Biotic effects of climate change in urban environments: The case of the grey-headed flying-fox (Pteropus poliocephalus) in Melbourne, Australia

Urban climates are known to differ from those of the surrounding rural areas, as human activities in cities lead to changes in temperature, humidity and wind regimes. These changes can in turn affect the geographic distribution of species, the behaviour of animals and the phenology of plants. The grey-headed flying-fox (Pteropus poliocephalus) is a large, nomadic bat from eastern Australia that roosts in large colonies known as camps. Historically a warm temperate to tropical species, P. poliocephalus recently established a year-round camp in the Royal Botanic Gardens Melbourne. Using a bioclimatic analysis, we demonstrated that on the basis of long-term data, Melbourne does not fall within the climatic range of other P. poliocephalus camp sites in Australia. Melbourne is drier than other summer camps, and cooler and drier than other winter camps. The city also receives less radiation, in winter and annually, than the other summer and winter camps of P. poliocephalus. However, we found that temperatures in central Melbourne have been increasing since the 1950s, leading to warmer conditions and a reduction in the number of frosts. In addition, artificial watering of parks and gardens in the city may contribute the equivalent of 590 mm (95% CI: 450–720 mm) of extra rainfall per year. It appears that human activities have increased temperatures and effective precipitation in central Melbourne, creating a more suitable climate for camps of the grey-headed flying-fox. As demonstrated by this example, anthropogenic climate change is likely to complicate further the task of conserving biological diversity in urban environments.

Field metabolic rate and body water turnover of the red fox (Vulpes vulpes) in Australia

We measured the daily energy expenditure of free-living red foxes Vulpes vulpes occupying a temperate region of New South Wales, Australia. Field metabolic rate (FMR) and body water turnover were estimated using doubly labelled water. In autumn, male body mass ranged from 5 to 6.1 kg (mean 5.6 kg) and their FMRs averaged 2328 kJ/day. Female body mass in autumn ranged from 4.9 to 6.6 kg (mean 5.4 kg) and their FMRs averaged 1681 kJ/day. Body water influx for males and females was 314 and 251 mL/day, respectively. Body composition of each fox was analysed after the field measurements and revealed a significant correlation between body water content, as estimated from tritiated water space, and body lipids (r² = 0.72). This supports the use of body water determination as a potentially non-destructive method to gauge body condition.

Effects of a fox removal program on small and medium-sized mammal population dynamics within the Anglesea Heathlands, Victoria

This thesis assessed the diet of foxes within the ALCOA lease area of Anglesea to determine which native and introduced species foxes were eating. Results showed that Swamp Wallaby was regularly eaten but many other mammals, birds, insects and reptiles were also consumed. The response of native mammals to seasonal fox removal was also determined.

Conditioned taste aversion reduces fox depredation on model eggs on beaches

Context:  Conditioned taste aversion (CTA) is induced by an association of a food item with a negative experience, such as illness, which causes animals to avoid subsequent consumption of that particular food item. Inducing CTA may help reduce depredation rates of threatened fauna where predator population control is undesirable, impractical or unsuccessful.

Aims:  We investigated whether CTA could be induced among foxes (Vulpes vulpes) to model eggs which mimicked those of the threatened hooded plover (Thinornis rubricollis).

Methods:   Model eggs treated with a potential CTA-inducing chemical (sodium carbonate) and control eggs free of the agent were exposed to fox depredation for 28 days to simulate a hooded plover incubation period. To investigate whether CTA would persist in wild foxes, we implemented a part-time agent treatment (an initial 14 day exposure period of model eggs with the CTA agent followed by a second 14 day period when model eggs were free of the agent).

Key results:  Similar intervals to the first depredation event were found for all model eggs regardless of treatment. After the first depredation event by foxes, the rate and likelihood of fox depredation was significantly lower in treated eggs than in control eggs. The likelihood or rate of depredation across the three treatments did not differ between the first and second periods.

Conclusions: Our results suggest that during an exposure period of at least 28 days, CTA can be induced in wild foxes to eggs on beaches. Our results also suggest that 14 days may be insufficient time for wild foxes to develop a lasting CTA to familiar food items such as eggs.

Implications:  Treatment of eggs with a CTA-inducing chemical may present a viable alternative to traditional predator control techniques for hooded plovers, as well as other ground-nesting birds, provided that an extended exposure to the CTAinducing agent occurs.

Hoarding of pulsed resources : temporal variations in egg-caching by arctic fox

Resource pulses are common in various ecosystems and often have large impacts on ecosystem functioning. Many animals hoard food during resource pulses, yet how this behaviour affects pulse diffusion through trophic levels is poorly known because of a lack of individual-based studies. Our objective was to examine how the hoarding behaviour of arctic foxes (Alopex lagopus) preying on a seasonal pulsed resource (goose eggs) was affected by annual and seasonal changes in resource availability. We monitored foraging behaviour of foxes in a greater snow goose (Chen caerulescens atlanticus) colony during 8 nesting seasons that covered 2 lemming cycles. The number of goose eggs taken and cached per hour by foxes declined 6-fold from laying to hatching, while the proportion of eggs cached remained constant. In contrast, the proportion of eggs cached by foxes fluctuated in response to the annual lemming cycle independently of the seasonal pulse of goose eggs. Foxes cached the majority of eggs taken (> 90%) when lemming abundance was high or moderate but only 40% during the low phase of the cycle. This likely occurred because foxes consumed a greater proportion of goose eggs to fulfill their energy requirement at low lemming abundance. Our study clearly illustrates a behavioural mechanism that extends the energetic benefits of a resource pulse. The hoarding behaviour of the main predator enhances the allochthonous nutrients input brought by migrating birds from the south into the arctic terrestrial ecosystem. This could increase average predator density and promote indirect interactions among prey.

Cache and carry : hoarding behavior of arctic fox

Food-hoarding animals are expected to preferentially cache items with lower perishability and/or higher consumption time. We observed arctic foxes (Alopex lagopus) foraging in a greater snow goose (Anser caerulescens atlanticus) colony where the main prey of foxes consisted of goose eggs, goslings, and lemmings (Lemmus and Dicrostonyx spp.). We recorded the number of prey consumed and cached and the time that foxes invested in these activities. Foxes took more time to consume a goose egg than a lemming or gosling but cached a greater proportion of eggs than the other prey type. This may be caused by the eggshell, which presumably decreases the perishability and/or pilfering risk of cached eggs, but also increases egg consumption time. Arctic foxes usually recached goose eggs but rarely recached goslings or lemmings. We tested whether the rapid-sequestering hypothesis could explain this recaching behavior. According to this hypothesis, arctic foxes may adopt a two-stage strategy allowing both to maximize egg acquisition rate in an undefended nest and subsequently secure eggs in potentially safer sites. Foxes spent more time carrying an egg and traveled greater distances when establishing a secondary than a primary cache. To gain further information on the location and subsequent fate of cached eggs, we used dummy eggs containing radio transmitters. Lifespan of primary caches increased with distance from the goose nest. Secondary caches were generally located farther from the nest and had a longer lifespan than primary caches. Behavioral observations and the radio-tagged egg technique both gave results supporting the rapid-sequestering hypothesis.

Common ravens raid arctic fox food caches

Cache recovery is critical for evolution of hoarding behaviour, because the energy invested in caching may be lost if consumers other than the hoarders benefit from the cached food. By raiding food caches, animals may exploit the caching habits of others, that should respond by actively defending their caches. The arctic fox (Alopex lagopus) is the main predator of lemmings and goose eggs in the Canadian High Arctic and stores much of its prey in the ground. Common ravens (Corvus corax) are not as successful as foxes in taking eggs from goose nests. This generalist avian predator regularly uses innovation and opportunism to survive in many environments. Here, we provide the first report that ravens can successfully raid food cached by foxes, and that foxes may defend their caches from ravens.

Population genetic structure of the red fox (Vulpes vulpes) in the UK

The red fox (Vulpes vulpes) is common and widely distributed within the UK. It is a carrier or potential carrier of numerous zoonotic diseases. Despite this, there are no published reports on the population genetics of foxes in Britain. In this study, we aim to provide an insight into recent historical movement of foxes within Britain, as well as a current assessment of the genetic diversity and gene flow within British populations. We used 14 microsatellite markers to analyse 501 red fox samples originating from England, southern Scotland and northern France. High genetic diversity was evident within the sample set as a whole and limited population genetic structure was present in British samples analysed. Notably, STRUCTURE analysis found support of four population clusters, one of which grouped two southern England sampling areas with the nearby French samples from Calais, indicating recent (post-formation of the Channel) mixing of British and French populations. This may coincide with reports of large-scale translocations of foxes into Britain during the nineteenth century for sport hunting. Other STRUCTURE populations may be related to geographic features or to cultural practices such as fox hunting. In addition, the two British urban populations analysed showed some degree of differentiation from their local rural counterparts.

Effect of the manufacturing process on the interlaminar fracture toughness of 2/2 twill weave fabric carbon/epoxy composites

A 2/2 twill weave fabric carbon fibre reinforced epoxy matrix composite MTM56/CF0300 was used to investigate the effect of different manufacturing processes on the interlaminar fracture toughness. Double cantilever beam tests were performed on composites manufactured by hot press, autoclave and 'Quickstep' processes. The 'Quickstep' process was recently developed in Perth, Western Australia for the manufacture of advanced composite components. The values of the mode I critical strain energy release rate (G1d were compared and the results showed that the composite specimens manufactured by the autoclave and the 'Quickstep' process had much higher interlaminar fracture toughness than the specimen produced by the hot press. When compared to specimens manufactured by the hot press, the interlaminar fracture toughness values of the Quickstep and autoclave samples were 38% and 49% higher respectively. The 'Quickstep' process produced composite specimens that had comparable interlaminar fracture toughness to autoclave manufactured composites. Scanning electron microscopy (SEM) was employed to study the topography of the mode I interlaminar fracture surface and dynamic mechanical analysis (DMA) was performed to investigate the fibre/matrix interphase. SEM micrography and DMA spectra indicated that autoclave and 'Quickstep' produced composites with stronger fibre/matrix adhesion than hot press.

An experimental study of low velocity impact response in 2/2 twill weave composite laminates manufactured by a novel fabrication process

A novel fabrication process for advanced composite components—the QuicktepTM process was described. 2/2 twill weave MTM56/CF0300 carbon epoxy composite laminates were manufactured by the Quickstep and the autoclave processes. The response of these laminates to drop-weight low velocity impact at energy levels ranging from 5 to 30 J was investigated. It was found that the laminates fabricated by the Quickstep had better impact damage tolerance than those fabricated by the autoclave. Optical microscopy revealed extensive matrix fracture in the center of the backside of the autoclave laminates indicating the more brittle property of the epoxy matrix cured by the autoclave process. Interfacial shear strength (IFSS) for two composite systems were measured by micro–debond experiments. The MTM56/CF0300 material cured by the Quickstep showed stronger fibre matrix adhesion. Since the thickness and density of the impact targets produced by two processes were different, finite element analysis (FEA) was performed to study the effect of these factors on the impact response. The simulation results showed that the difference in thickness and density affects the stress distribution under impact loading. Higher thickness and lower density caused by processing lead to less endurance to drop weight impact loading. Therefore the better performance of Quickstep laminates under impact loading was not due to the thickness and density change, but resulted from stronger mechanical properties.

Characterization and analysis of delamination fracture and nanocreep properties in carbon epoxy composites manufactured by different processes

Delamination resistance and nanocreep properties of 2/2 twill weave carbon epoxy composites manufactured by hot press, autoclave, and Quickstep^TM process are characterized and analyzed. Quickstep is a fluid filled, balanced pressure heated floating mold technology, which is recently developed in Perth, Western Australia for the manufacture of advanced composite components. Mode I and Mode II interlaminar fracture toughness tests, and nanoindentation creep tests on matrix materials show that the fast ramp rate of the Quickstep process provides mechanical properties comparable to that of autoclave at a lower cost for composite manufacturing. Low viscosity during ramping process and good fiber wetting are believed to be the reasons that this process produces composites with high delamination and creep-resistant properties. Nanocreep properties are analyzed using a Kelvin–Voigt model.

Change in the diet of sooty owls (Tyto tenebricosa) since European settlement: from terrestrial to arboreal prey and increased overlap with powerful owls

The current diet of the sooty owl (Tyto tenebricosa) was determined by analysing freshly regurgitated pellets collected beneath their roosting sites in East Gippsland, Victoria. Comparisons were then made with: (i) prehistoric and historic diet from bone deposits found in cave roosts, and (ii) diet of a sympatric owl species, the powerful owl (Ninox strenua). Sooty owls consumed a large array of terrestrial mammal species before European settlement, but only three terrestrial species were detected in their current diet, a reduction of at least eight species since European settlement. To compensate, sooty owls have increased their consumption of arboreal prey from 55% to 81% of their diet. Arboreal species are also a major component of the powerful owl diet and this prey shift by sooty owls has increased dietary overlap between these two species. Predation by foxes (Vulpes vulpes) and other feral species is likely to have reduced the amount of terrestrial prey available to sooty owls since European settlement. Investigation of changes in the diet of sooty owls may offer a unique monitoring system for evaluating the ability of fox-control strategies to influence increases in numbers of critical-weight-range mammals.

Home range, habitat selection and diet of foxes (vulpes vulpes) in a semi-urban riparian environment

Between 2000 and 2002 the home range, habitat selection and diet of foxes were examined in the Dandenong Creek Valley, Melbourne, Australia. The mean home range was 44.6 ha (range 19.2–152.6 ha). A significant selection towards blackberry and gorse used as diurnal shelter was found during the day with an active avoidance of less structurally complex vegetation types. Although there was obvious selection of certain habitats, the diet of the foxes was highly general and opportunistic and thus offers little potential as a factor to manipulate in order to reduce fox abundance. Given the strong preference for blackberry and gorse as a shelter resource, a habitat-manipulation strategy is suggested whereby patches of blackberry and gorse are removed and replaced with less structurally complex vegetation. Such a strategy has the potential to influence the density of foxes in semi-urban riparian environments such as those discussed in this study.

Finite element modelling of metallic tubular crash structures with an explicit code

Numerous experimental studies have been carried out to investigate the collapse of tubular metallic crash structures under axial compression. Some simple theoretical models have been developed but these often assume one type of progressive collapse, which is not always representative of the real situation. Finite Element (FE) models, when further refined, have the potential to predict the actual collapse mode and how it influences the load-displacement and energy absorption characteristics. This paper describes an FE modelling investigation with the explicit code LS−DYNA. An automatic mesh generation programme written by the authors is used to set up shell and solid element tube models. Mesh specification issues and features relating to the contact and friction models are discussed in detail. The crush modes, load-deflection characteristics and energy absorption values found in the simulations are compared with a reasonable degree of correlation to those observed in a physical testing programme; however, improvements are still required.