Effect of hydrogen/air flow rates and scan rate on the flame ionisation detection response of phopholipids, and their quantitative and qualitative analysis by Iatroscan (Mark‐6s) TLC‐FID

The combined effect of scan speed, hydrogen and air flow rates on the flame ionization detection (FID) peak response of phospholipid classes has been studied to determine the optimum levels of these parameters. The phospholipid composition of different types of commercial lecithins, as well as lecithins combined with fish oils, has been analyzed by Iatroscan TLC‐FID Mark‐6s under optimized conditions. An air flow rate of 2 L/min, a hydrogen flow rate of 150–160 mL/min, and a scan speed of 30 s/rod seem to be the ideal conditions for scanning phospholipids with complete pyrolysis in the flame in the Mark‐6 model. Increasing the scan speed rapidly decreased the FID response. A hydrogen flow rate as high as 170 mL/min could be used at relatively low air flow rates (&#x003C2 L/min) and the response declined when both air flow rate and hydrogen flow rate increased simultaneously. Both linear and curvilinear relationships had highly significant correlations (p&#x003C0.01) with the sample load. Time course reactions, including the hydrolysis of phosphatidylserine using enzymes, can be successfully monitored by the Iatroscan TLC‐FID Chromarod system.

Qualitative and quantitative analysis of lipid classes in fish oils by thin-layer chromatography with an Iatroscan flame Ionization detector (TLC-FID) and liquid chromatography with an evaporative light scattering detector (LC-ELSD)

Combined effects of hydrogen and air flow rates on the peak response of selected neutral lipid classes (triacylglycerol, diacylglycerol, monoacylglycerol, free fatty acids, and ethyl esters) were studied to optimize and calibrate the Iatroscan Mk-6s Chromarod system for the qualitative and quantitative analysis of lipid classes by thin-layer chromatography (TLC) with flame ionization detection in fish oil during the transesterification process. Air flow rate of 2 L/min, hydrogen flow rate of 150-160 mL/min, and scan rate of 30 s/rod were found to be the optimum conditions. All samples were also analyzed by high performance liquid chromatography (HPLC) with evaporative light scattering detection. Quantitative results obtained by TLC with the flame ionization detection method were comparable to those obtained from HPLC with evaporative light scattering detection.

Only thin smoke without flame

Hardy's short stories have been relatively neglected by critics. This thesis argues for their reconsideration and proper recognition as essential components of Hardy's achievement. Examines his creation of a fictional "Wessex" with himself as conservator, but suggests that their subversive ideologies touching on modern themes, make him a "proto-modern" writer.

Triethyl and tributyl phosphite as flame-retarding additives in Li-ion batteries

This study examined the influence of triethyl and tributyl phosphite (TEP and TBP) additives on the electrochemical performance of lithium-ion cells. The cell performance of the TEP- and TBP-containing electrolytes was evaluated by cyclic voltammetry, thermogravimetric analysis, electrochemical impedance spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy. The flammability of the electrolytes was also investigated by measuring the self-extinguishing time of the electrolytes. The results showed that the TEP and TBP additives suppressed the flammability of the electrolyte, with a significant improvement in cell performance observed for the TEP additive. In addition, TEP and TBP additives improved the thermal stability of the battery and its electrochemical cell performance. Overall, 5 wt% TEP and TBP can be used as a flame-retarding additive to improve the cell performance of Li-ion batteries due to the decrease in cell impedance and SEI formation.

Effect of flame-retarding additives on surface chemistry in Li-ion batteries

This study examined the properties of 1 wt.% vinylene carbonate, vinyl ethylene carbonate, and diphenyloctyl phosphate additive electrolytes as a promising way of beneficially improving the surface and cell resistance of Li-ion batteries. The additive electrolytes were dominant both in surface formation and internal resistance. In particular, electrochemical impedance spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy confirmed that diphenyloctyl phosphate is an excellent additive to the electrolyte in the Li-ion batteries due to the improved co-intercalation of the solvent molecules.

An efficient hybrid algorithm for fire flame detection

Proposing efficient methods for fire protection is becoming more and more important, because a small flame of fire may cause huge problems in social safety. In this paper, an effective fire flame detection method is investigated. This fire detection method includes four main stages: in the first step, a linear transformation is applied to convert red, green, and blue (RGB) color space through a 3∗3 matrix to a new color space. In the next step, fuzzy c-mean clustering method (FCM) is used to distinguish between fire flame and non-fire flame pixels. Particle Swarm Optimization algorithm (PSO) is also utilized in the last step to decrease the error value measured by FCM after conversion. Finally, we apply Otsu threshold method to the new converted images to make a binary picture. Empirical results show the strength, accuracy and fast-response of the proposed algorithm in detecting fire flames in color images.

Permian soft-sediment deformation structures related to earthquake in the Southern Sydney Basin, Eastern Australia

Sydney Basin is located in the eastern part of Australia, Lachlan Fold Belt, and between the New England Fold Belt. From the Sydney basin at the end of the Late Carboniferous to Middle Triassic experienced back-arc spreading to the foreland basin at different stages: back-arc spreading stage (Carboniferous ), A passive thermal subsidence stage (early in the Permian Berry) and load deflection extruding stage (in Broughton Permian - Triassic). This time at the Sydney basin on the eastern side of the New England Fold Belt for the island Background of the arc. As a result, back-arc in the Permian Basin of the South Sydney basin by the back-arc spreading the eastern side of the arc and trench subduction before the impact of strong seismic activity, the development of a series of earthquake-related seismites to form various types and Seismic activity related to the deformation of soft sediment structure. Permian Basin, South Sydney's soft sediment deformation including cracks in shock-fold, liquefied vein, volcanic sand, load structure, flame Construction, pillow-like structure, spherical structure, pillow Layer structure slump, and so breccia. To which the cracks in shock-fold fibrillation is a direct result of earthquake faults and folds; pillow is a layer of sand caused by the earthquake fibrillation dehydration, the formation of the sinking; liquefied vein, Volcanic sand for the liquefaction of sand penetration of the formation of earthquake fissures formed; load structure, flame Construction, pillow-like structure, spherical structure is affected by the earthquake fibrillation in the sand, mudstone interface because of the sinking sand, mud layer formed through ; Slump structures and breccia of the earthquake was caused by the gravitational collapse or the formation of the debris flow. Fissures, earthquake-fold, liquefied vein, volcanic sand, load structure, flame Construction, pillow-like structure, spherical structure, pillow-like layer Equivalent to the original earthquake rocks the plot, and the slump structures and breccia of the plot belong to different earthquake rocks.

Chemiluminescence : gas-phase

Article Outline
• Introduction
• Chemiluminescence of Nitrogen Compounds
• Thermal Energy Analyzer
• Nitrogen-Selective Detector
• Redox Chemiluminescence Detection
• Chemiluminescence of Sulfur Compounds
• Chemiluminescence of Hydrocarbons
• Other Reactions with Ozone
• Flame Photometric Detector
• Other Reagent Gases
• Molecular Fluorine
• Atomic Fluorine
• Atomic Oxygen
• Active Nitrogen
• Atomic Sodium
• Chlorine Dioxide
• Official Methods
• Further Reading

A comparative evaluation of the photocatalytic and optical properties of nanoparticulate ZnO synthesised by mechanochemical processing

In this study, mechanochemical processing has been used to manufacture a nanoparticulate powder of ZnO with a controlled particle size and minimal hard agglomeration. The suitability of this ZnO powder for use as either a photocatalyst or an optically transparent UV-filter was evaluated by comparing its optical and photocatalytic properties with those of three commercially available powders that were synthesised by chemical precipitation and flame pyrolysis. The ZnO powder synthesised by mechanochemical processing was found to exhibit high optical transparency and low photocatalytic activity per unit of surface area, which indicates that it is suitable for use in optically transparent UV-filters.