Recruitment of the infaunal bivalve Soletellina Alba (Lamark,1818) (Bivalvia: Psammobiidae) in response to different sediment types and water depths within the intermittently open Hopkins River estuary

Studies examining recruitment processes for soft-sediment macroinvertebrate fauna in intermittent estuaries are rare and most studies of active habitat selection have been tested in the laboratory rather than the field. The present field study examined whether recruitment of the infaunal bivalve Soletellina alba was influenced by water depth and sediment particle size in the intermittent Hopkins River estuary, southern Australia. The number of recruits in sediment trays differed between water depths, but active habitat selection was not evident across treatments of varying sediment particle size. The use of sediments with varying particle sizes also provided an opportunity to identify potential discontinuities in body-size distributions of recruits associated with varying habitat architecture. The length (mm) of recruits was converted to the same scale used to express sediment particle size (i.e. phi units: phi = − log2 of sediment particle size). The size of recruits differed across water depths, but did not differ across treatments with fine (phi = 3) versus coarse (phi = 1) sediment, and no relationships were apparent between bivalve size and sediments consisting of varying particle size. These patterns of recruitment do not correspond with the distribution of adult S. alba within the Hopkins River estuary. Previous sampling has shown that abundances of juvenile and adult S. alba are variable across time, site and water depth, but are often greater at the deeper water depth (1.05 m below the Australian Height Datum). However, recruitment during the present study was greatest at the shallower water depth (0.05 m below AHD), and the apparent absence of active habitat selection suggests that the distribution of adults is unlikely to be attributable to differences in recruitment associated with sediments of varying particle size.

Soft-sediment deformation structures in the middle permian Wandrawandian siltstone, southern Sydney basin: implications for depositional environment and basin tectonics

The Middle Permian Wandrawandian Siltstone at Warden Head near Ulladulla in the southern Sydney Basin is dominated by fossiliferous siltstone and mudstone, with a large amount of dropstones (lonestones) and some pebbly sandstone beds. Two general types of deposits are recognised from the cliff succession in view of the timing and mechanism of their formation. One is represented by the background (or primary) deposits of offshore to slope environments with abundant dropstones of glacial marine origin. This facies occurs throughout the cliff sections at Warden Head. The second type is distinguished by secondary, soft-sediment deformational deposits and structures of the primary (background) deposits, and comprises three successive layers of sandy mudstone dikes. In the second type of deposit, metre scale, laterally extensive syn-depositional slump deformation structures occur extensively in the middle part of the Wandrawandian Siltstone. The deformation structures vary in morphology and pattern, including large-scale complex-type folds, flexural stratification, concave-up structures, small-magnitude -faults accompanied by folding and brecciation. The slumps and associated syn-depositional structures are herein attributed to penecontemporaneous deformations of soft sediments (mostly mud and silty mud), formed as a result of mass movement of unconsolidated and/or semi-consolidated substrate following earthquake events. The occurrence of the earthquake event deposits (or seismites) at Warden Head supports the current view that the Sydney Basin was located in a back-arc setting near the New England magmatic arc on an active continental margin during the Middle Permian, and the timing of the earthquake events is here interpreted to indicate the onset of the Hunter Bowen Orogeny in the southern Sydney Basin.

Permian soft-sediment deformation structures related to earthquake in the Southern Sydney Basin, Eastern Australia

Sydney Basin is located in the eastern part of Australia, Lachlan Fold Belt, and between the New England Fold Belt. From the Sydney basin at the end of the Late Carboniferous to Middle Triassic experienced back-arc spreading to the foreland basin at different stages: back-arc spreading stage (Carboniferous ), A passive thermal subsidence stage (early in the Permian Berry) and load deflection extruding stage (in Broughton Permian - Triassic). This time at the Sydney basin on the eastern side of the New England Fold Belt for the island Background of the arc. As a result, back-arc in the Permian Basin of the South Sydney basin by the back-arc spreading the eastern side of the arc and trench subduction before the impact of strong seismic activity, the development of a series of earthquake-related seismites to form various types and Seismic activity related to the deformation of soft sediment structure. Permian Basin, South Sydney's soft sediment deformation including cracks in shock-fold, liquefied vein, volcanic sand, load structure, flame Construction, pillow-like structure, spherical structure, pillow Layer structure slump, and so breccia. To which the cracks in shock-fold fibrillation is a direct result of earthquake faults and folds; pillow is a layer of sand caused by the earthquake fibrillation dehydration, the formation of the sinking; liquefied vein, Volcanic sand for the liquefaction of sand penetration of the formation of earthquake fissures formed; load structure, flame Construction, pillow-like structure, spherical structure is affected by the earthquake fibrillation in the sand, mudstone interface because of the sinking sand, mud layer formed through ; Slump structures and breccia of the earthquake was caused by the gravitational collapse or the formation of the debris flow. Fissures, earthquake-fold, liquefied vein, volcanic sand, load structure, flame Construction, pillow-like structure, spherical structure, pillow-like layer Equivalent to the original earthquake rocks the plot, and the slump structures and breccia of the plot belong to different earthquake rocks.

Soft-sediment deformation structures interpreted as seismite from the Middle Permian of the southern Sydney Basin, southeastern Australia

The Middle Permian Wandrawandian Siltstone of the southern Sydney Basin is well exposed along the coastline from Lagoon Head in the south to North Head in the north near Ulladulla in southern New South Wales. The unit is dominated by fossiliferous siltstone and mudstone, with abundant dropstones and minor pebbly sandstone interbeds, and contains an interval of well-preserved and extensive soft-sediment deformation structures. These deformation structures occur mainly in the middle part of the cliff sections and are bounded above and below by undeformed sedimentary units of similar lithology. A wide range of soft-sediment deformation structures have been observed, including cracks, sandstone and sandy mudstone dykes, a possible sand volcano, networks of relatively small and closely connected fissure-like structures, metre-scale complex-type slump folds, flexural stratification, concave-up depressional structures, small-scale normal faults (with displacements usually <1 m), shear planes, and breccias (pseudonodules). The slumps and associated deformations are here collectively interpreted as representing a seismite deposit attributable to penecontemporaneous deformation of soft, hydroplastic sediment layers following a liquefaction triggered by seismic shocks. The timing of the inferred earthquake events appears to correspond to the onset of a major basin-wide tectonism during the Middle Permian.

Observations on the effects of caged carp culture on water and sediment metal concentrations in Lake Kasumingaura, Japan

The concentrations of 24 elements in the sediment and associated water column were monitored at two sites, one an area of intensive cage culture of carp, the other a wild site far from known cage culture areas, in Lake Kasumigaura, Japan, between September 1994 and September 1995. The concentrations of most elements in Lake Kasumigaura are mostly sub-parts per billion, except those for Ca, Fe, K, Mg, Na, P, and Si. The concentrations of Cd, Co, Cu, Mn, Ni, Pb, V, and Fe in Lake Kasumigaura are higher than the values in Lake Mashu, Lake Shikotsu, and Lake Biwa, and comparable to the levels in open ocean. Statistically significant differences in metal concentrations were observed between the culture and wild sites, with metal concentrations consistently higher at the culture site. Although cage culture of carp in the Lake Kasumigaura system may be causing localized increase in metal concentrations in the sediments, we must treat the results with caution, since the concentrations of metals observed in the sediments in 1995 were lower than those observed in 1979 for all metals at both sampling sites. In conclusion, further study of the concentrations of metals in the lake as a whole must be undertaken before the differences between the culture and wild sites can be proved, or disproved, to be the result of carp culture.

Laminated plate elements based on higher-order shear deformation theories

Efficient and accurate finite elements are crucial for finite element analysis to provide adequate prediction of the structural behavior. A large amount of laminated plate elements have been developed for finite element analysis of laminated composite plates based on the various lamination theories. A recent and complete review of the laminated finite elements based on the higher-order shear deformation theories, including the global higher-order theories, zig-zag theories and the global-local higher-order theories is presented in this paper. Finally some points on the development of the laminated plate elements are summarized.

Recent advances of finite elements for laminated composite plates

A large amount of finite elements have been developed for finite element analysis of laminated composite plates. The laminated plate theories are reviewed and summarized in this paper. The focus of this review is on the recently developed laminated finite elements since 1990. The 2-D triangular and quadrilateral displacement-based and mixed/hybrid-based finite element models, which were developed based on the first-order shear deformation theories, the higher-order shear deformation theories, the zig-zag theories and the global-local higher-order deformation theories, and the layer-wise laminated plate theories are reviewed in this paper and also their related patents. Finally, some points on the development of the laminated finite elements are summarized.

A family of simple and robust finite elements for linear and geometrically nonlinear analysis of laminated composite plates

A family of simple, displacement-based and shear-flexible triangular and quadrilateral flat plate/shell elements for linear and geometrically nonlinear analysis of thin to moderately thick laminate composite plates are introduced and summarized in this paper.

The developed elements are based on the first-order shear deformation theory (FSDT) and von-Karman’s large deflection theory, and total Lagrangian approach is employed to formulate the element for geometrically nonlinear analysis. The deflection and rotation functions of the element boundary are obtained from Timoshenko’s laminated composite beam functions, thus convergence can be ensured theoretically for very thin laminates and shear-locking problem is avoided naturally.

The flat triangular plate/shell element is of 3-node, 18-degree-of-freedom, and the plane displacement interpolation functions of the Allman’s triangular membrane element with drilling degrees of freedom are taken as the in-plane displacements of the element. The flat quadrilateral plate/shell element is of 4-node, 24-degree-of-freedom, and the linear displacement interpolation functions of a quadrilateral plane element with drilling degrees of freedom are taken as the in-plane displacements.

The developed elements are simple in formulation, free from shear-locking, and include conventional engineering degrees of freedom. Numerical examples demonstrate that the elements are convergent, not sensitive to mesh distortion, accurate and efficient for linear and geometric nonlinear analysis of thin to moderately thick laminates.

A simple displacement-based quadrilateral laminated composite plate element - part I : linear analysis

Based on the first-order shear deformation theory (FSDT) and Timoshenko's laminated composite beam functions, a simple displacement-based 4-node, 24-dof quadrilateral laminated plate element is proposed in this paper for linear analysis of thin to moderately thick laminates. The deflection and rotation functions of the element boundary are obtained from the Timoshenko's laminated composite beam functions, hence convergence to the thin plate solution can be achieved theoretically and shear-locking problem is avoided naturally. The in-plane displacement functions of a quadrilateral plane element with drilling degrees of freedom are taken as the in-plane displacements of the proposed quadrilateral element. Some numerical examples of linear analysis of composite laminated plates are calculated, and the results show that the proposed element is convergent, shear-locking free, efficient, accurate and not sensitive to mesh distortion.

A simple displacement-based quadrilateral laminated composite plate element : Part II : linear analysis

The 4-node, 24-dof quadrilateral displacement-based element (Zhang et al. 2004), which have been developed successfully for linear analysis of thin to thick laminated composite plates, is extended further for geometrically nonlinear analysis in this paper. The proposed element is based on the first-order shear deformation theory (FSDT) and von-Karman's large deflection theory, and the total Lagrangian approach is employed to formulate the element. The deflection and rotation functions of the element boundary are obtained from Timoshenko's laminated composite beam functions. The developed element is simple in formulation, free from shear-locking, and include conventional engineering degrees of freedom. Numerical examples demonstrate that the element is accurate and efficient for large deformation, small rotation geometrically nonlinear analysis of thin to moderately thick laminated composite plates.

Mechanical characterizations of thick laminated composites before and after bonded repair

One set of composite laminates was manufactured from bi-directional carbon fibre woven cloth pre-impregnated with epoxy resin and used to establish experimental techniques. Another, similar set was used for extensive data collection. One other set of laminates, manufactured from uni-directional carbon fibre, was also subjected to extensive tests to represent a different material. The results give the pre and post characterizations of repaired composite materials; outlining at each stage the losses and gains of structural strength and stiffness and discusses the difficulties experienced.

Distributional overlap rather than habitat differentiation characterizes co-occurrence of bivalves in intertidal soft sediment systems

Diverse species assemblages are often associated with a diversity of habitat structures. Sedimentary systems seem to be no exception, as within sedimentary systems benthic species diversity within a sample point appears to correlate with sediment grain size complexity. However, it remains to be shown whether total benthic species diversity relates to a system’s sediment heterogeneity across multiple systems. In the present paper we examined whether bivalve diversity is associated with: (1) sediment heterogeneity across systems and (2) sediment grain size complexity within systems, at 9 temperate and tropical tidal flat systems. Although bivalve life-history strategies, like post-settlement habitat selection, might suggest that sediment heterogeneity should be important for bivalve species, bivalve diversity and sediment heterogeneity were not associated across systems. Interestingly, the association between total benthic diversity and sediment heterogeneity was also not significant, suggesting that changing species composition across systems does not account for the lack of a correlation between bivalve diversity and sediment heterogeneity. Instead of habitat differentiation, bivalve diversity within a sample point was highest in ‘complex’ fine-grained sediments and bivalve distributions showed a large degree of distributional overlap in all systems. The results of this study at both smaller and larger spatial scales suggest that coexistence between bivalve species in diverse tidal flats is not associated with increased sediment heterogeneity.

Repeatable sediment associations of burrowing bivalves across six European tidal flat systems

Burrowing bivalves are associated with particular sediment types within sedimentary systems. The degree to which bivalve sediment associations are repeatable across systems has seldom been investigated. To investigate whether such repeatability exists across tidal flats, we compared adult and juvenile distributions of 3 bivalve species (Cerastoderma edule, Scrobicularia plana, Macoma balthica) across 6 European tidal flats. Across systems, the adult bivalves showed fairly repeatable distributions, with C. edule occurring in sandy sediments and M. balthica and S. plana occurring in muddy sediments. Exceptions were observed in systems composed primarily of muddy sediments (Aiguillon Bay and Marennes-Oléron Bay) and the Dutch Wadden Sea. Interestingly, juveniles and adults of C. edule and S. plana showed similar distributions across systems. M. balthica juveniles and adults showed habitat separation in 3 of the 6 studied systems; in 2 of these, it has been shown previously that juvenile M. balthica settle in mud at high tidal levels and migrate to lower sandier flats later in life. The high occurrence of juvenile M. balthica towards high sandy flats in Mont Saint-Michel Bay suggests that juveniles might choose high tidal flats rather than muddy sediments per se. A repeatable association in adults and juveniles with respect to sediment could suggest that juveniles actively settle in the proximity of the adults and/or that juveniles settling away from the adults incur a higher mortality due to either predation, physiological stress, or other factors.