Effect of relaxation on pressure sensitivity index in a Zr-based metallic glass

Shear-banding features of as-cast and annealed Zr_41.2Ti_13.8Cu_12.5Ni₁₀Be_22.5 bulk metallic glass were investigated through Rockwell indentation tests. Isothermal annealing of the as-cast samples was conducted at temperatures below its glass transition temperature, Tg. The exothermal enthalpy during continuous heating below Tg decreases with increasing annealing temperature, indicating the gradual reduction of free-volume upon annealing. The observation on the morphology of shear-banding pattern around the indents implies a reduced shear bands activity in the annealed samples. The included angles (2θ) between two families of shear bands emanating from the edge of Rockwell indent decrease from 88° for the as-cast sample to 79° for the sample annealed at 633 K for 1 h, indicating a pressure sensitive plasticity. By Mohr–Coulomb criterion, the pressure sensitive index can be obtained on the basis of the measured 2θ, which increases with increasing annealing temperature, indicating an increase of “atomistic friction” due to the reduction of the free volume upon annealing.

Effect of orlistat on cardiovascular disease risk in obese adults

Aim: The aim of this study is to compare the effect of orlistat vs. placebo on the predicted 10-year cardiovascular disease (CVD) risk in obese people with one or more cardiovascular risk factors treated for 12 months, in conjunction with a fat-reduced, but otherwise ad libitum, diet.

Methods: A double-blind, randomized, placebo-controlled, parallel study was performed in conjunction with a fat-reduced diet and physical activity advice for 1 year. Participants (n = 339) from eight centres in Australia and New Zealand were randomized to either orlistat (120 mg) three times daily (n = 104 women, 66 men; mean ± s.d. age = 52.0 ± 7.5 years, body mass index (BMI) = 37.6 ± 5.1 kg/m2) or placebo three times daily (n = 89 women, 80 men; age = 52.5 ± 7.4 years, BMI = 38.0 ± 4.9 kg/m2). The primary efficacy criterion was the 10-year risk of developing CVD calculated from the Framingham equation. Secondary efficacy criteria were body weight, waist circumference, blood pressure and serum concentrations of triglycerides, cholesterol (total, LDL and HDL), glucose, insulin and glycated haemoglobin and quality of life.

Results: There was no difference in the change in 10-year CVD risk between orlistat and placebo groups over 1 year. The orlistat group, however, had significant favourable changes in many of the individual CVD risk factors (total cholesterol, LDL-cholesterol, glucose, glycated haemoglobin, insulin, body weight and waist circumference) and one of the domains of quality of life measured by means of the SF-36 questionnaire (vitality), compared to the placebo group. Significant reductions in medication use for hypertension and diabetes were observed in the orlistat group, compared to those in placebo, but there were no significant differences in medication use for blood lipids.

Conclusions: Orlistat may have reduced CVD risk, as judged by the favourable changes in individual risk factors and reductions in medication use, but the method used in order to measure absolute CVD risk in this study (Framingham CVD equation) was not sensitive enough to detect the changes in this relatively low-risk group (approximately 10% of risk of a CVD event over 10 years).

The effect of hydrogenation on the ECAP compaction of Ti–6Al–4V powder and the mechanical properties of compacts

The effect of hydrogen content on the compaction of Ti–6Al–4V powder at low temperatures, namely 500 °C, using equal channel angular pressing (ECAP) with back pressure has been investigated. The properties of the compacts before and after a heat treatment and de-hydrogenation cycle have been determined. Compaction of powder by ECAP (500 °C and 260 MPa) has shown maximum levels of relative density of 99.3% and 99.4% when charged with 0.05–0.1 wt.% and 0.61–0.85 wt.% of hydrogen, respectively. After the de-hydrogenation heat treatment the diffusion bonding between individual powder particles was completed and the microstructure was altered, depending on the level of hydrogen content. Two local maxima of 99.2% and 98.1% were observed in the measured density of consolidated compacts for hydrogen contents between 0.05 wt.% and 0.1 wt.% and between 0.61 wt.% and 0.85 wt.%, respectively. However, the mechanical properties of the compacts within these two ranges of hydrogen content were significantly different due to a difference in the observed microstructure. An exceptionally high ductility of 29%, in combination with a relatively high strength of ~560 MPa, was measured in a shear punch test on specimens which had a prior hydrogen level of 0.05 wt.% before the heat treatment. It was shown that material consolidated from powder hydrogenated to low levels of hydrogen before compaction has the potential to offer substantial improvements in mechanical properties after a suitable heat treatment.

Effect of plasma on the properties of protein fibres

Atmospheric pressure plasma with a relatively short exposure time was sufficient to modify the wool surface. The ageing studies showed the hydrophobic recovery of fibre surface took place at the early stages after plasma treatment. While plasma improved wool shrink-resistance, improvement in dyeability depends on the hydrophilic-hydrophobic nature of dyestuff.

Stability of aqueous films between bubbles. Part 1. The effect of speed on bubble coalescence in purified water and simple electrolyte solutions

Film thinning experiments have been conducted with aqueous films between two air phases in a thin film pressure balance. The films are free of added surfactant but simple NaCl electrolyte is added in some experiments. Initially the experiments begin with a comparatively large volume of water in a cylindrical capillary tube a few millimeters in diameter, and by withdrawing water from the center of the tube the two bounding menisci are drawn together at a prescribed rate. Thismodels two air bubbles approaching at a controlled speed. In pure water, the results show three regimes of behavior depending on the approach speed; at slow speed (<1 μm/s) it is possible to form a flat film of pure water, ∼100 nm thick, that is stabilized indefinitely by disjoining pressure due to repulsive double-layer interactions between naturally charged air/water interfaces. The data are consistent with a surface potential of -57mV on the bubble surfaces. At intermediate approach speed (∼1-150 μm/s), the films are transiently stable due to hydrodynamic drainage effects, and bubble coalescence is delayed by ∼10-100 s. At approach speeds greater than ∼150 μm/s, the hydrodynamic resistance appears to become negligible, and the bubbles coalesce without any measurable delay. Explanations for these observations are presented that take into account Derjaguin-Landau-Verwey-Overbeek and Marangoni effects entering through disjoining pressure, surface mobility, and hydrodynamic flow regimes in thin film drainage. In particular, it is argued that the dramatic reduction in hydrodynamic resistance is a transition from viscosity-controlled drainage to inertia-controlled drainage associated with a change from immobile to mobile air/water interfaces on increasing the speed of approach of two bubbles. A simple model is developed that accounts for the boundaries between different film stability or coalescence regimes. Predictions of the model are consistent with the data, and the effects of adding electrolyte can be explained. In particular, addition of electrolyte at high concentration inhibits the near-instantaneous coalescence phenomenon, thereby contributing to increased foam film stability at high approach speeds, as reported in previous literature. This work highlights the significance of bubble approach speed as well as electrolyte concentration in affecting bubble coalescence.

Effect of gold on the corrosion behavior of an electroless nickel/immersion gold surface finish

The performance of surface finishes as a function of the pH of the utilized plating solution was evaluated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests in 3.5 wt.% NaCl solution. In addition, the surface finishes were examined by x-ray diffraction (XRD), and the contact angle of the liquid/solid interface was recorded. NiP films on copper substrates with gold coatings exhibited their highest coating performance at pH 5. This was attributed to the films having the highest protective efficiency and charge transfer resistance, lowest porosity value, and highest contact angle among those examined as a result of the strongly preferred Au(111) orientation and the improved surface wettability.

Rapidly cured out-of-autoclave laminates: understanding and controlling the effect of voids on laminate fracture toughness

Voids are one of the most significant defects found within composites and have been demonstrated to reduce the performance of composite structures. The understanding of the impact of the size and distribution of voids on laminate properties is still limited because voids have proven difficult to deliberately control. This study aims to understand the mechanisms by which voids are generated within out-of-autoclave cured laminates. In this study, a process of prepreg conditioning was developed to control the level of voids within test laminates. Non-conditioned laminates highlighted signs of void growth (1.5%), while conditioned laminates showed consistently low levels of voids (<0.3%). Mass spectrometry indicated higher levels of aqueous and solvent volatiles within the non-conditioned prepreg. Finally, Mode II fracture testing revealed a 21% improvement in toughness for the non-voided laminates. A model on the effect of voids within the Mode II stress state has also been proposed.

Effect of epinephrine on glucose disposal during exercise in humans: role of muscle glycogen

This study examined the effect of epinephrine on glucose disposal during moderate exercise when glycogenolytic flux was limited by low preexercise skeletal muscle glycogen availability. Six male subjects cycled for 40 min at 59 ± 1% peak pulmonary O₂ uptake on two occasions, either without (CON) or with (EPI) epinephrine infusion starting after 20 min of exercise. On the day before each experimental trial, subjects completed fatiguing exercise and then maintained a low carbohydrate diet to lower muscle glycogen. Muscle samples were obtained after 20 and 40 min of exercise, and glucose kinetics were measured using [6,6-²H]glucose. Exercise increased plasma epinephrine above resting concentrations in both trials, and plasma epinephrine was higher (P < 0.05) during the final 20 min in EPI compared with CON. Muscle glycogen levels were low after 20 min of exercise (CON, 117 ± 25; EPI, 122 ± 20 mmol/kg dry matter), and net muscle glycogen breakdown and muscle glucose 6-phosphate levels during the subsequent 20 min of exercise were unaffected by epinephrine infusion. Plasma glucose increased with epinephrine infusion (i.e., 20-40 min), and this was due to a decrease in glucose disposal (R_d) (40 min: CON, 33.8 ± 3; EPI, 20.9 ± 4.9 µmol · kg^-1 · min^-1, P < 0.05), because the exercise-induced rise in glucose rate of appearance was similar in the trials. These results show that glucose R_d during exercise is reduced by elevated plasma epinephrine, even when muscle glycogen availability and utilization are low. This suggests that the effect of epinephrine does not appear to be mediated by increased glucose 6-phosphate, secondary to enhanced muscle glycogenolysis, but may be linked to a direct effect of epinephrine on sarcolemmal glucose transport.

Effect of arsenic on transcription factor AP-1 and NF-kB DNA binding activity and related gene expression

Both acute (24 h) and chronic (10–20 week) exposure of human fibroblast cells to low dose sodium arsenite (As(III)) significantly affects activating protein-1 (AP-1) and nuclear factor kappa B (NF-κB) DNA binding activity. Short-term treatment with 0.1–5 μM As(III) up-regulates expression of c-Fos and c-Jun and the redox regulators, thioredoxin (Trx) and Redox factor-1 (Ref-1) and activates both AP-1 and NF-κB binding. Chronic exposure to 0.1 or 0.5 μM As(III) decreased c-Jun, c-Fos and Ref-1 protein levels and AP-1 and NF-κB binding activity, but increased Trx expression. Short term exposure to phorbol 12-myristate 13-acetate (TPA), a phorbol ester tumour promoter, or hydrogen peroxide (H₂O₂) also activates AP-1 and NF-κB binding. However, pre-treatment with As(III) prevents this increase. These results suggest that As(III) may alter AP-1 and NF-κB activity, in part, by up-regulating Trx and Ref-1. The different effects of short- versus long-term As(III) treatment on acute-phase response to oxidative stress reflect changes in the expression of Ref-1, c-Fos and c-Jun, but not Trx.

Effect of exercise on protein kinase C activity and localization in human skeletal muscle

To investigate the effect of exercise on protein kinase C (PKC) activity and localization in human skeletal muscle, eight healthy men performed cycle  ergometer exercise for 40 min at 76±1% the peak pulmonary O₂ uptake (V_O2peak), with muscle samples obtained at rest and after 5 and 40 min of exercise. PKC expression, phosphorylation and activities were examined by immunoblotting and in vitro kinase assays of fractionated and whole tissue preparations. In response to exercise, total PKC activity was slightly higher at 40 min in an enriched membrane fraction, and using a pSer-PKC-substrate motif antibody it was revealed that exercise increased the serine phosphorylation of a ∼50 kDa protein. There were no changes in conventional PKC (cPKC) or PKCθ activities; however, atypical PKC (aPKC) activity was ∼70% higher at 5 and 40 min, and aPKC expression and Thr^410/403 phosphorylation were unaltered by exercise. There were no effects of exercise on the abundance of PKCα, PKCδ, PKCθ and aPKC within cytosolic or enriched membrane fractions of skeletal muscle. These data indicate that aPKC, but not cPKC or PKCθ, are activated by exercise in contracting muscle suggesting a potential role for aPKC in the regulation of skeletal muscle function and metabolism during exercise in humans.

Effect of migration on food habits of Somali women living as refugees in Australia

This study aimed to assess the dietary changes that occur for migrants moving from a low-income to a high-income country. The sample included 45 females who had migrated to Australia from Somalia within the past 5years (1996-2001). The data for the study was derived from structured interviews conducted by a bilingual interviewer and anthropometry. Usual dietary intake and frequency of consumption of 54 foods were determined both for Australia (current home) and for Somalia (previous home). In Australia, subjects maintained the structure of the diet from their country of birth. They did increase their consumption of some processed food, such as instant noodles, crisps, and pizza. However, there was little evidence that the subjects adopted ready or partially prepared meals or takeaway meals. A significant addition to the diet in Australia was the use of breakfast cereals. Significant substitutions were of ready-baked bread for traditional bread and lamb for camel meat. The mean BMI of the sample was 27.4kg/m². Sixty percent of the sample were overweight or obese (BMI>25). Some of the dietary changes observed may be consistent with increased energy intake and altered nutrient density. Given the association between transition to a high-income diet and obesity, it is important that migrants are encouraged to retain the best of their traditional diet while adopting healthy foods from host country.