Personality, behavioural and affective characteristics of hazardous drinkers

The aim of this study was to investigate the influence of appetitive and aversive motivation on hazardous drinking behaviour by drawing on Reinforcement Sensitivity Theory (RST). A between-groups design examined differences between hazardous drinkers and matched controls on self-report and behavioural appetitive and aversive motivation. The relationship between motivational processes and changes in affective states following behavioural task performance was also examined. Data from 27 hazardous drinkers (M = 21.88 years, SD = 3.29) and 27 gender and age matched controls (M = 21.85 years, SD = 4.08) were utilised. The Card Arranging Reward Responsivity Objective Test (CARROT) assessed behavioural appetitive motivation and the computerised Q-TASK provided an index of behavioural aversive motivation. Self-report appetitive and aversive motivation was measured using the Sensitivity to Punishment and Reward Questionnaire (SPSRQ). Brief scales tapping state positive and negative affect were also administered. Hazardous drinkers were significantly higher than controls on self-report but not behavioural measures of appetitive motivation. Results also indicated that hazardous drinkers reported significantly higher levels of negative affect. These data suggest that hazardous drinkers are characterised by high trait appetitive motivation and state negative affect. It was suggested that RST may provide a useful framework for understanding both the appetitive and aversive motivational processes involved in drinking behaviour.

Autonomous underwater vehicles in a hazardous non-deterministic environment

This research investigated the cooperation of multi underwater robots to perform a task. This combined engineering design, electronics and consensus control to create systems capable of achieving the task. Challenges such as underwater radio communications were researched and a simulation framework was created and tested on virtual and real systems.

A hazardous substance exposure prevention rating method for intervention needs assessment and effectiveness evaluation: the small business exposure index

Aims This paper describes the refinement and adaptation to small business of a previously developed method for systematically prioritizing needs for intervention on hazardous substance exposures in manufacturing worksites, and evaluating intervention effectiveness. Methods We developed a checklist containing six unique sets of yes/no variables organized in a 2 × 3 matrix of exposure potential versus exposure protection at three levels corresponding to a simplified hierarchy of controls: materials, processes, and human interface. Each of the six sets of indicator variables was reduced to a high/moderate/low rating. Ratings from the matrix were then combined to generate an exposure prevention 'Small Business Exposure Index' (SBEI) Summary score for each area. Reflecting the hierarchy of controls, material factors were weighted highest, followed by process, and then human interface. The checklist administered by an industrial hygienist during walk-through inspection (N = 149 manufacturing processes/areas in 25 small to medium-sized manufacturing worksites). One area or process per manufacturing department was assessed and rated. A second hygienist independently assessed 36 areas to evaluate inter-rater reliability. Results The SBEI Summary scores indicated that exposures were well controlled in the majority of areas assessed (58% with rating of 1 or 2 on a 6-point scale), that there was some room for improvement in roughly one-third of areas (31% of areas rated 3 or 4), and that roughly 10% of the areas assessed were urgently in need of intervention (rated as 5 or 6). Inter-rater reliability of EP ratings was good to excellent (e.g., for SBEI Summary scores, weighted kappa = 0.73, 95% CI 0.52–0.93). Conclusion The SBEI exposure prevention rating method is suitable for use in small/medium enterprises, has good discriminatory power and reliability, offers an inexpensive method for intervention needs assessment and effectiveness evaluation, and complements quantitative exposure assessment with an upstream prevention focus.

Occupational skill level and hazardous exposures among working Victorians

This paper examines the patterning of exposures to occupational hazards in relation to occupational skill level as a proxy for pay rate, testing the general hypothesis that exposures to occupational hazards increase in prevalence with decreasing skill level. A population-based telephone survey was conducted on a random sample of working Victorians (N = 1,101). A set of 10 indicators of exposure to occupational hazards were analysed individually and as a summary scale in multivariate regression models. A significant increasing trend in hazardous working conditions from the highest to lowest occupational skill level was observed, with those in lower skill level jobs twice as likely to be exposed as those at the highest skill level. This overall trend was driven primarily by higher exposure in the middle skill level group (technicians and skilled trades) as well as the lowest (labourers and elementary clerical), the two main bluecollar groups. Findings provided partial support for the hypothesised relationship.

Cleanup worker exposures to hazardous chemicals at a former nuclear weapons plant : piloting of an exposure surveillance system

Cleanup of former U.S. Department of Energy (DOE) nuclear weapons production facilities involves potential exposures to various hazardous chemicals. We have collaboratively developed and piloted an exposure database and surveillance system for cleanup worker hazardous chemical exposure data with a cleanup contractor at the Rocky Flats Environmental Technology Site (RFETS). A unique system feature is the incorporation of a 34-category work task-coding scheme. This report presents an overview of the data captured by this system during development and piloting from March 1995 through August 1998. All air samples collected were entered into the system. Of the 859 breathing zone samples collected, 103 unique employees and 39 unique compounds were represented. Breathing zone exposure levels were usually low (86% of breathing zone samples were below analytical limits of detection). The use of respirators and other exposure controls was high (87 and 88%, respectively). Occasional high-level excursions did occur. Detailed quantitative summaries are provided for the six most monitored compounds: asbestos, beryllium, carbon tetrachloride, chromium, lead, and methylene chloride. Task and job title data were successfully collected for most samples, and showed specific cleanup activities by pipe fitters to be the most commonly represented in the database. Importantly, these results demonstrate the feasibility of the implementation of integrated exposure database and surveillance systems by practicing industrial hygienists employed in industry as well as the preventive potential and research uses of such systems. This exposure database and surveillance system--the central features of which are applicable in any industrial work setting--has enabled one of the first systematic quantitative characterizations of DOE cleanup worker exposures to hazardous chemicals.

Alcohol management practices in community football clubs: association with risky drinking at the club and overall hazardous alcohol consumption

Across the world, it has been estimated that approximately 270 million people participate in community football clubs. However, the community sports club setting is associated with high levels of risky alcohol consumption. The study examined if sporting club alcohol management practices are associated with risky consumption of alcohol by club members while at the club, and also whether such consumption is directly and indirectly associated with club member overall hazardous alcohol consumption.

Near-surface distributions of soil water and water repellency under three effluent irrigation schemes in a blue gum (Eucalyptus globulus) plantation

Water repellent soils are difficult to irrigate and susceptible to preferential flow, which enhances the potential for accelerated leaching to groundwater of hazardous substances. Over 5 Mha of Australian soil is water repellent, while treated municipal sewage is increasingly used for irrigation. Only if a critical water content is exceeded will repellent soils become wettable. To avoid excessive loss of water from the root zone via preferential flow paths, irrigation schemes should therefore aim to keep the soil wet enough to maintain soil wettability. Our objective was to monitor the near-surface water content and water repellency in a blue gum (Eucalyptus globulus) plantation irrigated with treated sewage. The plantation's sandy soil surface was strongly water repellent when dry. For 4 months, three rows of 15 blue gum trees each received no irrigation, three other rows received 50% of the estimated potential water use minus rainfall, and three more rows received 100%. During this period, 162 soil samples were obtained in three sampling rounds, and their water content (% dry mass) and degree of water repellency determined. Both high and low irrigation effectively wetted up the soil and eliminated water repellency after 2 (high) or 4 (low) months. A single-peaked distribution of water contents was observed in the soil samples, but the water repellency distribution was dichotomous, with 44% extremely water-repellent and 36% wettable. This is consistent with a threshold water content at which a soil sample changes from water repellent to wettable, with spatial variability of this threshold creating a much wider transition zone at the field scale. We characterized this transition zone by expressing the fraction of wettable samples as a function of water content, and demonstrated a way to estimate from this the wettable portion of a field from a number of water content measurements. To keep the plantation soil wettable, the water content must be maintained at a level at which a significant downward flux is likely, with the associated enhanced leaching. At water contents with negligible downward flux, the field is water repellent, and leaching through preferential flow paths is likely. Careful management is needed to resolve these conflicting requirements.

Narcotics Anonymous participation and changes in substance use and social support

In Victoria (a southern Australian state) in 1995, Narcotics Anonymous had a small but growing membership providing an opportunity to study the early experience of new self-help members. Ninety-one new members were interviewed and 62 (68%) were reinterviewed after 12 months. Three measures of self-help participation were examined: service role involvement, step work, and stable meeting attendance. Lower prior involvement in treatment services and greater participation in self-help predicted subsequent self-help participation. Higher levels of secondary school education predicted service role involvement and longer periods in stable meeting attendance. Higher self-help participation through the 12 months prior to follow-up was associated with lower levels of hazardous alcohol use and higher emotional support at reinterview. Multivariate regression analysis suggested stable self-help meeting attendance and step work continued to predict reductions in hazardous alcohol use and improvements in social support, after controlling for a range of alternative predictors.

Waste production simulation for building deconstruction projects

The recently erected concept of building deconstruction has significantly promoted building components and materials reuse and recycling where building is carefully dismantled into reusable parts. Current research and practices of building deconstruction mainly focus on issues of process before and during the deconstruction such as hazardous material detection, deconstruction design and deconstruction technology. The issues after the deconstruction project are rarely considered. Waste reuse and recycling are enabled through deconstruction yet not practically achieved, and especially the demands of waste building components and materials are hard to appear and match the actual waste production in a building deconstruction project. To deal with this awkward situation, the waste production needs to be conducted in a demand-oriented way. It needs to be thoughtfully planned and scheduled prior to the physical deconstruction as an essential portion of deconstruction project planning and scheduling. Furthermore, the relationship between waste production and structural characteristics of the building creates a serious consideration affecting a deconstruction plan. As a result, a waste production simulation will facilitate waste reuse and recycling in a deconstruction project. It serves as a crucial section of deconstruction planning and design. This research aims to describe the concept of waste production simulation and investigate various management and technical aspects of waste production simulation for building deconstruction projects.

Potential microbial and chemical hazards to waterbirds at the Western Treatment Plant

The Western Treatment Plant, a major sewage treatment plant west of Melbourne, Australia, is widely regarded as a significant conservation site for waterbirds. But experiences from various parts of the world suggest that sewage can also be hazardous to waterbirds, and has probably been responsible for mass-kill events. The intent of this contribution is to raise awareness about the potential for adverse impacts of sewage treatment plants on waterbirds, and to stimulate debate on the issue, with the ultimate objective of developing appropriate management strategies to mitigate the risk of mass kills.

Fuzzy haptic augmentation for telerobotic stair climbing

Teleoperated robotic systems provide a valuable solution for the exploration of hazardous environments. The ability to explore dangerous environments from the safety of a remote location represents an important progression towards the preservation of human safety in the inevitable response to such a threat. While the benefits of removing physical human presence are clear, challenges associated with remote operation of a robotic system need to be addressed. Removing direct human presence from the robot's operating environment introduces telepresence as an important consideration in achieving the desired objective. The introduction of the haptic modality represents one approach towards improving operator performance subject to reduced telepresence. When operating in an urban environment, teleoperative stair climbing is not an uncommon scenario. This work investigates the operation of an articulated track mobile robot designed for ascending stairs under teleoperative control. In order to assist the teleoperator in improved navigational capabilities, a fuzzy expert system is utilised to provide the teleoperator with intelligent haptic augmentation with the aim of improving task performance.

OzBot TM - Haptic augmentation of a teleoperated robotic platform for search and rescue operations

A continued increase in computing power, sensor capability, software functionality, immersive interfaces and hardware modularity has given robot designers seemingly endless potential in the area of mobile robotics.  While some mobile robotic system designers are focusing on expensive, full-featured platforms, developers are realising the advantages of emerging technology in providing small, low-cost mobile reconnaissance vehicles as expendable teleoperated robotic systems.  The OzBot^TM mobile reconnaissance platform presents one such system.  The design objectives of the OzBot^TM platform focus on the development of inexpensive, lightweight carry-case sized robots for search and rescue operations, law enforcement scenarios and hazardous environment inspection.  The incorporation of Haptic augmentation provides the teleoperator with improved task immersion for an outdoor search and rescue scenario.  Achieved in cooperation with law enforcement agencies within Australia, this paper discusses the performance of the first four revisions of the OzBot^TM platform.