Scaling up the production rate of nanofibers by needleless electrospinning from multiple ring

Mass production of nanofibers is crucial in both laboratory research and industry application of nanofibers. In this study, multiple ring spinnerets have been used to generate needleless electrospinning. Multiple polymer jets were produced from the top of each ring in the spinning process, resulting in thin and uniform nanofibers. Production rate of nanofibers increased gradually with the increase of the number of rings in the spinneret. Spinning performance of multiple ring electrospinning, namely the quality and production rate of the as-spun nanofibers, was dependent on experimental parameters like applied voltage and polymer concentration. Electric field analysis of multiple ring showed that high concentrated electric field was formed on the surface of each ring. Fiber diameter together with production rate of needleless electrospinning was dependent on the strength and distribution of the electric field of the spinneret. Needleless electrospinning from multiple ring can be further applied in both laboratory research and industry where large amount of nanofibers must be employed simultaneously. © 2014 The Korean Fiber Society and Springer Science+Business Media Dordrecht.

Evolution of egg size and fertilisation efficiency in sea stars: large eggs are not fertilised more readily than small eggs in Patiriella (Echinodermata: Asteroidea)

Fertilisation kinetics theory suggests that, when sperm are limiting, the larger eggs of broadcast-spawning marine organisms ought to be fertilised more frequently than smaller eggs, because they provide a bigger target for searching sperm. Whilst this effect has been demonstrated within species, it is not known if this pattern holds among species. We tested whether a large difference in egg size between congeneric seastars with contrasting planktotrophic and lecithotrophic modes of development results in differences in the likelihood of eggs being fertilised in sperm-limiting situations. Measurement of egg sizes and sperm swimming speeds led to the prediction that the sperm–egg collision rate constant for Patiriella calcar (420-µm-diameter egg) should be nine times greater than for P. regularis (140-µm-diameter egg). Although the eggs of P. calcar should be fertilised at greater rates in low sperm concentrations, they were not. When gametes were allowed to mix for 10 s, the hypothesis that P. calcar eggs required less sperm than P. regularis to ensure 50% of eggs were fertilised was rejected. When gametes were mixed for 5 min, P. regularis eggs were more frequently fertilised, but the difference was not statistically significant. We conclude there must be a difference between these species in the likelihood that when a sperm finds a conspecific egg it can successfully fertilise. This apparent uncoupling of egg size and likelihood of fertilisation suggests that fertilisation is not a major constraint on the evolution of egg size in these seastars.

Circuit resistance training in chronic heart failure improves skeletal muscle mitochondrial ATP production rate—A randomized controlled trial

Background : We aimed to determine the role of skeletal muscle mitochondrial ATP production rate (MAPR) in relation to exercise tolerance after resistance training (RT) in chronic heart failure (CHF).

Methods and Results : Thirteen CHF patients (New York Heart Association functional class 2.3 ± 0.5; Left ventricular ejection fraction 26 ± 8%; age 70 ± 8 years) underwent testing for peak total body oxygen consumption (VO_2peak), and resting vastus lateralis muscle biopsy. Patients were then randomly allocated to 11 weeks of RT (n = 7), or continuance of usual care (C; n = 6), after which testing was repeated. Muscle samples were analyzed for MAPR, metabolic enzyme activity, and capillary density. VO_2peak and MAPR in the presence of the pyruvate and malate (P+M) substrate combination, representing carbohydrate metabolism, increased in RT (P < .05) and decreased in C (P < .05), with a significant difference between groups (VO_2peak, P = .005; MAPR, P = .03). There was a strong correlation between the change in MAPR and the change in peak total body oxygen consumption (VO_2peak) over the study (r = 0.875; P < .0001), the change in MAPR accounting for 70% of the change in VO_2peak.

Conclusions : These findings suggest that mitochondrial ATP production is a major determinant of aerobic capacity in CHF patients and can be favorably altered by muscle strengthening exercise.

The reliance on distant resources for egg formation in high Arctic breeding barnacle geese Branta leucopsis

Breeding in the high Arctic is time constrained and animals should therefore start with their annual reproduction as early as possible. To allow for such early reproduction in migratory birds, females arrive at the breeding grounds either with body stores or they try to rapidly develop their eggs after arrival using local resources. Svalbard breeding barnacle geese Branta leucopsis have to fly non-stop for about 1100 km from their last continental staging site to the archipelago making the transport of body stores costly. However, environmental conditions at the breeding grounds are highly unpredictable favouring residual body stores allowing for egg production after arrival on the breeding grounds. We estimated the reliance on southern continental resources, i.e. body stores for egg formation, in barnacle geese using stable isotope ratios in the geese's forage along the flyway and in their eggs. Females adopted mixed breeding strategies by using southern resources as well as local resources to varying extents for egg formation. Southern capital in lipid-free yolk averaged 41% (range: 23-65%), early laid eggs containing more southern capital than eggs laid late in the season. Yolk lipids and albumen did not vary over time and averaged a southern capital proportion of 54% (range: 32-73%) and 47% (range: 25-88%), respectively. Our findings indicate that female geese vary the use of southern resources when synthesising their eggs and this allocation also varies among egg tissues. Their mixed and flexible use of distant and local resources potentially allows for adaptive adjustments to environmental conditions encountered at the archipelago just before breeding.

The relationship between carbon stable isotope ratios of hatchling down and egg yolk in Black-headed Gulls

We reconstructed the nutrient source for egg synthesis by sampling Black-headed Gull (Larus ridibundus) eggs for yolk, analyzing their carbon stable isotope ratio, and comparing that to hatchling down. Most of the variation in carbon stable isotope ratio was explained by differences between nests, the within-nest variation being explained by laying order. These data indicate significant differences in diet choice between individual females and changes in food choice or body-store dynamics during egg laying. Among-egg variation in the carbon stable isotope ratios of the yolk were closely reflected in the hatchling down, on average down being enriched by 3.1‰ δ13C relative to yolk. Our findings support the contention that pre-laying female diets can be evaluated from hatchling down.

Needleless-electrospinning of PVA nanofibres

In this paper, we demonstrated that a thin metal disk can be used as nozzle to electrospin PVA nanofibres on a large-scale. With the rotation of a disk covered with a thin layer of electrically charged PVA solution, a large number of fibres were electrospun simultaneously from two sides of the disk and deposited on the electrode collector. The fibre production rate can be as high as 6.0 glhr, which is about 270 times higher than that of a corresponding normal needle based electrospinning system (0.022 g/hr). The effects of applied voltage, the distance between the disk nozzle and collector, and PVA concentration on the fibre morphology were examined. The dependency of fibre diameter on the PV A concentration showed a similar trend to that for a conventional electrospinning system using a syringe needle nozzle, but the diameter distribution was slightly wider for the disk electrospun fibres. The profiles of electric field strength in disk electrospinning showed considerable dependence on the disk thickness, with a thin disk exhibiting similar electric field strength profile to that of a needle electrospinning system.

Disk-electrospinning of PVA nanofibres

In this study, we demonstrated that a thin aluminium disk can be used as nozzle to electrospin PVA nanofibres on a large-scale. A schematic of this electrospinning system and a SEM image of as-spun PVA nanofibers are shown in Figure 1. The lower part of the disk is inside a bath containing the polymer solution, which is connected to a high voltage powder supply. During electrospinning, the disk rotates and picks up a thin layer of electrically charged PVA solution. A large number of fibres are then electrospun simultaneously from two sides of tile disk and deposited on the electrode collector.
With the small prototype unit we used, the fibre production rate can be as high as 6.0 which is about 270 times higher than that of a corresponding normal needle electrospinning system (0.022g/hr). The effects of appliedb voltage, the distance between the disk nozzle and collector, and PVA concentration on the fibre morphology were examined. The dependency of fibre diameter on the PVA concentration showed a similar trend to that for a conventional electrospinning system using a syringe needle nozzle, but the diameter distribution was wider for the disk electrospun fibres in this study.
The profiles of electric field strength in disk electrospinning showed considerable dependence on the disk thickness, with a thin disk exhibiting similar electric field profile to
that of a needle electrospinning system, but a thick disk (cylinder) exhibiting levelled electric field between the disk and the collector. PVA nanofibres electrospun from disk electrospinning were compared to that electrospun from syringe needle and metal cylinder nozzles.

Reduced exercise tolerance in CHF may be related to factors other than impaired skeletal muscle oxidative capacity

Background : We sought to determine whether skeletal muscle oxidative capacity, fiber type proportions, and fiber size, capillary density or muscle mass might explain the impaired exercise tolerance in chronic heart failure (CHF). Previous studies are equivocal regarding the maladaptations that occur in the skeletal muscle of patients with CHF and their role in the observed exercise intolerance.

Methods and results : Total body O₂ uptake (VO_2peak) was determined in 14 CHF patients and 8 healthy sedentary similar-age controls. Muscle samples were analyzed for mitochondrial adenosine triphosphate (ATP) production rate (MAPR), oxidative and glycolytic enzyme activity, fiber size and type, and capillary density. CHF patients demonstrated a lower VO_2peak (15.1±1.1 versus 28.1±2.3 mL·kg⁻¹·min⁻¹, P<.001) and capillary to fiber ratio (1.09±0.05 versus 1.40±0.04; P<.001) when compared with controls. However, there was no difference in capillary density (capillaries per square millimeter) across any of the fiber types. Measurements of MAPR and oxidative enzyme activity suggested no difference in muscle oxidative capacity between the groups.

Conclusions : Neither reductions in muscle oxidative capacity nor capillary density appear to be the cause of exercise limitation in this cohort of patients. Therefore, we hypothesize that the low VO_2peak observed in CHF patients may be the result of fiber atrophy and possibly impaired activation of oxidative phosphorylation.

Maternal stress to partner quality is linked to adaptive offspring sex ratio adjustment

Female birds have been shown to have a remarkable degree of control over the sex ratio of the offspring they produce. However, it remains poorly understood how these skews are achieved. Female condition, and consequent variation in circulating hormones, provides a plausible mechanistic link between offspring sex biases and the environmental and social stresses commonly invoked to explain adaptive sex allocation, such as diet, territory quality, and body condition. However, although experimental studies have shown that female perception of male phenotype alone can lead to sex ratio biases, it is unknown how partner quality influences female physiological state. Using a controlled within-female experimental design where female Gouldian finches (Erythrura gouldiae) bred with both high- and low-quality males, we found that partner quality directly affects female hormonal status and subsequent fitness. When constrained to breeding with low-quality males, females had highly elevated stress responses (corticosterone levels) and produced adaptive male-biased sex ratios, whereas when they bred with high-quality males, females had low corticosterone levels and produced an equal offspring sex ratio. There was no effect of other maternal hormones (e.g., testosterone) or body condition on offspring sex ratios. Female physiological condition during egg production, and variation in circulating hormones in particular, may provide a general mechanistic route for strategic sex allocation in birds.

Effect of temperature on anaerobic fermentation of banana stem residue

Anaerobic fermentation experiments were conducted on banana (pseudo) stem residue to study the relationship between fermentation temperature and gas production yield and gas production rate, and methane content. Based on fixed dry matter concentration, inoculum concentration and fermentation time, different temperatures, i.e. 25, 30, 35, 40°C were selected and formed four experimental groups. Four levels of single factor tests were conducted to optimize temperature parameter for anaerobic fermentation of banana stem residue. The results showed that the daily gas yield of banana stem residue reached the maximum value of 36.8L on the fourth day at 35°C, and the average gas yield was 5.03L/d. The total gas yield was 402.3L, while the maximum methane content was 61.2% in the whole fermentation process. The results indicated that the comprehensive effect was best at 35°C in anaerobic fermentation of banana stem residue.

Fiber generators in needleless electrospinning

The conventional electrospinning often uses a needle-like nozzle to produce nanofibers with a very low production rate. Despite the enormous application potential, needle electrospun nanofibers meet difficulties in broad applications in practice, due to the lack of an economic and efficient way to scale up the electrospinning process. Recently, needleless electrospinning has emerged as a new electrospinning mode and shown ability to produce nanofibers on large-scales. It has been established that the fiber generator, also referred to as “spinneret” in this paper, in needleless electrospinning plays a key role in scaling up the nanofiber production. This paper summarizes the recent advances in the development of needleless spinnerets and their influences on electrospinning process, nanofiber quality, and productivity.

Needleless eletrospinning of polystyrene fibers with an oriented surface line texture

We have demonstrated that polystyrene (PS) nanofibers having an ordered surface line texture can be produced on a large scale from a PS solution of acetone and N,N′-dimethylformamide (2/1, vol/vol) by a needleless electrospinning technique using a disc as fiber generator. The formation of the unusual surface feature was investigated and attributed to the voids formed on the surface of jets due to the fast evaporation of acetone at the early stage of electrospinning, and subsequent elongation and solidification turning the voids into ordered lines on fiber surface. In comparison with the nanofibers electrospun by a conventional needle electrospinning using the same solution, the disc electrospun fibers were finer with similar diameter distribution. The fiber production rate for the disc electrospinning was 62 times higher than that of the conventional electrospinning. Fourier transform infrared spectroscopy and X-ray diffraction measurements indicated that the PS nanofibers produced from the two electrospinning techniques showed no significant difference in chemical component, albeit slightly higher crystallinity in the disc spun nanofibers.

Needleless electrospinning of uniform nanofibers using spiral coil spinnerets

Polyvinyl alcohol nanofibers were prepared by a needleless electrospinning technique using a rotating spiral wire coil as spinneret. The influences of coil dimension (e.g., coil length, coil diameter, spiral distance, and wire diameter) and operating parameters (e.g., applied voltage and spinning distance) on electrospinning process, nanofiber diameter, and fiber productivity were examined. It was found that the coil dimension had a considerable influence on the nanofiber production rate, but minor effect on the fiber diameter. The fiber production rate increased with the increased coil length or coil diameter, or the reduced spiral distance or wire diameter. Higher applied voltage or shorter collecting distance also improved the fiber production rate but had little influence on the fiber diameter. Compared with the conventional needle electrospinning, the coil electrospinning produced finer fibers with a narrower diameter distribution. A finite element method was used to analyze the electric field on the coil surface and in electrospinning zone. It was revealed that the high electric field intensity was concentrated on the coil surface, and the intensity was highly dependent on the coil dimension, which can be used to explain the electrospinning performances of coils. In addition, PAN nanofibers were prepared using the same needleless electrospinning technique to verify the improvement in productivity.

Electric field analysis of spinneret design for needleless electrospinning of nanofibers

Concentrated electric field is crucial in generation of needleless electrospinning; the electric field profile together with electric field intensity of the spinneret directly affect the needleless electrospinning performance. Understanding the electric field of different spinnerets would definitely benefit the design and optimization of needleless electrospinning. Three-dimensional (3D) finite element analysis has been used to analyze the electric field profile and electric field intensity of different spinnerets for needleless electrospinning by using the simulation software COMSOL Multiphysics 3.5a. It has been found that evolution of the spinneret of needleless electrospinning from cylinder to multiple disks and then to multiple rings results in stronger and more concentrated electric field. The analysis based on 3D simulation of the electric field could benefit further development of needleless electrospinning in which the production rate and quality of as-spun nanofibers are of great importance.