Optimal task placement with QoS constraints in geo-distributed data centers using DVFS

 With the rising demands on cloud services, the electricity consumption has been increasing drastically as the main operational expenditure (OPEX) to data center providers. The geographical heterogeneity of electricity prices motivates us to study the task placement problem over geo-distributed data centers. We exploit the dynamic frequency scaling technique and formulate an optimization problem that minimizes OPEX while guaranteeing the quality-of-service, i.e., the expected response time of tasks. Furthermore, an optimal solution is discovered for this formulated problem. The experimental results show that our proposal achieves much higher cost-efficiency than the traditional resizing scheme, i.e., by activating/deactivating certain servers in data centers.

Adaptive energy-efficient qos-aware scheduling algorithm for TCP/IP mobile cloud

The expected pervasive use of mobile cloud computing and the growing number of Internet data centers have brought forth many concerns, such as, energy costs and energy saving management of both data centers and mobile connections. Therefore, the need for adaptive and distributed resource allocation schedulers for minimizing the communication-plus-computing energy consumption has become increasingly important. In this paper, we propose and test an efficient dynamic resource provisioning scheduler that jointly minimizes computation and communication energy consumption, while guaranteeing user Quality of Service (QoS) constraints. We evaluate the performance of the proposed dynamic resource provisioning algorithm with respect to the execution time, goodput and bandwidth usage and compare the performance of the proposed scheduler against the exiting approaches. The attained experimental results show that the proposed dynamic resource provisioning algorithm achieves much higher energy-saving than the traditional schemes.

An effective VAR planning to improve dynamic voltage profile of distribution networks with distributed wind generation

This paper proposes an effective VAR planning based on reactive power margin for the enhancement of dynamic voltage stability in distribution networks with distributed wind generation. The analysis is carried over a distribution test system representative of the Kumamoto area in Japan. The detailed mathematical modeling of the system is also presented. Firstly, this paper provides simulation results showing the effects of composite load on voltage dynamics in the distribution network through an accurate time-domain analysis. Then, a cost-effective combination of shunt capacitor bank and distribution static synchronous compensator (D-STATCOM) is selected to ensure fast voltage recovery after a sudden disturbance. The analysis shows that the proposed approach can reduce the size of compensating devices, which in turn, reduces the cost. It also reduces power loss of the system.

Distributed multi-agent scheme to improve dynamic voltage stability of distribution networks

In this paper, a distributed multi-agent scheme is presented for reactive power management with renewable energy sources (RESs). The multi-agent system (MAS) framework is developed for distribution systems to improve the stability which is mostly dominated by voltage and the agents in this framework coordinate among themselves using online information and energy flow. In this paper, the agents basically perform two tasks- reactive power estimation and necessary control actions. The topology of distribution network is used to estimate the required reactive power for maintaining voltage stability where distributed static synchronous compensators (DSTATCOMs) are used to supply this reactive power. The DSTATCOM is controlled by using a linear quadratic regulator (LQR) controller within the agent framework. The proposed scheme is further compared with the conventional approach to validate the simulation results.

Performance optimization for energy-aware adaptive checkpointing in embedded real-time systems

Using additional store-checkpoinsts (SCPs) and compare-checkpoints (CCPs), we present an adaptive checkpointing for double modular redundancy (DMR) in this paper. The proposed approach can dynamically adjust the checkpoint intervals. We also design methods to calculate the optimal numbers of checkpoints, which can minimize the average execution time of tasks. Further, the adaptive checkpointing is combined with the DVS (dynamic voltage scaling) scheme to achieve energy reduction. Simulation results show that, compared with the previous methods, the proposed approach significantly increases the likelihood of timely task completion and reduces energy consumption in the presence of faults.

Voltage profile improvement for distributed wind generation using D-STATCOM

This paper presents the application of FACTS devices for the enhancement of dynamic voltage stability in distribution networks with distributed wind generation. The analysis is carried over a test distribution system representative of the Kumamoto area in Japan. The detailed mathematical modelling of the system is also presented. Firstly, this paper provides simulation results showing the effects of higher and lower penetration of distributed wind generation on the voltage dynamics in a faulted system. Then, a distribution static synchronous compensator (D-STATCOM) is used to improve the voltage profile of the system. This analysis shows that D-STATCOM has significant performance to improve the voltage dynamics of distribution system compared to shunt capacitor.

Voltage stability analysis with optimum size and location based synchronous machine DG

Power loss of a distribution system can be reduced significantly by using optimum size and location of distributed generation (DG). Proper allocation of DG with appropriate size maximizes overall system efficiency. Moreover it improves the reliability and voltage profile of the distribution system. In this paper, IEEE 123 node test feeder has been considered to determine the optimum size and location of a synchronous machine based DG for loss reduction of the system. This paper also investigates the steady-state and dynamic voltage profile of that three phase unbalance distribution network in presence of DG with optimum size. This analysis shows that optimum size of DG at proper location minimizes the power loss as well as improves the dynamic voltage profile of the distribution system.

A low overhead scaled equalized harmonic-based voice authentication system

With the increasing trends of mobile interactions, voice authentication applications are in a higher demand, giving rise to new rounds of research activities. Authentication is an important security mechanism that requires the intended communication parties to present valid credentials to the communication network. In a stronger sense, all the involved parties are required to be authenticated to one another (mutual authentication). In the voice authentication technique described in this paper, the voice characteristics of an intended individual wishing to take part in a communication channel will be classified and processed. This involves a low overhead voice authentication scheme, which features equalization and scaling of the voice frequency harmonics. The performance of this system is discussed in a Labview 8.5 visual development environment, following a complete security analysis. © 2013 Elsevier Ltd. All rights reserved.

Distributed multi-agent scheme for reactive power management with renewable energy

This paper presents a new distributed multi-agent scheme for reactive power management in smart coordinated distribution networks with renewable energy sources (RESs) to enhance the dynamic voltage stability, which is mainly based on controlling distributed static synchronous compensators (DSTATCOMs). The proposed control scheme is incorporated in a multi-agent framework where the intelligent agents simultaneously coordinate with each other and represent various physical models to provide information and energy flow among different physical processes. The reactive power is estimated from the topology of distribution networks and with this information, necessary control actions are performed through the proposed proportional integral (PI) controller. The performance of the proposed scheme is evaluated on a 8-bus distribution network under various operating conditions. The performance of the proposed scheme is validated through simulation results and these results are compared to that of conventional PI-based DSTATCOM control scheme. From simulation results, it is found that the distributed MAS provides excellence performance for improving voltage profiles by managing reactive power in a smarter way.

Small-signal stability assessment of active distribution networks with dynamic loads

This paper investigates small-signal stability of a distribution system with distributed generator and induction motor load, as a dynamic element. The analysis is carried out over a distribution test system with different types of induction motor loads. The system is linearised by the perturbation method. Eigenvalues and participation factors are calculated to see the modal interaction of the system. The study indicates that load voltage dynamics significantly influence the damping of a newly identified voltage mode. This mode has frequency of oscillation between the electromechanical and subsynchronous oscillation of power systems. To justify the validity of the modal analysis time domain simulation is also carried out. Finally, significant parameters of the system that affect the damping and frequency of the oscillation are identified.

Enhancement of transient stability limit and voltage regulation with dynamic loads using robust excitation control

In stressed power systems with large induction machine component, there exist undamped electromechanical modes and unstable montonic voltage modes. This article proposes a sequential design of an excitation controller and a power system stabiliser (PSS) to stabilise the system. The operating region, with induction machines in stressed power systems, is often not captured using a linearisation around an operating point, and to alleviate this situation a robust controller is designed which guaruntees stable operation in a large region of operation. A minimax linear quadratic Gaussian design is used for the design of the supplementary control to automatic voltage regulators, and a classical PSS structure is used to damp electromechanical oscillations. The novelty of this work is in proposing a method to capture the unmodelled nonlinear dynamics as uncertainty in the design of the robust controller. Tight bounds on the uncertainty are obtained using this method which enables high-performance controllers. An IEEE benchmark test system has been used to demonstrate the performance of the designed controller

Design and simulation of a low-actuation-voltage MEMS switch

This paper presents a low-actuation-voltage micro-electromechanical system (MEMS) capacitive shunt switch which has a very large bandwidth (4 GHz to 24 GHz). In this work, the isolation of MEMS switch is improved by adding two short high impedance transmission lines at the beginning and end of a coplanar waveguide (CPW). Simulating the switch demonstrates that a return loss (S11) is less than -26 dB for the entire frequency band, and perfect matching at 20 GHz in upstate position. A ramp dual pulse driver is also designed for reducing the capacitive charge injection for considering the reliability of the switch. The simulation results show that the shifting of voltage due to the capacitive charge is reduced by more than 35% of the initial value. Finally, the dynamic behavior of the MEMS switch is simulated by modal analysis and using CoventorWare to calculate the natural frequencies of the switch and its mode shapes. The switching ON and OFF time are 4.48 and 2.43 μs, respectively, with an actuation voltage of less than 15 V.

An improved stability criterion for time-delay power systems with electric vehicles and high voltage direct current power links

This paper presents an improved stability criterion for load frequency control (LFC) of time-delay power systems including AC/HVDC transmission links and EVs. By employing a novel refined Jensen-based inequality, an improved stability condition is derived in terms of feasible linear matrix inequalities (LMIs) which allow us to compute the maximal upper bounds of time-delay ensuring stability of the LFC scheme equipped with an embedded controller. Cases studies here are implemented for LFC scheme of a two-area power system, which is interconnected by parallel (AC/HVDC) links, with embedded proportional integral (PI) controller for discharged EVs. The relationships between the parameters of PI controller, supplementary control of HVDC links and delay margins of the LFC scheme are also discussed. As a consequence of facts, the results of delay margins can be used as a guideline to tune PI controller and set-up parameters for HVDC control.

Implementation of dual stack technique for reducing leakage and dynamic power

This paper deals with proposal of a new dual stack approach for reducing both leakage and dynamic powers. The development of digital integrated circuits is challenged by higher power consumption. Thecombination of higher clock speeds, greater functional integration, and smaller process geometries has contributed to significant growth in power density. Scaling improves transistor density and functionality ona chip. Scaling helps to increase speed and frequency of operation and hence higher performance. As voltages scale downward with the geometries threshold voltages must also decrease to gain the performance advantages of the new technology but leakage current increases exponentially. Today leakage power has become anincreasingly important issue in processor hardware and software design. It can be used in various applications like digital VLSI clocking system, buffers, registers, microprocessors etc. The leakage power increases astechnology is scaled down. In this paper, we propose a new dual stack approach for reducing both leakage and dynamic powers. Moreover, the novel dual stack approach shows the least speed power product whencompared to the existing methods. All well known approach is “Sleep” in this method we reduce leakage power. The proposed Dual Stack approach we reduce more power leakage. Dual Stack approach uses theadvantage of using the two extra pull-up and two extra pull-down transistors in sleep mode either in OFF state or in ON state. Since the Dual Stack portion can be made common to all logic circuitry, less number of transistors is needed to apply a certain logic circuit.The dual stack approach shows the least speed power product among all methods. The Dual Stack technique provides new ways to designers who require ultra-low leakage power consumption with much less speedpower product.

Dynamic pacing strategies during the cycle phase of an ironman triathlon

Introduction: A nonlinear dynamic systems model has previously been proposed to explain pacing strategies employed during exercise.

Purpose: This study was conducted to examine the pacing strategies used under varying conditions during the cycle phase of an Ironman triathlon.

Methods: The bicycles of six well-trained male triathletes were equipped with SRM power meters set to record power output, cadence, speed, and heart rate. The flat, three-lap, out-and-back cycle course, coupled with relatively consistent wind conditions (17-30 km·h-1), enabled comparisons to be made between three consecutive 60-km laps and relative wind direction (headwind vs tailwind).

Results: Participants finished the cycle phase (180 km) with consistently fast performance times (5 h, 11 ± 2 min; top 10% of all finishers). Average power output (239 ± 25 to 203 ± 20 W), cadence (89 ± 6 to 82 ± 8 rpm), and speed (36.5 ± 0.8 to 33.1 ± 0.8 km·h-1) all significantly decreased with increasing number of laps (P < 0.05). These variables, however, were not significantly different between headwind and tailwind sections. The deviation (SD) in power output and cadence did not change with increasing number of laps; however, the deviations in torque (6.8 ± 1.6 and 5.8 ± 1.3 N·m) and speed (2.1 ± 0.5 and 1.6 ± 0.3 km·h-1) were significantly greater under headwind compared with tailwind conditions, respectively. The median power frequency tended to be lower in headwind (0.0480 ± 0.0083) compared with tailwind (0.0531 ± 0.0101) sections.

Conclusion: These data show evidence that a nonlinear dynamic pacing strategy is used by well-trained triathletes throughout various segments and conditions of the Ironman cycle phase. Moreover, an increased variation in torque and speed was found in the headwind versus the tailwind condition.