. Nanofretting widely exists in microelctromechanical systems (MEMS) and may become a key tribological concern besides microwear and adhesion. With a triboindenter, the nanofretting behaviors of a nickel titanium (NiTi) shape memory alloy are studied under various normal loads (1–10 mN) and tangential displacement amplitudes (2–500 nm) by using a spherical diamond tip. Similar to fretting, the nanofretting of NiTi/diamond pair can also be divided into different regimes upon various shapes of tangential force–displacement curves. The dependence of nanofretting regime on the normal load and the displacement amplitude can be summarized in a running condition nanofretting map. However, due to the surface and size effects, nanofretting operates at some different conditions, such as improved mechanical properties of materials at the nanometer scale, small apparent contact area and single-asperity contact behavior. Consequently, different from fretting, nanofretting was found to exhibit several unique behaviors: (i) the maximum tangential force in one cycle is almost unchanged during a nanofretting test, which is different from a fretting test where the maximum tangential force increases rapidly in the first dozens of cycles; (ii) the tangential stiffness in nanofretting is three orders magnitude smaller than that in fretting; (iii) the friction coefficient in nanofretting is much lower than that in fretting in slip regime; (iv) no obvious damage was observed after 50 cycles of nanofretting under a normal load of 10 mN.

Adaptive load shedding for mining frequent patterns from data streams

Most algorithms that focus on discovering frequent patterns from data streams assumed that the machinery is capable of managing all the incoming transactions without any delay; or without the need to drop transactions. However, this assumption is often impractical due to the inherent characteristics of data stream environments. Especially under high load conditions, there is often a shortage of system resources to process the incoming transactions. This causes unwanted latencies that in turn, affects the applicability of the data mining models produced – which often has a small window of opportunity. We propose a load shedding algorithm to address this issue. The algorithm adaptively detects overload situations and drops transactions from data streams using a probabilistic model. We tested our algorithm on both synthetic and real-life datasets to verify the feasibility of our algorithm.

Load balancing based concurrent execution of NAS parallel benchmarks with BYTE sequential benchmarks on a non-dedicated cluster

Dedicated clusters are becoming commonly used for high performance parallel processing. Computers of a non-dedicated cluster are often idle or lightly loaded. These under utilised computers can be employed to execute parallel applications. Thus, they have to be shared by parallel and sequential applications, which could lead to the improvement of their execution performance. There is a lack of experimental study showing the behaviour and performance of executing parallel and sequential applications concurrently on a non-dedicated cluster. We present the result of an experimental study into load balancing of a mixture of parallel and sequential applications on a non-dedicated cluster.

Tensile behaviour of wool fabric as a function of fabric pH

Wool fabric extensibility under a 5 N/cm load was observed to be greatest at the wool isoelectric point of pH 4.8 and lower at both pH 2.1 and pH 7.2. The impact of pH on fabric extensibility is similar to the variation in fabric hygral expansion previously observed. Fabric stress-strain curves at different pHs show that for a given fabric extension level, the work required to stretch a fabric was less at pH 2.1 than at pH 4.8. These results confirm the fact that the strength of wool fabric is at a maximum when the pH of the fibres is close to the isoelectric point.

A comparison of methods to calculate the optimal load for maximal power output in the power clean

The aim of this study was to compare three calculation methods to determine the load that maximises power output in the power clean. Five male athletes (height=179.8 10.5cms, weight 91 .8 8.8kg, power dean 1RM = 117.0 20.5kg) performed two per cleans at 10% increments from 50% to 100% of 1RM. Bar displacement data was collected using a Ballistic Measurement System (BMS) and vertical ground reaction force (VGRF) data was measured by a Kistler 9287B Force Plate. Power output was calculated for BMS (system mass), BMS (bar mass) and VGRF/BMS system mass. Optimal load was determined to be 70% for the BMS (system mass) and VGRF BMS (system mass) methods and 90% for the BMS (bar mass) method. Sports scientists should be aware of the technical issues underlying these findings due to the practical ramifications for athlete testing and training.