Classification of team sport activities using a single wearable tracking device

Wearable tracking devices incorporating accelerometers and gyroscopes are increasingly being used for activity analysis in sports. However, minimal research exists relating to their ability to classify common activities. The purpose of this study was to determine whether data obtained from a single wearable tracking device can be used to classify team sport-related activities. Seventy-six non-elite sporting participants were tested during a simulated team sport circuit (involving stationary, walking, jogging, running, changing direction, counter-movement jumping, jumping for distance and tackling activities) in a laboratory setting. A MinimaxX S4 wearable tracking device was worn below the neck, in-line and dorsal to the first to fifth thoracic vertebrae of the spine, with tri-axial accelerometer and gyroscope data collected at 100Hz. Multiple time domain, frequency domain and custom features were extracted from each sensor using 0.5, 1.0, and 1.5s movement capture durations. Features were further screened using a combination of ANOVA and Lasso methods. Relevant features were used to classify the eight activities performed using the Random Forest (RF), Support Vector Machine (SVM) and Logistic Model Tree (LMT) algorithms. The LMT (79-92% classification accuracy) outperformed RF (32-43%) and SVM algorithms (27-40%), obtaining strongest performance using the full model (accelerometer and gyroscope inputs). Processing time can be reduced through feature selection methods (range 1.5-30.2%), however a trade-off exists between classification accuracy and processing time. Movement capture duration also had little impact on classification accuracy or processing time. In sporting scenarios where wearable tracking devices are employed, it is both possible and feasible to accurately classify team sport-related activities.

An adaptive orientation misalignment calibration method for shoulder movements using inertial sensors : a feasibility study

Qualitative assessment of the progress in physical rehabilitation largely depends on accurate measurement of the range of movements and other kinematic parameters. In clinical practice, wearable inertial sensors have proved to be a potential candidate for such measurements, over the traditional marker based optical systems due to cost and space considerations. The accuracy of wearable sensors have a significant dependence on the initial orientation calibration and the assumption that the sensor will not slip or move with respect to the attached limb. This article introduces a novel calibration algorithm to correct initial orientation misalignment, as well as to track and correct subsequent alignment errors progressively throughout the experiment. The theoretical assertions are validated through controlled experiments with simulated accelerometer and gyroscope measurements.

Smartwatch: performance evaluation for long-term heart rate monitoring

Recent advancement in wearable technologies, particularly smart watches embedded with powerful processors, memory subsystems with various built-in sensors such as ac-celerometer, gyroscope and optical sensor in one single package has opened a whole new application space. One of the main applications of interest is the monitoring of movement patterns, heart rate, ECG and PPG particularly for longer duration's in natural environments. In this study, we conducted a performance evaluation on the optical heart rate sensor of the smartwatch with respect to the commonly used ECG and PPG devices. Results have shown that the heart rate acquired from the smartwatch is reasonably accurate with a high degree of correlation. Further, we conducted a preliminary exerise to evaluate sleep quality using the heart rate readings and accelerometer readings captured from the smartwatch and compared with a commercially available and clinically used non-contact sleep sensor, RESMED S+.