Slope stability analysis for cohesive materials filled on purely cohesive undrained clay

Stability charts for soil slopes were first produced by Taylor in 1937 and they continue to be used extensively as design tools and draw the attention of many investigators. From a review of literature, it was found that there is no convenient solution has been provided for cohesive materials filled on purely cohesive undrained clay. A recent study revealed that the embankment slope which has two-layered clays failed in an undrained state which shows the importance of this study. In order to obtain the solutions for this type of fill slope. A number of numerical method are employed, namely the finite element upper and lower bound limit analysis methods and limit equilibrium method. The numerical upper and lower bound limit analysis method can bracket true solutions within a small range (6%). The solutions of limit equilibrium analysis are used for comparison purpose.

Slope stability analysis for filled slopes using finite element limit analysis method

This paper uses the finite element upper and lower bound limit analysis to assess the stability of slopes mostly found in embankment cases where frictional materials are filled on purely cohesive undrained clay. For comparison purposes, the commonly used stability assessment method, limit equilibrium method (LEM) is also employed. The final results for both methods are then presented in the form of comprehensive chart solutions for the convenience of practicing engineers during preliminary slope designs. The failure mechanism will also be discussed in this paper. Ultimately, it should be noted that finite element limit analysis method holds the upper hand as its prior assumptions are not required. Thus, the obtained failure mechanism from the slope stability analysis will be more realistic. Hence, it will provide a better understanding for the slope failure surface. Therefore, engineers should design more carefully when the LEM is applied to the slopes with frictional materials filled on purely cohesive undrained clay. © 2014 American Society of Civil Engineers.

Three-dimensional slope stability assessment of two-layered undrained clay

This paper uses the finite element upper and lower bound limit analysis methods to investigate the three-dimensional (3D) slope stability of two-layered undrained clay slopes. The solutions obtained from the slope stability analyses are bracketed to within ±10% or better. For comparison purposes, results from two-dimensional (2D) analyses based on the numerical limit analysis methods and the conventional limit equilibrium method (LEM) are also discussed. This study shows that 3D boundary of a slope can have significant effects on the slope stability. In addition, the results are presented in the form of stability charts which can be convenient tools for practicing engineers.

Slope stability analysis for fill slopes using finite element limit analysis

This paper investigates the stability of fill slopes often found in embankment cases where frictional fill materials are placed on purely cohesive undrained clay with increasing strength. By using finite element upper and lower bound limit analysis for this investigation, the limit load can be truly bounded. It is known that two-dimensional analysis yields a more conservative result due to plain strain condition when compared to three-dimensional analysis. Therefore, this paper will focus on three-dimensional (3D) slope stability analysis and for comparison purposes two-dimensional analysis results will be employed. In fact, the final results are presented in the form of comprehensive chart solutions for the convenience of practicing engineers during preliminary slope design. The failure mechanism will also be discussed in order to further illustrate the situation during failure. It should be highlighted that the failure mechanisms are obtained through the numerical method itself and no prior assumptions are required, therefore, are more realistic and able to provide a better understanding for the slope failure surfaces.