Growth of highly versus moderately trained competitive female artistic gymnasts

Purpose: To investigate whether growth was adversely affected in 137 young competitive female artistic gymnasts involved in different training volumes.

Methods: This was a 2-yr prospective cohort study in which height, sitting height, leg length, weight, skinfolds, and pubertal status were measured in competitive advanced (20–27 h·wk-1) and intermediate (7.5–22 h·wk-1) training level female gymnasts every 6–12 months. Biological parameters of the adolescent growth curve were estimated using the Preece–Baines growth model. Growth rates were estimated for both groups from the mixed-longitudinal data.

Results: Estimated ages at peak height velocity (PHV) (13–13.5 yr) and mean PHV (6.2–6.4 cm·yr-1) for the advanced- and intermediate-level gymnasts suggest that these gymnasts were later maturing and experienced a blunting of the growth spurt relative to reference values for U.S. youth. Comparison of growth velocities by pubertal status revealed that height velocity was lower in the advanced- versus the intermediate-level peripubertal gymnasts, which was due to a significant reduction in sitting height velocity (2.3 vs 3.1 cm·yr-1, P. < 0.05). No marked acceleration in height or sitting height velocity was detected in the advanced-level gymnasts from pre- to peripuberty. Inspection of individual growth rates revealed that over 35% of the pre- and peripubertal gymnasts experienced growth faltering (height velocity less than 4.5 cm·yr-1) during follow-up.

Conclusion: Advanced–and intermediate–training level competitive female gymnasts tend to exhibit an adolescent growth spurt that is similar in timing and tempo to short, normal, slowly maturing girls, but the high frequency of growth faltering suggests that training may alter the tempo of growth and maturation in some, but not all, female gymnasts.

The long and winding road : the development of a comprehensive, adequate and representative system of highly protected marine protected areas in Victoria, Australia

In 2002, the state of Victoria, Australia increased its “no-take” marine protected areas (MPAs) 100 fold to cover over 5% of its coastal waters in a comprehensive, adequate and representative system of marine national parks and sanctuaries. Given the ambitious targets set for MPA establishment globally in 2003 at the World Summit for Sustainable Development this apparently remarkable achievement could be an example to other nations and states attempting to establish substantial MPA systems.

This paper describes and discusses the factors that contributed to the establishment of the Victorian system and the relevance of these factors to other jurisdictions.

Nest-tree selection by the threatened brush-tailed phascogale (phascogale tapoatafa) (marsupialia: dasyuridae) in a highly fragmented agricultural landscape

The conservation of roosting and nesting resources is of critical concern for many hollow-dependent species around the world. We investigated the nest-tree requirements of the threatened brush-tailed phascogale (Phascogale tapoatafa) in a highly cleared agricultural landscape in south-eastern Australia. We documented the physical characteristics of selected nest trees and describe the spatial and temporal patterns of nest-tree use as revealed by radio-tracking. Nine phascogales (seven females, two males) were radio-tracked between March and July 1999 in an area where most woodland habitat is confined to linear strips along roads and streams or small patches and scattered trees in cleared farmland. Female phascogales were monitored for 13–35 days over periods of 5–15 weeks and two males were monitored for 2 and 9 days respectively. A total of 185 nest-tree fixes was collected and all nests occupied by phascogales were in standing trees. Eighty-three nest trees were identified, ranging in diameter at breast height (dbh) from 25 to 171 cm, with a mean dbh for the trees used by each individual phascogale of >80 cm. Phascogales did not discriminate between canopy tree species in selecting nest trees, but showed highly significant selection for trees in the largest size class. All individuals used multiple nest trees, with the seven females occupying an average of 11.4 nest trees from a mean of 25 diurnal locations. The number of nest trees continued to increase throughout the study, suggesting that more would be identified during a longer or more intensive study. Occupied nest trees were located throughout each individual’s home range, highlighting the importance of a continuous spatial distribution of suitable nest trees across the landscape. Nest trees were also located in adjacent farmland up to 225 m from roadside vegetation, demonstrating the value that scattered clumps and even single trees in farmland can have for wildlife conservation.

Toward highly available, self-healing, adaptable, grid-like and user friendly nondedicated clusters

The human body was used to illustrate an Autonomic Computing system that possesses self-knowledge, self-configuration, self-optimization, self-healing, and self-protection, knowledge of its environment and user friendliness properties. Autonomic Computing was identified by IBM as one of the Grand Challenges. Many researchers and research groups have responded positively to the challenge by initiating research around one or two of the characteristics
identified by IBM as the requirements for Autonomic Computing. One of the areas that could benefit from the comprehensive approach created by the Autonomic Computing vision is parallel processing on nondedicated clusters. This paper shows a general design of services and initial implementation of a system that moves parallel processing on clusters to the computing mainstream using the Autonomic Computing vision.

Highly programmable surface

A highly programmable electro-mechanical surface is developed using an effective array of individual pins arranged in a gridform. Each pin can be independently raised or lowered to create a wide range of contoured surfaces. It was found that as the number of elements increased. high levels of accuracy could still be achieved. however the required processing power increased logarithmically. This finding was attributed to the large amounts of data being passed. and subsequently led to a second focus; various methods of data management and flow control techniques within large-scale multi elemental systems. Results indicated a large potential for highly programmable surfaces within industry to provide a computer controlled surface for rapid prototyping. The research also revealed the potential for such a device to be used as a HID within Haptic applications.

Energy system contribution during 200- to 1500-m running in highly trained athletes

Purpose: The purpose of the present study was to profile the aerobic and anaerobic energy system contribution during high-speed treadmill exercise that simulated 200-, 400-, 800-, and 1500-m track running events.

Methods: Twenty highly trained athletes (Australian National Standard) participated in the study, specializing in either the 200-m (N = 3), 400-m (N = 6), 800-m (N = 5), or 1500-m (N = 6) event (mean O₂ peak [mL·kg^-1·min^-1] ± SD = 56 ± 2, 59 ± 1, 67 ± 1, and 72 ± 2, respectively). The relative aerobic and anaerobic energy system contribution was calculated using the accumulated oxygen deficit (AOD) method.

Results: The relative contribution of the aerobic energy system to the 200-, 400-, 800-, and 1500-m events was 29 ± 4, 43 ± 1, 66 ± 2, and 84 ± 1% ± SD, respectively. The size of the AOD increased with event duration during the 200-, 400-, and 800-m events (30.4 ± 2.3, 41.3 ± 1.0, and 48.1 ± 4.5 mL·kg^-1, respectively), but no further increase was seen in the 1500-m event (47.1 ± 3.8 mL·kg^-1). The crossover to predominantly aerobic energy system supply occurred between 15 and 30 s for the 400-, 800-, and 1500-m events.

Conclusions: These results suggest that the relative contribution of the aerobic energy system during track running events is considerable and greater than traditionally thought.

Nonribosomal peptide synthetases as technological platforms for the synthesis of highly modified peptied bioeffectors - cyclosporin synthetase as a complex example

Many microbial peptide secondary metabolites possess important medicinal properties, of which the immunosuppressant cyclosporin A is an example. The enormous structural and functional diversity of these low-molecular weight peptides is attributable to their mode of biosynthesis. Peptide secondary metabolites are assembled non-ribosomally by multi-functional enzymes, termed non-ribosomal peptide synthetases. These systems consist of a multi-modular arrangement of the functional domains responsible for the catalysis of the partial reactions of peptide assembly. The extensive homology shared among NRPS systems allows for the generalisation of the knowledge garnered from studies of systems of diverse origins. In this review we shall focus the contemporary knowledge of non-ribosomal peptide biosynthesis on the structure and function of the cyclosporin biosynthetic system, with some emphasis on the re-direction of the biosynthetic potential of this system by combinatorial approaches.

Population structure in the highly fragmented range of Tor douronensis (Cyprinidae) in Sarawak, Malaysia revealed by microsatellite DNA markers

1. Understanding the structure of threatened populations, particularly those that exist in degraded or fragmented habitats is crucial for their effective management and conservation. Recently developed methods of individual-based analysis of genetic data provide an unprecedented opportunity to understand the relationships amongst fragmented populations.

2. In the present study, population structure of an important cyprinid species (Tor douronensis), which is indigenous to Sarawak, Malaysia, is investigated as part of an ongoing conservation effort to restore threatened wild populations of the species. The population structure inferred using data from seven autosomal microsatellite loci was generally consistent with geography and habitat fragmentation.

3. The results indicate that there are two well-defined clusters of T. douronensis in Sarawak, namely the 'northeastern' and the 'southwestern' clusters. In addition, a further subdivision was observed in each of the clusters distributed between river systems. Low levels of gene flow were also observed and migrants between habitat fragments were identified, possibly resulting from human-mediated translocations.

4. Implications of the findings for management and conservation of T. douronensis are discussed.

Conceptualising a voluntary certification system for highly accomplished teachers

In this paper I argue that a voluntary certification system for highly accomplished teachers must be part of a coherent system of professional accountability which is developed, implemented and managed by the profession. This would be a system that engages professional judgement of evidence provided by teachers in relation to their professional knowledge and practice, and professional standards for teaching would provide the organising framework for that judgment. It would be a system incorporating and aligning all forms of professional licensure, including entry into the profession and subsequent professional milestones. It would be a system that all partners in the profession across Australia—employers, professional associations, and registration authorities—endorse, participate in and align with.

The profession can take the lead in developing and implementing such a coherent and coordinated national approach by carefully developing a system to recognise and reward highly accomplished teaching. Such a system should aim to recognise and build teacher quality by defining what it is highly accomplished teachers know and are able to do. Moreover, such a system must fi nd ways of making teaching public and acknowledging teaching as intellectual work which involves professional judgment that draws on a recognised professional knowledge base and contextualised knowledge about students and their learning.

The paper is presented in two main sections. First, a proposed conceptual framework for the professional recognition and certification of highly accomplished teachers is outlined. Then, the argument for this proposed conceptual framework is presented drawing on learnings from relevant research and professional activity in both Australia and the USA.

Bovine Muc1 is a highly polymorphic gene encoding an extensively glycosylated mucin that binds bacteria

The bovine Muc1 protein is synthesized by mammary epithelial cells and shed into milk as an integral component of the milk fat globule membrane; however, the structure and functions of this mucin, particularly in relation to lactation, are poorly defined. The objectives of this investigation were to investigate the Muc1 gene and protein structures in the context of lactation and to test the hypothesis that Muc1 has a role in innate immune defense. Polymerase chain reaction analysis of genomic DNA from 630 cattle revealed extensive polymorphism in the variable number of tandem repeats (VNTR) in the bovine Muc1 gene. Nine allelic
variants spanning 7 to 23 VNTR units, each encoding 20 AA, were identified. Three alleles, containing 11, 14, and 16 VNTR units, respectively, were predominant. In addition, a polymorphism in one of the VNTR units has the potential to introduce a unique site for N-linked glycosylation. Statistical analysis indicated weak associations between the VNTR alleles and milk protein and fat percentages in a progeny-tested population of Holstein-Friesian dairy cattle. No association with somatic cell count could be demonstrated. Bovine Muc1 was purified from milk fat globule membranes and characterized. The protein was highly glycosylated, primarily with O-linked sialylated T-antigen [Neu5Ac(α2–3)-Gal(β1–3)-GalNAcα1] and, to a lesser extent, with N-linked oligosaccharides, which together accounted for approximately 60% of the apparent mass of Muc1. Purified bovine Muc1 directly bound fluorescently labeled Escherichia coli BioParticles (Invitrogen, Mount Waverley, Australia) and inhibited their binding to bovine mammary epithelial cells grown in vitro.

Extending the Workers' Compensation Act 1987 (N.S.W.) to include independent contractors and to allow more highly paid workers to insure fully their income, with particular reference to engineers

In mid-1987, the existing workers’ compensation system in New South Wales was replaced by a new Scheme, called ‘WorkCover’. While WorkCover solved a number of the financial problems that had plagued its predecessor, its enactment created other issues. Furthermore, WorkCover has failed to deal with a number of gaps in providing compensation for occupational injuries, most notably those suffered by independent contractors. By combining a study of aspects of industrial law and industrial relations, this thesis will examine some of those problems and gaps, in particular: (a) Should WorkCover be amended to enable independent contractors to come within its ambit? (b) Should there be additional insurance cover available (known as ‘top-up’ insurance) to insure those parts of workers’ wages presently left unprotected by WorkCover? (c) Should workers be permitted to take out another form of ‘top-up’ insurance to increase the quantum of death cover presently provided by the Scheme? (d) Should independent contractors who arc permitted to enter WorkCover also be permitted to obtain the extended cover set out in (b) and (c) above? Where appropriate, the thesis compares WorkCover to the workers’ compensation schemes in other Australian jurisdictions. It develops each of the matters referred to above by referring to the results of the writer’s survey of members of the Institution of Engineers (NSW Branch) which was conducted in May and June 1991.

Magnetic liquid marbles : manipulation of liquid droplets using highly hydrophobic Fe3O4 nanoparticles

Magnetic liquid marbles exhibit a remarkable ability to be opened and closed reversibly under the action of a magnetic field. Liquid can be either extracted from or added to the opened liquid marble simply with a capillary needle. Two opened liquid marbles can also be coalesced into a larger one. The magnetic liquid marbles can be maneuvered two- and three-dimensionally.