Unique marine Permian-Triassic boundary section from Western Australia

A unique marine Permian-Triassic boundary section containing rich oil source rocks has been continuously cored in a petroleum borehole from the Perth Basin of Western Australia. Such sequences, which provide a biostratigraphic and environmental record at the time of the largest extinction event of the past 500 million years, are globally rare, and this is the first to be documented in Australia. Throughout geological history there have been periods of global marine anoxia that commonly resulted in the widespread deposition of petroleum source rocks, most notably in the mid-Cretaceous and Late Jurassic. An apparent paradox is that, previously, source rocks have not been recognised in association with the Permian-Triassic boundary, despite widespread marine anoxia at this time. The Perth Basin source rocks contain abundant and unusual biomarkers, apparently related to the highly specialised and limited biota that flourished in the aftermath of the end-Permian extinction event. Local conditions may have favoured source-rock development, either due to higher productivity resulting from coastal upwelling or through enhanced preservation under strongly anoxic conditions.

Self-perceived quality of life for adolescents with physical disabilities - a preliminary study

The purpose of this study was to explore the effect of physical disabilities (PD) on the quality of life (QoL) of adolescents aged from 10 to 18 years. Sixty-three adolescents with PD (aged 14.9 ± 2.4 years) from primary (5th grade or above) to high schools in Kaohsiung City volunteered to participate in this research; 282 children without disability (aged 13.8 ± 2.3 years) attending schools in the same geographical region were recruited as controls. The Student Version of the Comprehensive Quality of Life Scale was used in this study. This is a multidimensional self-report, global measure of subjective and objective QoL. Multivariate analysis of variance revealed that the two groups were significantly different in objective QoL (F = 11.53, p < 0.001). Material wellbeing was substantially lower in the PD group when compared to the control group. In contrast, domains such as productivity, safety, and emotion were higher in the PD group. Among the subjective scales, the PD group showed higher productivity and better emotion when compared to the control group. No significant correlation was observed between objective and subjective overall QoL scores (r = 0.20, p = 0.12) in the PD group. These findings showed that subjects with PD in regular schools demonstrated different patterns in objective and subjective QoL when compared to those without PD. Both subjective and objective domains are important when measuring QoL of adolescents with PD.

Modelling multi-criteria decision analysis for benchmarking management practices in project management

The link between management practices and worker’s motivations impacting construction productivity is being considered as significant among the research community. This research aimed to identify and analyse the underlying attributes impacting construction productivity from the site management perspective. This research presents a framework designed to analyse and quantify the relative relevance of different drivers in the determination of productivity levels and the degree of effectiveness of potential opportunities for improving performance of overall projects. Owing to the complexity of construction projects and underlying conflicting drivers influencing higher worker’s productivity, the Analytical Hierarchy Process (AHP) is employed to deal with interdependent relationships within a multi-criteria decision-making model. In the analytical approach, the large unstructured decision parameters are identified first and then are broken down into the manageable and measurable components using a top down hierarchical structure. This paper demonstrates an example to illustrate how to empirically analyse and prioritise a set of influencing parameters as selection criteria in devising appropriate management practices to ensure higher productivity vis-à-vis optimum performance of projects.

The age of STEM : educational policy and practice across the world in science, technology, engineering and mathematics

 Across the world STEM (learning and work in Science, Technology, Engineering and Mathematics) has taken central importance in education and the economy in a way that few other disciplines have. STEM competence has become seen as key to higher productivity, technological adaptation and research-based innovation. No area of educational provision has a greater current importance than the STEM disciplines yet there is a surprising dearth of comprehensive and world-wide information about STEM policy, participation, programs and practice.

Effects of sea temperature and stratification changes on seabird breeding success

As apex predators in marine ecosystems, seabirds may primarily experience climate change impacts indirectly, via changes to their food webs. Observed seabird population declines have been linked to climate-driven oceanographic and food web changes. However, relationships have often been derived from relatively few colonies and consider only sea surface temperature (SST), so important drivers, and spatial variation in drivers, could remain undetected. Further, ex - plicit climate change projections have rarely been made, so longer-term risks remain unclear. Here, we use tracking data to estimate foraging areas for 11 black-legged kittiwake Rissa tridac - ty la colonies in the UK and Ireland, thus reducing reliance on single colonies and allowing calculation of colony-specific oceanographic conditions. We use mixed models to consider how SST, the potential energy anomaly (indicating density stratification strength) and the timing of seasonal stratification influence kittiwake productivity. Across all colonies, higher breeding success was associated with weaker stratification before breeding and lower SSTs during the breeding season. Eight colonies with sufficient data were modelled individually: higher productivity was associated with later stratification at 3 colonies, weaker stratification at 2, and lower SSTs at one, whilst 2 colonies showed no significant relationships. Hence, key drivers of productivity varied among colonies. Climate change projections, made using fitted models, indicated that breeding success could decline by 21 to 43% between 1961-90 and 2070-99. Climate change therefore poses a longer-term threat to kittiwakes, but as this will be mediated via availability of key prey species, other marine apex predators could also face similar threats.

Efficient and selectable production of reactive species using a nanosecond pulsed discharge in gas bubbles in liquid

A plasma gas bubble-in-liquid method for high production of selectable reactive species using a nanosecond pulse generator has been developed. The gas of choice is fed through a hollow needle in a point-to-plate bubble discharge, enabling improved selection of reactive species. The increased interface reactions, between the gas-plasma and water through bubbles, give higher productivity. H2O2 was the predominant species produced using Ar plasma, while predominantly NO3- and NO2 were generated using air plasma, in good agreement with the observed emission spectra. This method has nearly 100% selectivity for H2O2, with seven times higher production, and 92% selectivity for NO3-, with nearly twice the production, compared with a plasma above the water.

Total factor productivity and efficiency in Australian colleges of advanced education

The former colleges of advanced education were an important component of the higher education sector in Australia. Uses the Malmquist total factor productivity index to investigate the efficiency and productivity of Australian colleges of advanced education during the 1980s. The results from this analysis indicate that these colleges recorded modest growth in technical change and total factor productivity, but did not fare all that well in terms of growth in technical and scale efficiency during the 1980s. As a group, however, the former colleges of advanced education had attained high levels of technical and scale efficiency.

TQM and labour productivity in Jordanian industrial companies

Reports on research to determine the degree of application of total quality management (TQM) philosophy and practices in industrial corporations in Jordan. Uses primary and secondary empirical data to examine the link between TQM and labour productivity. Survey responses were classified into two groups: high-TQM implementation and low-TQM implementation. Found that mean labour productivity measurements for high-TQM companies were significantly higher than for low-TQM companies over the period 1993-1998. Also, mean growth rates of labour productivity measurements for companies with high-level TQM were higher than for those with low-level TQM during this period. Regression analysis demonstrated a statistically significant positive relationship between TQM and labour productivity.

Gross margins in Australian mohair enterprises and relationships with farm inputs, productivity and mohair quality

In the absence of financial information on Australian mohair enterprises we aimed to determine the gross margins (per dry sheep equivalent, DSE) and their relationships with farm inputs, productivity and mohair quality in Australian mohair enterprises. Using established Victorian Farm and Sheep Monitor Project protocols we collected data for the financial years 200405, 200506 and 200607 from farmers in south-eastern Australia and made comparisons with data from wool enterprises of similar farm area. Over 3 years the financial returns from mohair exceeded that from wool in terms of $/DSE ($23.0 v. 11.3) and $/ha ($132 v. $116). This result was achieved despite the mohair enterprises grazing their goats far less intensively compared with the grazing intensity of sheep (5.9 v. 10.311.1 DSE/ha) and by using far less phosphate fertiliser than used in the wool enterprises (2.2 v. 4.66.1 kg P/ha). These differences were counterbalanced by higher prices for mohair compared with fine wool ($13.15/kg v. $8.35/kg clean fibre). Gross margin for the mohair enterprise did not increase as stocking rate increased. Income from mohair sales declined as the proportion of does in the flock increased. Increasing the proportion of does in the flock was associated with a decline in the average price of mohair ($16/kg greasy at 42% does to $8/kg greasy at 83% does in the flock). This decline was closely associated with the increasing proportion of the total amount of mohair coarser than 34.0 μm (either fine hair or hair) plus stained mohair. The variation in profitability between farms indicates significant scope for many mohair enterprises to increase profit. A focus on producing finer quality mohair will increase mohair profitability.

The `knowledge-intensive development' agenda and equitable access to knowledge: higher education in Ethiopia

In light of the normative assumption of the role of knowledge in economic productivity and in response to strong exogenous policy orientations (mainly from the World Bank), the government of Ethiopia has restructured and expanded the higher education (HE) subsystem since the late 1990s. In critically analysing selected policy documents, this article seeks to understand the seemingly unlinked agendas of strengthening the role of HE in supporting the knowledge-intensive development agenda and the representation of the problem of inequality in access to and success in HE. It has been shown that the economic value of knowledge has been echoed in the reforms of Ethiopia, and that the problem of inequality has been superficially represented just as inequality of access while serious challenges that hinder participation and success of women, non-traditional students and ethnically and regionally disadvantaged groups remain unchallenged. Hence, the analysis indicates that under a situation of unequal opportunity to knowledge, the knowledge-intensive development agenda appears to be empty policy rhetoric.

Indices for cashmere fleece competition and across farm comparisons: The role of staple length in identifying goats of higher cashmere production

A single focus on mean fibre diameter (MFD, μm) as the definition of cashmere quality overlooks the effects of fibre length, softness and fibre curvature on cashmere processing, textile quality and consumer acceptance. Many farmers overlook the importance of cashmere staple length (SL, cm) in their fleece assessments. We aimed to determine the importance of SL in comparison with MFD when evaluating cashmere production and to identify how across farm comparisons of cashmere fleeces can be objectively undertaken. A sample of 1244 commercial cashmere fleeces from goats originating from many Australian farms was used. Least squares models, relating the logarithm of clean cashmere production (CCMwt, g) to MFD and SL, were fitted. Six years of data from the Australian cashmere industry between farm fleece competitions were analysed to determine the relation between CCMwt and MFD. In the research flocks, adjusting CCMwt of individual goats across farms for MFD only accounted for 2% of the variance, whereas SL accounted for 39% of the variance. The least squares additive model involving only SL was: log10(CCMwt)=1.570+0.06010×SL. Thus CCMwt was proportional to: 100.06010×SL=1.1484SL. It was appropriate to adjust CCMwt for SL by a factor 1/1.1484(SL-SL0) where SL0 is a standard SL of 7.5cm. The between farm index for cashmere weight equals: cleancashmerestaplelengthindex=2.823×CCMwt/1.1484SL. For industry fleece competitions, regression analysis indicated that there was no association between cashmere production and MFD (P=0.81), similar to the research data. Adjusting CCMwt for MFD in across farm comparison and fleece competitions appears to be ineffective. For farm comparisons and in fleece competitions it is important to assess cashmere SL. The use of the Clean Cashmere Staple Length Index will provide a more robust comparison of cashmere productivity between farms as it is an indirect indicator of desirable skin secondary follicle development. The results have application in development projects where obtaining a cashmere MFD test is costly or unavailable. © 2013 Elsevier B.V.

Output and labor productivity in organized manufacturing: a panel cointegration analysis for India

One of the policy puzzles faced in India during the last two and half decades has been the weak association between output and labor markets, particularly in the manufacturing sector. In this research, we investigate the long-run relationship between output, labor productivity and real wages in the case of organized manufacturing. We adjust the measure of labor productivity incorporating bottlenecks, such as lack of infrastructure, access to external finance, and labor regulations, which all may influence labor market outcomes. Using panel data from seventeen manufacturing industries, we establish long-run dynamics for the output-labor productivity-real wages series over a period of nearly three decades. We employ recently developed panel unit root and cointegration tests for cross-sectional dependence to incorporate heterogeneity across industries. Long-run elasticities are generally found to be low for labor productivity compared to real wages due to the changes in manufacturing output. There are variations across industries within the manufacturing sector for the effects of the labor market on manufacturing output. In some industries, lower wages are associated with higher output, and the reason for the positive relationship in other industries could be due to workers' bargaining power.