CH2 - lighting and physiology

This paper explains the designed performances of the new CH2 building in Melbourne, Australia. CH2 is an environmentally significant project that involves biomimicry of natural systems to produce indoor conditions that are conducive to user comfort, health and productivity. This paper focuses on lighting and  physiology and examines the solutions chosen for artificial and natural lighting and the likely effects these will have on building occupants. The purpose of the paper is to critically comment on the adopted strategy and, cognisance of  contemporary thinking in lighting design, to judge the effectiveness of this aspect of the project with a view to later verification and post-occupancy review. The  paper concludes that CH2 is an exemplar of lighting innovation that provides valuable lessons to designers of office buildings, particularly in the Melbourne CBD.

Wavelet packets for lighting-effects determination

This paper presents a system to determine lighting effiects within face images. The theories of multivariate discriminant analysis and wavelet packets transform are utilised to develop the proposed system. An extensive set of face images of different poses, illuminated from different angles, are used to train the system. The performance of the proposed system is evaluated by conducting experiments on different test sets, and by comparing its results against those of some existing counterparts.

Does the flicker frequency of fluorescent lighting affect the welfare of captive European starlings?

It is common practice for captive birds to be kept under fluorescent lighting, which typically flickers at either 100Hz (UK) or 120 Hz (USA). Such lighting was developed for human vision and it is thought that birds may be able to detect higher frequencies of flicker than humans. For humans, 100Hz fluorescent lighting has been linked to eyestrain, headaches and migraine, even though this rate of flicker is above the human perceptual flicker-fusion frequency of around 60 Hz. Keeping birds under 100 Hz lighting is therefore potentially detrimental to their welfare. We studied the preferences of wild-caught European starlings, Sturnus vulgaris, for high-frequency (HF, >30 kHz) fluorescent lighting versus conventional low-frequency (LF, 100 Hz) fluorescent lighting. The flicker frequency of the HF lighting would be undetectable to the nervous system of any animal. We also exposed starlings to either HF or LF light for 2 weeks, and investigated the degree of stress caused by each environment by monitoring their behaviour and plasma corticosterone levels. Groups of starlings showed a preference for HF lighting over LF lighting (P < 0.001), which indicates that they can detect a difference between the two lighting conditions and find the HF lighting preferable. However, there were no measurable differences in behaviour or plasma corticosterone levels when the birds were housed under either HF or LF for 2 weeks, thus providing initial evidence that housing starlings under 100Hz lighting may not be detrimental to the welfare of starlings during early captivity. (C) 2003 Elsevier B.V. All rights reserved.

Solar lanterns or solar home lighting systems – community preferences in East Timor

Access to electrification in rural areas of East Timor is extremely limited with as few as 5% of rural households connected to electricity. The government of East Timor intends to increase rural access to electricity significantly in the coming decade. The introduction of small PV systems is envisaged for many households in the most remote areas. Several agencies have piloted the introduction of small solar home systems (SHS) and solar lanterns. In the Railaco sub-district of East Timor, some 1000 households have experience of using either SHS and/or solar lanterns and are in a unique position to indicate a preference regarding these forms of PV lighting technology. This paper reports on a survey of 76 households in Railaco investigating experience with PV lighting systems. Results of the survey indicate a strong preference by users for SHS rather than lanterns. The preference for SHS arose from a range of factors including: a perception of better light quality; ability to illuminate the whole house; reduced risk of damage to the PV equipment; and longer duration of nightly operation. The research indicates that where a single PV lighting system is provided, users are likely to prefer SHS to solar lanterns.

Adaptive model for foreground extraction in adverse lighting conditions

Background elimination models are widely used in motion tracking systems. Our aim is to develop a system that performs reliably under adverse lighting conditions. In particular, this includes indoor scenes lit partly or entirely by diffuse natural light. We present a modified "median value" model in which the detection threshold adapts to global changes in illumination. The responses of several models are compared, demonstrating the effectiveness of the new model.

Effects of task lighting on visual function in age-related macular degeneration

The purpose was to investigate the effects of the spectral power distribution (SPD) and illuminance of task lighting on visual function in age-related macular degeneration (ARMD) compared to normal healthy eyes. Twenty-eight subjects with ARMD and 18 age-matched normal subjects were studied. The effects on visual function were determined for four common task light sources: standard pearl coat incandescent (SP), daylight blue incandescent (DL), warm white fluorescent (WW) and cool white fluorescent (CW). Apart from a small, statistically significant improvement in contrast sensitivity with DL compared to SP lighting (0.5 dB, p = 0.01), there were no significant effects of SPD on other visual functions and no differences in the effects for subjects with ARMD and those with normal vision. Thus, for task lighting typically used in low vision rehabilitation, the SPD would seem to be of minimal clinical importance to visual function. However, increasing the task illuminance had a greater effect on visual function, in particular for subjects with ARMD (p < 0.01). For an increase in illuminance from 300 to 3000 lux, the mean increase in contrast sensitivity and near visual acuity was 1.5 dB and 0.13 log MAR, respectively. Although this effect is not large, we suggest that it is clinically relevant and supports the provision of additional task illuminance as an important part of low vision rehabilitation for patients with ARMD.

A case for a mobile architecture and built environment laboratory

Deakin University and other research and industry partners have recently won a grant for the establishment of a Mobile Architecture and Built Environment Laboratory (MABEL). MABEL provides the first means of integrated, on-site measurement of the key aspects of the built environment (power, sound, light and comfort) using the latest instrument technology. There exists an ongoing need to establish a versatile and comprehensive in-situ testing facility for built internal environments, for the provision of research, education, training and technology diffusion. The ability to make on-site measurements across the environmental spectrum is unique and important. Individual measurements might demonstrate improved lighting performance, reduced power consumption, and improved ventilation or better building acoustics. More importantly, an integrated perspective will address an interaction in terms of energy efficiency and overall occupant comfort. H is recognised that many of the parameters we can measure with existing instrumentation remain unresolved regarding their diagnostic significance on occupant health, comfort and productivity. Also, developed standards for in-situ measurement are at an emerging state, in the delivery of reliable and useful assessment methods. This paper discusses the inception and role of the MABEL facility for building research, learning and teaching.

Learning from measurement

The Built Environment Research Group (BERG) at the School of Architecture and Building at Deakin University is involved in the monitoring of building energy consumption, lighting and acoustic levels, as well as material and thermal performance. Such measurements have taken place in several buildings over the last few years. This has been the result of a deliberate policy of BERG to initiate a process that completes the loop of design, prediction, monitoring, verification, teaching, then back to design again. This paper presents a summary of some projects that have involved building monitoring. We have established a methodology for measuring buildings which will be discussed, as well as the reasoning behind our desire to monitor buildings in general. The paper will present a summary of the results of measurement acquired to date (energy consumption, schedules, operation, etc.) and the lessons that have been learned from this monitoring program.

Image matching using TI multi-wavelet transform

A multi-resolution image matching technique based on multiwavelets followed by a coarse to fine strategy is presented. The technique addresses the estimation of optimal corresponding points and the corresponding disparity maps in the presence of occlusion, ambiguity and illuminative variations in the two perspective views taken by two different cameras or at different lighting conditions. The problem of occlusion and ambiguity is addressed by a geometric topological refining approach along with the uniqueness constraint whereas the illuminative variation is dealt by using windowed normalized correlation.