Effects of deformation-induced heating on bond strength of rolled metal multilayer

The bond strength of various metal multilayers produced by cold rolling of metal foils with different thermal conductivity was investigated. Results indicated that under the same conditions of deformation and surface preparation, the metallic multilayer system with low thermal conductivity exhibited relative high bond strength while high thermal conductivity metal system may fail to be roll-bonded together. The relationship between the deformation-induced localized heating and the bond strength were discussed. The deformation-induced localized heating in the low thermal conductivity metal multilayer systems may provide opportunities for achieving a successful accumulative roll bonding or a “cold roll/heat treatment/cold roll” process to synthesize metallic multilayer materials.

Heartbeat loop (SUSPENSE style)

Heartbeat Loop is an audio loop of a bass sound emulating a heartbeat. A good piece for suspense.

Explosion 02 SFX

Explosion 02 SFX is a sound effect of an explosion.

Women's cognitive and emotional processing during sexual arousal : the effects of erotic film and absorption

Sexual arousal is a complex and dynamic element of women’s sexuality. Accounts vary, however most multidimensional models highlight the cognitive, affective and physiological components of the female sexual arousal response. While literature examining the peripheral physiological changes that occur during female sexual arousal abounds, there has been a dearth of literature pertaining to the cognitive and affective components. Thus, while many authors have included cognitive and emotions as independent components of the female sexual arousal response, there has been little empirical research to validate this approach. The aim of the current thesis was to examine the cognitive and affective components of female sexual arousal in more depth, investigating the nature of the relationship between these components under various experimental conditions. In order to do so, two integrated studies were conducted, each highlighting the effects of either external or internal variables on women’s subjective sexual arousal, absorption, positive affect and negative affect. Study One was designed to evaluate women’s emotional and cognitive processing of two elements of erotic film – foreplay and erotic context. 60 women were asked to report their subjective sexual arousal, absorption, positive affect and negative affect in response to one of four erotic film excerpts. The erotic excerpts varied in accordance with the degree of foreplay (low vs. high) depicted and the context in which the sexual activities took place (novel vs. habitual context). Women in the study responded more favourably to the high foreplay erotic film excerpt, subsequently reporting higher degrees of subjective sexual arousal, absorption and positive affect. Women also responded favourably to the erotic excerpt filmed in a novel context, reporting greater subjective sexual arousal as a result. The environment in which the sexual encounters were filmed failed to have an effect however, on women’s absorption or their positive or negative affect. The results of Study One suggest that stimulus specific variables, such as the degree of foreplay depicted, have a significant influence on female cognitive and emotional processing of erotic film. The results also suggest that a relationship exists between absorption, subjective sexual arousal and positive affect, albeit a correlational one. Specifically, there was evidence of parallel processing during sexual arousal, as participant reported sexual arousal, absorption and positive affect all increased and decreased in unison. Based on the results it was suggested that future research attempt to experimentally manipulate one of these variables, to examine its direct effect on the remaining variable. Thus, Study Two aimed to examine the effects of absorption on women’s cognitive and emotional processing of erotica. Study Two manipulated absorption at two levels (high vs. low), examining the impact of these states on participants’ subsequent absorption, subjective sexual arousal and positive and negative affect. 62 women were asked to read one of two sets of test session instructions. The first, participant-oriented instruction set, instructed participants to immerse themselves in the erotic film excerpt, as if they were active participants in the sexual exchange. The second, spectator-oriented instruction set, directed participants to observe and evaluate the erotic film. These instructions were designed to elicit high and low degrees of absorption, respectively. The utility of this approach when manipulating female absorption, was demonstrated by self reported ratings of absorption, given at the conclusion of the film presentation. Participants were also asked to report their subjective sexual arousal and positive and negative affect at the conclusion of the erotic film presentation. The findings of this study suggest that the adoption of a participant-oriented (high absorption) perspective elicits more favourable responses from participants than a spectator-oriented (low absorption) perspective, with participants in the former experimental group reporting greater degrees of subjective sexual arousal and positive affect. Negative affect was equivalent across experimental conditions, with the participants reporting that they experienced little to no aversive feelings during either of the experimental conditions. The results suggest that the degree to which a women immerses and absorbs herself in a sexual stimulus has a significant impact in her subsequent cognitive and affective processing of that stimulus. More specifically, it appears that women respond more favourably when they are highly absorbed and immersed in a stimulus, reporting greater subjective sexual arousal and positive affect. Overall, the results of Studies One and Two highlight the dynamic and complex nature of female sexual arousal. It appears that women have definite cognitive and affective responses to sexual stimuli. The magnitude of these responses may be mediated by a number of factors however, including the intrinsic qualities of the stimulus and the degree to which the woman attends to the stimulus. Both these variables act to either enhance or inhibit the sexual arousal response. There results have important implications for current sexuality literature. While women’s cognitions and emotions in response to erotic film were generally highly correlated, in some instances they differed, warranting their inclusion as separate elements in models of female sexual arousal. Furthermore, it might be suggested that the inclusion of an additional variable – absorption – into current models of female sexual arousal would prove beneficial, aiding researchers to better understand and predict the arousal process. As such, recommendations are made for a revised model of female sexual arousal. In terms of future directions, the results of the present thesis have implications for the treatment of sexual dysfunctions, suggesting that clinicians need to understand the internal and external variables that might contribute to the aetiology and maintenance of their presenting problems.

Habituation of male sexual arousal: effects of attentional focus

Three experiments are reported demonstrating that levels of penile tumescence and subjective sexual arousal are greater when men employ participant-oriented rather than spectator-oriented attentional focus while viewing an erotic film segment. Under each instructional set, there was a reduction in sexual arousal during repeated erotic stimulation. As sexual arousal habituated, the men reported feeling less absorbed during erotic stimulation. When these associated changes in attentional focus (absorption) were partialled out through analysis of covariance, sexual arousal remained relatively stable over trials, suggesting that sexual arousal is less likely to habituate if attentional focus remains constant during repeated erotic stimulation. Further directions for studying associations between habituation of sexual arousal and cognitive processing are discussed.

Technological change in the postproduction film industry a Victorian case study

The first and last stages of filmmaking production and projection remain relatively unchanged, but computerization (through digitalization) has radically transformed film and sound editing. The aim here is to examine some of the effects of this transformation on postproduction employment. The experiences of twenty Victorian postproduction workers, interviewed in 2001, provide the data presented here. The interviewees were divided into groups to reflect their life stage and time working in postproduction.

Bleaching and dyeing of superfine wool powder/polypropylene blend film

Fibers based regenerated protein draw much attention for recycling discarded protein resources and can produce biodegradable and environmental friendly polymers. In this study, superfine wool powder is blended with polypropylene (PP) to produce wool powder/PP blend film through extrusion and hot-pressing. Hydrogen peroxide is used to bleach the black colored surface of the blend films. The effects of peroxide concentration, bleaching time and powder content on the final whiteness and mechanical properties of the blend films are investigated.

The bleached films are dyed with acid red dyes and the dyed color is evaluated using a Computer Color Matching System. Color characters of dyed films, such as L*, a*, b*, ΔE*ab, C*ab and K/S values are measured and analyzed. The study not only reuses discarded wool resources into organic powder, widens the application of superfine wool powder on polymers, but also improves the dyeing properties of PP through the addition of protein content.

Effects of undoped and manganese-doped zinc oxide nanoparticles on the colour fading of dyed polyester fabrics

This paper describes the effects of applying coatings of an acrylic polymer containing nanoparticles of zinc oxide (ZnO) on the fading rate in artificial sunlight of polyester fabrics dyed with disperse dyes containing anthraquinone and benzopyran chromophores. Factors affecting the transparency and UV absorbance of the coatings are discussed. Removing the UV component of sunlight with ZnO nanoparticles markedly decreased the fading rate of the dyes, provided the polymer/ZnO film was not in direct contact with the fabric. When the treatment was applied directly to the fabrics, however, the protection against colour fading was different for the two dyes studied. Whereas the rate of colour fading of a benzopyran dye, of relatively low lightfastness, was decreased by the polymer-ZnO film, the treatment increased the fading rate of the dye of higher lightfastness, based on anthraquinone. This effect has been attributed to the generation of reactive oxygen species (ROS) when ZnO is exposed to UV. The effect of decreasing the photoactivity of ZnO by doping with manganese has been examined. For the benzopyran dye, the UV protection was greatly increased, whereas a much smaller improvement was found for the anthraquinone-based dye.

Do young children get the message? The effects of repeated video viewing on explicit and implicit information

The aim of this study was to explore the effects of repeat viewing on comprehension of explicitly and implicitly presented information in an animated movie. Seventy-three pre-school children watched an animated film and were tested for comprehension after either their single or fifth viewing. Only children’s comprehension of explicitly presented information was facilitated by repeat viewing. However, post hoc analyses revealed that children’s explicit and implicit comprehension of a central character Thunderbolt significantly increased across viewing conditions, whereas, repeat viewing only facilitated children’s explicit comprehension of the central character Patch. The theoretical and practical implications of these findings are discussed.

Measurement of aqueous film thickness between charged mercury and mica surfaces : a direct experimental probe of the Poisson-Boltzmann distribution

A stable aqueous electrolyte film is formed between a mercury drop and a flat mica surface due to electrical double-layer repulsion when a negative potential is applied to the mercury. Film thickness has been measured as a function of applied potential while keeping the film pressure constant. By making measurements in this way, it is possible to map the data directly according to the Poisson-Boltzmann equation. An excellent fit to the data is obtained, providing direct evidence for this classical equation and its use as the basis of the Gouy-Chapman model of the diffuse double layer in electrolyte solutions.

A reevaluation of forces measured across thin polymer films : nonequillibrium and pinning effects

We have measured forces between molecularly smooth solid surfaces separated by thin films of molten polydimethylsiloxane. We show that a long-range repulsion reported in earlier work is not an equilibrium force, but can be attributed to viscous drag effects. Consistent with previous results, the viscosity of the film can be modeled by assuming that a layer of polymer molecules is immobilized or ‘‘pinned’’ at each surface for a time longer than the time scale of the measurements. We propose that this pinning is a result of entanglement-like effects in the vicinity of a wall.

Stability of aqueous films between bubbles. Part 2. Effects of trace impurities and evaporation

The stability of water films has been investigated with a Mysels-Scheludko type film balance. Minor trace impurities in water do not affect the lifetime of water films under vapor saturation, but significantly influence the stability in free evaporation. Trace amounts of positively adsorbed contaminants induce Marangoni-driven flow that destabilizes films under evaporation conditions whereas negatively adsorbed electrolytes actually prolong stability by reversing interfacial tension gradients and driving a steady circulation within the film. At high thinning rates, pure-water films develop exotic-appearing flow patterns and break due to a strong coupling between hydrodynamic and interfacial tensiongradient adsorption stresses. The most dominant factor of transient film stabilization in dynamic conditions under evaporation is a surface tension gradient created in the film. We discuss surface tension gradients in transient films created by temperature differences, impurity concentration, and expansion of the films.

Electrophoretic deposition of YSZ thin-film electrolyte for SOFCs utilizing electrostatic-steric stabilized suspensions obtained via high energy ball milling

This manuscript describes a facile alternative route to make thin-film yttria-stabilized zirconia (YSZ) electrolyte by liquid-phase assisted electrophoretic deposition utilizing electrostatic-steric stabilized YSZ suspension followed by sintering. Very fine YSZ particles in ball-milled suspension facilitate their sustained dispersion through electrostatic mechanism as evidenced by their higher zeta potentials. Binder addition into the ball-milled suspension is also demonstrated to contribute complementary steric hindrance effects on suspension stability. As the consequence, the film quality and sinterability improve in the sequence of film made from non ball-milled suspension, film made from ball-milled suspension and film made from ball-milled suspension with binder addition. The specific deposition mechanisms pertaining to each suspension are also postulated and discussed below. A very thin dense electrolyte layer of ∼10 μm can be achieved via electrophoretic deposition route utilizing ball-milled suspension and binder addition. This in turn, makes the electrolyte resistance a more negligible part of the overall cell resistance. Further on, we also tested the performance of SOFC utilizing as-formed 10 μm YSZ electrolyte i.e. YSZ-NiO|YSZ|LSM (La0.8Sr0.2MnO3-δ), whereby a maximum power density of ∼850 mW cm−2 at 850 °C was demonstrated.

Effects of crystallographic orientation on corrosion behavior of magnesium single crystals

The corrosion behavior of magnesium single crystals with various crystallographic orientations was examined in this study. To identify the effects of surface orientation on the corrosion behavior in a systematic manner, single-crystal specimens with ten different rotation angles of the plane normal from the [0001] direction to the [1010] direction at intervals of 10° were prepared and subjected to potentiodynamic polarization and potentiostatic tests as well as electrochemical impedance spectroscopy (EIS) measurements in 3.5 wt.% NaCl solution. Potentiodynamic polarization results showed that the pitting potential (E _pit) first decreased from −1.57 V _SCE to −1.64 V _SCE with an increase in the rotation angle from 0° to 40°, and then increased to −1.60 V _SCE with a further increase in the rotation angle to 90°. The results obtained from potentiostatic tests are also in agreement with the trend in potentiodynamic polarization tests as a function of rotation angle. A similar trend was also observed for the depressed semicircle and the total resistances in the EIS measurements due to the facile formation of MgO and Mg(OH)₂ passive films on the magnesium surface. In addition, the amount of chloride in the passive film was found first to increase with an increase in rotation angle from 0° to 40°, then decrease with a further increase in rotation angle, indicating that the tendency to form a more protective passive film increased for rotation angle near 0° [the (0001) plane] or 90° [the (1010) plane].