Teleoperation of ABB industrial robots

Purpose - The purpose of this paper is to analyse teleoperation of an ABB industrial robot with an ABB IRC5 controller. A method to improve motion smoothness and decrease latency using the existing ABB IRC5 robot controller without access to any low-level interface is proposed. Design/methodology/ approach - The proposed control algorithm includes a high-level proportional-integral-derivative controller (PID) controller used to dynamically generate reference velocities for different travel ranges of the tool centre point (TCP) of the robot. Communication with the ABB IRC5 controller was performed utilising the ABB PC software development kit. The multitasking feature of the IRC5 controller was used to enhance the communication frequency between the controller and the remote application. Trajectory tracking experiments of a pre-defined three-dimensional trajectory were carried out and the benefits of the proposed algorithm were demonstrated. The robot was intentionally installed on a wobbly table and its vibrations were recorded using a six-degrees-of-freedom force/torque sensor fitted to the tool mounting interface of the robot. The robot vibrations were used as a measure of the smoothness of the tracking movements. Findings - A communication rate of up to 250 Hz between the computer and the controller was established using C#.Net. Experimental results demonstrating the robot TCP, tracking errors and robot vibrations for different control approaches were provided and analysed. It was demonstrated that the proposed approach results in the smoothest motion with tracking errors of < 0.2 mm. Research limitations/implications - The proposed approach may be employed to produce smooth motion for a remotely operated ABB industrial robot with the existing ABB IRC5 controller. However, to achieve high-bandwidth path following, the inherent latency of the controller must be overcome, for example by utilising a low-level interface. It is particularly useful for applications including a large number of short manipulation segments, which is typical in teleoperation applications. Social implications - Using the proposed technique, off-the-shelf industrial robots can be used for research and industrial applications where remote control is required. Originality/value - Although low-level control interface for industrial robots seems to be the ideal long-term solution for teleoperation applications, the proposed remote control technique allows out-of-the-box ABB industrial robots with IRC5 controllers to achieve high efficiency and manipulation smoothness without requirements of any low-level programming interface. © Copyright - 2014 Emerald Group Publishing Limited. All rights reserved.

Improvements in teleoperation of industrial robots without low-level access

 This paper proposes a method to improve motion smoothness and decrease latency using existing ABB IRC5 robot controllers without access to any low level interface. The proposed control algorithm includes a high-level PID controller used to dynamically generate reference velocities for different travel ranges of the tool centre point (TCP) of the robot. Communication with the ABB IRC5 controller was performed utilising the ABB PC software development kit (SDK). The multitasking feature of the IRC5 controller was used in order to enhance the communication frequency between the controller and the remote application. Trajectory tracking experiments of a predefined 3D trajectory were carried out and the benefits of the proposed algorithm was demonstrated. The robot was intentionally installed on a wobbly table and its vibrations were recorded using a six degrees of freedom (DOF) force/torque sensor fitted to the tool mounting interface of the robot. The robot vibrations were used as a measure of the smoothness of the tracking movements. Experimental results demonstrating the robot tool centre point (TCP), tracking errors, and robot vibrations for different control approaches were provided and analysed. It was demonstrated that the proposed approach results in the smoothest motion with less than 0.2 mm tracking errors.

Extending an industrial root controller : implementation and applications of a fast open sensor interface

An overview is given of the design and implementation of a platform for fast external sensor integration in an industrial robot system called ABB S4CPlus. As an application and motivating example, the implementation of force-controlled grinding and deburring within the AUTOFETT-project is discussed. Experiences from industrial usage of the fully developed prototype confirms the appropriateness of the design choices, thus also confirming the fact that control and software need to be tightly integrated. The new sensor can be used for the prototyping and development of a wide variety of new applications

Learning skills : robotics technology in automotive powertrain assembly

The past 40 years have seen industrial robots establish their superiority over humans in most areas of manufacturing requiring endurance or repeatability. One important application domain, however, has so far lagged behind the industry’s expectations: mechanical assembly. As fast, precise and dependable as they are, traditional industrial robots just don’t seem able to perform certain assembly operations as well as a skilled human worker. A task as simple as screwing a light bulb into a lamp socket shows why. Applying the right amount of force and turning the bulb at just the right time, at exactly the right angle, is something a human does intuitively. How can a robot be programmed to do this? For robots to successfully emulate humans on an assembly line, they need to have force-sensing capability and exhibit compliance. They must be able to direct forces and moments in a controlled way, and react to contact information. New robot force control technology from ABB shows how.