Characterisation of nickel(II) extraction by 2-hydroxy-5-nonylacetophenone oxime (LIX 84) in a micellar phase

The properties of the nickel(II)/2-hydroxy-5-nonylacetophenone oxime (HNAPO), an active ingredient in LIX 84, extraction system were characterised in a micellar system. The extinction coefficient, λ_max of HNAPO (316 nm) and the Ni²⁺ complex (387 nm) in a neutral micellar system, poly dispersed octa-ethyleneglycol mono-n-dodecyl ether (G₁₂A₈) were determined as 3100 and 3500 M⁻¹ cm⁻¹, respectively. HNAPO was found to have a neutral micellar phase and bulk aqueous phase pK_a of 11.5 and 12.5, respectively. The extraction equilibrium constant, K_ex, was determined to be 10^−8.0, and the deviation from theory observed at high pH can be accounted for by consideration of the competition for nickel(II) ions by hydroxide ions and HNAPO. A micellar phase of octa-ethyleneglycol mono-n-dodecyl ether (C₁₂E₈) was determined to be an appropriate model of the free oil/water interface from the solubilised location of HNAPO. Utilising the interfacial probe, 4-heptadecyl-7-hydroxy coumarin (HHC) allowed the determination of the electrostatic surface potential of mixed micelles of G₁₂A₈ and sodium dodecyl sulphate (SDS) or dodecyl trimethyl ammonium chloride (DTAC). The electrostatic surface potential was a linear function of the number of additional surfactant monomers within the G₁₂A₈ micelle, for the concentration range studied. For G₁₂A₈/DTAC mixed micelles, the surface potential was given by +1.1 mV per DTAC molecule per micelle, and for G₁₂A₈/SDS mixed micelles the relationship was −1.4 mV per SDS molecule per micelle.

Investigation of seismic effects on disturbed rock slope stability assessments

For general stability analysis of rock slopes, rock mass strength and rock mass disturbance are definitely should be considered. In addition, the impact of earthquakes must be taken into account. In fact, the rock mass strength is very difficult to be assessed which causes the difficulty of analysing rock slope stability. Therefore, an empirical failure criterion, the Hoek-Brown failure criterion, has been proposed. It is one of the most widely accepted approaches to estimate rock mass strength. The rock mass disturbance is important and was found having significant influence on evaluating rock slope stability, especially for rock slope with poor quality rock mass. In the Hoek-Brown failure criterion, the disturbance factor can represent the level of the rock mass disturbance which would provide a reasonable basis for estimating rock mass strength. This research will not only discuss the slope factor of safety, but also consider the influence of the seismic force on rock slope stability assessment using pseudo-static method. In practice, only horizontal seismic coefficient is used. Various magnitudes of the disturbance factor and recommended blasting damage zone thickness are also taken into account. The blasting damage zone thickness considered ranges from 0.5 to 2.5 times of slope height. The research results have potential to be extended and then sets of comprehensive stability charts can be provided for the rock slope stability evaluations. They will be convenient tools for practising engineers. In this study, finite element upper bound and lower bound limit analysis methods are employed. Their applicability has been investigated in some previous studies. The differences between upper bound and lower bound solutions are less than ±10% which would provide reasonable and acceptable range for rock slope stability safety factor estimation.

A new genus of Rhynchonellid Brachiopod from the Lower Triassic of South China and Implications for timing the recovery of Brachiopoda after the end-Permian mass extinction

A new genus, Meishanorhynchia, is proposed based on new material from the Lower Triassic of the Meishan section, South China. It is of a late Griesbachian age based on both associated biozones (ammonoids and
bivalves) and radiometric dates of the intercalated volcanic ash beds. Comparison with both Palaeozoic and Mesozoic-Cenozoic-related genera suggests that it may represent the first radiation of progenitor brachiopods in the aftermath of the end-Permian extinction. The lowest brachiopod horizon that contains the genus is estimated to be about 250.1±0.3 Ma. This implies that the initial stage of recovery of Brachiopoda in the Early Triassic was probably about 1.3±0.3 myr after the major pulse of the end-Permian mass extinction (dated as 251.4±0.3 Ma). This is in agreement with Hallam's expectancy that biotic recovery typically begins within one million years or so of major mass extinctions, in contrast to current views on the end-Permian extinction event which propose that the recovery of most if not all biotic groups in the Early Triassic was severely delayed and only began about five million years after the end-Permian extinction.

Skin friction coefficient on a yarn package surface in ring spinning

The skin friction coefficient on the surface of a rotating yarn package affects the power required to drive the package. This paper examines the relationship between the skin friction coefficient on the package surface and its diameter and rotating speed, based on the fundamentals of aerodynamics and the experimental results of power consumption. Skin friction coefficients on the surfaces of an airplane, car top, and yarn package are discussed. The results indicate that the skin friction coefficient on the package surface without hairiness depends on the package diameter and spindle speed only. The skin friction coefficient on the yarn package surface is about three times that on the top surface of a car, and is about twenty times that on an airplane surface. The power consumed to overcome skin friction drag is more than that consumed to drive the spindle if the spindle speed is very slow. However, the situation reverses when the spindle speed is fast.

Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed

The mass transfer during carburising in a fluidised bed and in a steel workpiece has been studied experimentally in this work. This involved carburising experiment in an electrically heated fluidised bed at 900–970°C with natural gas and air as the atmosphere. A steel workpiece was designed to provide a range of carbon transfer surfaces of different geometries in the fluidised bed, and the carbon transfer coefficient was measured at these surfaces. The carbon transfer coefficient was determined from the carbon distribution within the diffusion layer of the sample. An empirical relationship of the carbon potential as a function of carburising atmosphere, bed temperature and fluidising velocity was determined, based on the understanding of the mass transfer mechanism and analysis of the experimental results.

Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming

To quantify the frictional behaviour in sheet forming operations, several laboratory experiments which simulate the real forming conditions are performed. The Bending Under Tension Test is one such experiment which is often used to represent the frictional flow of sheet material around a die or a punch radius. Different mathematical representations are used to determine the coefficient of friction in the Bending Under Tension Test. In general the change in the strip thickness in passing over the die radius is neglected and the radius of curvature to thickness ratio is assumed to be constant in these equations. However, the effect of roller radius, sheet thickness and the surface pressure are also omitted in some of these equations. This work quantitatively determined the effect of roller radius and the tooling pressure on the coefficient of friction. The Bending Under Tension Test was performed using rollers with different radii and also lubricants with different properties. The tool radii were found to have a direct influence in the contact pressure. The effect of roller radius on friction was considerable and it was observed that there is a clear relationship between the contact pressure and the coefficient of friction.

Carburising and carbon transfer coefficient in a fluidised bed furnance

The carburising of a steel workpiece with complex geometry in a fluidised bed hasbeen studied experimentally. This involved carburising experiment in an electrically heated fluidised bed at 900 - 970°C with natural gas and air as the atmosphere. The carbon transfer coefficient at the workpiece surface and diffusivity within the workpiece were determined from the carbon distribution within the diffusion layer of the sample. A reverse method and the Levenberg-Marquardt algorithm were used in the calculations. The methodology of the reverses method to extract the carbon transfer coefficient and diffusivity is also discussed in some detail.

Paleobiogeographical extinction patterns of Permian brachiopods in the Asian-western Pacific region

Spatial and temporal variations in biological diversity are critical in understanding the role of biogeographical regulation (if any) on mass extinctions. An analysis based on a latest database of the stratigraphic ranges of 89 Permian brachiopod families, 422 genera, and 2059 species within the Boreal, Paleoequatorial, and Gondwanan Realms in the Asian–western Pacific region suggests two discrete mass extinctions, each possibly with different causes. Using species/family rarefaction analysis, we constructed diversity curves for late Artinskian–Kungurian, Roadian–Wordian, Capitanian, and Wuchiapingian intervals for filtering out uneven sampling intensities. The end-Changhsingian (latest Permian) extinction eliminated 87–90% of genera and 94–96% of species of Brachiopoda. The timing of the end-Changhsingian extinction of brachiopods in the carbonate settings of South China and southern Tibet indicates that brachiopods suffered a rapid extinction within a short interval just below the Permian/Triassic boundary.

In comparison, the end-Guadalupian/late Guadalupian extinction is less profound and varies temporally in different realms. Brachiopods in the western Pacific sector of the Boreal Realm nearly disappeared by the end-Guadalupian but experienced a relatively long-term press extinction spanning the entire Guadalupian in the Gondwanan Realm. The end-Guadalupian brachiopod diversity fall is not well reflected at the timescale used here in the Paleoequatorial Realm because the life-depleted early Wuchiapingian was overlapped by a rapid radiation phase in the late Wuchiapingian. The Guadalupian fall appears to be related to the dramatic reduction of habitat area for the brachiopods, which itself is associated with the withdrawal of seawater from continental Pangea and the closure of the Sino-Mongolian seaway by the and-Guadalupian.

Assessment of delamination in composite beams using shear horizontal (SH) wave mode

Interaction of Lamb waves with structural damage can lead to wave mode conversion. In this study, the shear horizontal (SH) wave, from the mode conversion of the fundamental symmetric Lamb wave (S0), was used for quantitative identification of delamination in composite beams, based on advanced signal processing using an inverse approach. SH wave propagation under various delamination conditions in CF/EP beams made of orthotropic plain woven fabrics was simulated, and signal characteristics were extracted in terms of the concept of digital damage fingerprints (DDF). With the aid of an artificial neural algorithm, the relation between the DDF of delamination-scattered SH mode and damage parameters was calibrated, whereby the occurrence, location and size of delamination in the composite beams were assessed. The approach was experimentally validated, and the results demonstrate the effectiveness of SH mode for quantitative damage evaluation of composite structures.

Sudden drawdown and drainage of a horizontal aquifer

Drainage of a saturated horizontal aquifer following a sudden drawdown is reanalyzed using the Boussinesq equation. The effect of the finite length of the aquifer is considered in detail. An analytical approximation based on a superposition principle yields a very good estimate of the outflow when compared to accurate numerical solutions. An illustration of the new analytical approach to analyze basin-scale field data is used to demonstrate possible field applications of the new solution.

Modelling the diffuse fraction of global solar radiation on a horizontal surface

For various applications it is necessary to know not only global solar radiation values, but also the diffuse and beam components. Because often only global values are available, there have been several models developed to establish correlations between the diffuse fraction and various predictors. These typically include the clearness index, but also may include the solar angle, temperature and humidity. The clearness index is the proportion of extraterrestrial radiation reaching a location, where the extraterrestrial value used in the calculation varies with latitude and time of year. These correlations have been developed using data principally from latitudes greater than 40°, often using only data from a few locations and with few exceptions have not used solar altitude as a predictor. Generally the data consist of hourly integrated values. A model has been developed using hourly data from a weather station set up at Deakin University, Geelong. Another model has also been developed for 15 minute data values in order to ascertain if the smoothing generated by using hourly data makes a significant difference to overall results. The construction of such models has been investigated, enabling an extension to the research, inclusive of other stations, to be performed systematically. A final investigation was carried out, using data from other Australian locations, to explain some of the considerable scatter by adding apparent solar time as a predictor, which proved to be significantly better than solar altitude.

Post-extinction brachiopod faunas from the late Permian Wuchiapingian coal series of South China

This paper describes fourteen brachiopod species in eleven genera from the Late Permian Wuchiapingian Coal Series (Lungtan Formation) of South China. Of these, the shell bed fauna from the basal Lungtan Formation is interpreted to represent the onset of the recovery of shelly faunas in the aftermath of the Guadalupian/Lopingian (G/L) mass extinction in South China. The post-extinction brachiopod faunas in the Wuchiapingian are characterized by the presence of numerous Lazarus taxa, survivors, and newly originating taxa. These elements capable of adapting their life habits were relatively more resistant to the G/L crisis. The post-extinction faunas, including survivors and the elements originating in the recovery period, have no life habit preference, but they were all adapted to a variety of newly vacated niches in the Late Permian oceans. Two new species, Meekella beipeiensis and Niutoushania chongqingensis, are described, and two Chinese genera, Niutoushania and Chengxianoproductus, are emended based on re-examination of the type specimens and new topotype materials from the Lungtan Formation.

End-Permian mass extinction pattern in the northern peri-Gondwanan region

The Permian-Triassic extinction pattern in the peri-Gondwanan region is documented biostratigraphically, geochemically and sedimentologically based on three marine sequences deposited in southern Tibet and comparisons with the sections in the Salt Range, Pakistan and Kashmir. Results of biostratigraphical ranges for the marine faunas reveal an end-Permian event comparable in timing with that known at the Meishan section in low palaeolatitude as well as Spitsbergen and East Greenland in northern Boreal settings although biotic patterns earlier in the Permian vary. The previously interpreted delayed extinction (Late Griesbachian) at the Selong Xishan section is not supported by our analysis. The end-Permian event exhibits an abrupt marine faunal shift slightly beneath the Permian-Triassic boundary (PTB) from benthic taxa- to nektic taxa-dominated communities. The climate along the continental margin of Neo-Tethys was cold before the extinction event. However, a rapid climatic warming event as indicated by the southward invasion of abundant warm-water conodonts, warm-water brachiopods, calcareous sponges, and gastropods was associated with the extinction event. Stable isotopic values of δ13Ccarb, δ13Corg and δ18O show a sharp negative drop slightly before and during the extinction interval. Sedimentological and microstratigraphical analysis reveals a Late Permian regression, as marked by a Caliche Bed at the Selong Xishan section and the micaceous siltstone in the topmost part of the Qubuerga Formation at the Qubu and Tulong sections. The regression was immediately followed by a rapid transgression beneath the PTB. The basal Triassic rocks fine upward, and are dominated by dolomitic packstone/wackestone containing pyritic cubes, bioturbation and numerous tiny foraminifers, suggesting that the studied sections were deposited during the initial stage of the transgression and hence may not have been deeply affected by the anoxic event that is widely believed to characterise the zenith of the transgression.