30 resultados para dynamic film morphology
em Deakin Research Online - Australia
Resumo:
We present the development of a 10–100 nanometer thick surface film upon pure Mg on exposure to an ionic liquid (IL) based on the bis(trifluoromethanesulfonyl)amide (TFSA) anion. This film formation is the result of the oxidative reactivity of the metal in the IL, with the subsequent effect of ultimately protecting the underlying metal from corrosion in aqueous chloride containing solution. Film formation was studied in the IL using an electrochemical droplet cell. It was seen that this film is adherent and subsequently facilitates appreciable protection against corrosion as judged by subsequent electrochemical testing in the form of potentiodynamic polarization and impedance spectroscopy, along with direct observation. The physical film morphology was studied by electron microscopy and focused ion beam.
Resumo:
In the current study, a high-carbon, high-alloy steel (0.79 pct C, 1.5 pct Si, 1.98 pct Mn, 0.98 pct Cr, 0.24 pct Mo, 1.06 pct Al, and 1.58 pct Co in wt pct) was subjected to an isothermal bainitic transformation at a temperature range of 473 K to 623 K (200 °C to 350 °C), resulting in different fully bainitic microstructures consisting of bainitic ferrite and retained austenite. With a decrease in the transformation temperature, the microstructure was significantly refined from ~300 nm at 623 K (350 °C) to less than 60 nm at 473 K (200 °C), forming nanostructured bainitic microstructure. In addition, the morphology of retained austenite was progressively altered from film + blocky to an exclusive film morphology with a decrease in the temperature. This resulted in an enhanced wear resistance in nanobainitic microstructures formed at low transformation temperature, e.g., 473 K (200 °C). Meanwhile, it gradually deteriorated with an increase in the phase transformation temperature. This was mostly attributed to the retained austenite characteristics (i.e., thin film vs blocky), which significantly altered their mechanical stability. The presence of blocky retained austenite at high transformation temperature, e.g., 623 K (350 °C) resulted in an early onset of TRIPing phenomenon during abrasion. This led to the formation of coarse martensite with irregular morphology, which is more vulnerable to crack initiation and propagation than that of martensite formed from the thin film austenite, e.g., 473 K (200 °C). This resulted in a pronounced material loss for the fully bainitic microstructures transformed at high temperature, e.g., 623 K (350 °C), leading to distinct sub-surface layer and friction coefficient curve characteristics. A comparison of the abrasive behavior of the fully bainitic microstructure formed at 623 K (350 °C) and fully pearlitic microstructure demonstrated a detrimental effect of blocky retained austenite with low mechanical stability on the two-body abrasion.
Resumo:
Diglycidyl ether of bisphenol-A type epoxy resin cured with diamino diphenyl sulfone was used as the matrix for fiber-reinforced composites to get improved mechanical and thermal properties for the resulting composites. E-glass fiber was used for fiber reinforcement. The morphology, tensile, flexural, impact, dynamic mechanical, and thermal properties of the composites were analyzed. The tensile, flexural, and impact properties showed dramatic improvement with the addition of glass fibers. Dynamic mechanical analysis was performed to obtain the Tg of the cured matrix as well as the composites. The improved thermal stability of the composites was clear from the thermogravimetric analysis. Scanning electron micrographs were taken to understand the interfacial adhesion between the fiber and the matrix. The values of mechanical properties were compared with modified epoxy resin composite system. Predictive models were applied using various equations to compare the mechanical data obtained theoretically and experimentally.
Resumo:
In this work, optical sensing performance of tapered multimode fiber tip coated with graphene oxide (GO) nanostructured thin film towards aqueous ethanol with different concentrations is investigated. The tapering process of the optical fiber is done by a glass processing machine. The multimode optical fiber tip is dip-coated with GO and annealed at 70 °C to enhance the binding of the nanomaterials to the silica fiber. FESEM, Raman microscopy and XRD analyses are performed to micro-characterize the GO thin films. The morphology of the GO is observed to be in sheets forms. The reflectance response of the GO coated fiber tip is compared with the uncoated tip. The measurements are taken using a spectrophotometer in the optical wavelength range of 550-720 nm. The reflectance response of the GO coated fiber tip reduced proportionally, upon exposure to ethanol with concentration range of 5-80%. The dynamic response of the developed sensor showed strong reversibility and repeatability when it is exposed to ethanol with concentrations of 5%, 20% and 40% in distilled water. At room temperature, the sensor shows fast response and recovery as low as 19 and 25 s, respectively. © 2014 Elsevier B.V.
Resumo:
Polypropylene (PP) and polystyrene (PS) blends were prepared by melt processing in a haake at 180 °C. PP/PS blends are immiscible and the blend morphologies were characterized by scanning electron microscopy. The viscoelastic properties were characterized using dynamic mechanical analysis (DMA) with reference to blend ratio. The blend morphologies such as matrix droplet and phase inverted morphologies were observed. The storage modulus of the blends increased with increase in PS content and the value was maximum for neat PS. DMA showed changes in the polystyrene glass transition temperatures (Tg) over the entire composition range. There was a sharp increase in the Tg of PS with increasing PP content in the blend and a 12 °C elevation in Tg was observed. The increase in Tg was explained by proposing a new model based on the physical interaction between the blend components. It is assumed that the different effects by the PP phase resulted in the formation of constrained PS chains leading to high Tg values. The addition of PP-g-MAH has a positive effect on the morphology, increases the storage modulus, and decreases the Tg till 80/20 blends. However, for PP/PS blends with higher concentrations of PS, the PP-g-MAH has little effect or adverse effect on the morphology, and storage modulus, but decreases the Tg.
Resumo:
The effects of pyrrole, anthraquinone-2-sulphonic acid (AQSA) and iron(III) chloride (FeCl3) concentrations, reaction time and temperature on the electrical conductivity of polypyrrole (PPy) - coated poly(ethylene terephthalate) (PET) fabrics were investigated. With an increase in both the AQSA and FeCl3 concentrations, resistivity decreased to a point beyond which higher concentrations led to increased surface resistivity. Erosion of the polymer coating, in dynamic synthesis from continual abrasion, manifested as an exponential increase in the resistance of the coated textile substrate. This was not encountered in static synthesis conditions. Temperature affected the degree of surface and bulk polymerisation. The effect of polymerisation temperature on conductivity was negligible. Conductive polymer coating on textiles through chemical polymerisation enabled a smooth coherent film to encase individual fibres, which did not affect the tactile properties of the host substrate. The optimum FeCl3/pyrrole and AQSA FeCl3/pyrrole molar ratios were found to be 2.22 and 0.40 respectively.
Resumo:
This paper examines the dynamic relationship between work and life through the experiences of three mothers seeking to realise careers in the freelance film industry in Melbourne, Australia. The women were part of a larger sample of postproduction workers who were surveyed on their responses to technological change in the postproduction freeelance film industry but were out of the industry having children during the first wave of technological change. The paper examines qualitative data from these women and later longitudinal data in order to understand the limits of equal opportunity in an uneven playing field.
Resumo:
Passive flow is believed to increase the gains and reduce the costs of active suspension feeding. We used a mixture of field and laboratory experiments to evaluate whether the unstalked intertidal ascidian Pyura stolonifera exploits passive flow. We predicted that its orientation to prevailing currents and the arrangement of its siphons would induce passive flow due to dynamic pressure at the inhalant siphon, as well as by the Bernoulli effect or viscous entrainment associated with different fluid velocities at each siphon, or by both mechanisms. The orientation of P. stolonifera at several locations along the Sydney-Illawarra coast (Australia) covering a wide range of wave exposures was nonrandom and revealed that the ascidians were con- sistently oriented with their inhalant siphons directed into the waves or backwash. Flume experiments using wax mod- els demonstrated that the arrangement of the siphons could induce passive flow and that passive flow was greatest when the inhalant siphon was oriented into the flow. Field exper- iments using transplanted animals confirmed that such an orientation resulted in ascidians gaining food at greater rates, as measured by fecal production, than when oriented perpendicular to the wave direction. We conclude that P. stolonifera enhances suspension feeding by inducing pas- sive flow and is, therefore, a facultatively active suspension feeder. Furthermore, we argue that it is likely that many other active suspension feeders utilize passive flow and, therefore, measurements of their clearance rates should be made under appropriate conditions of flow to gain ecolog- ically relevant results.
Resumo:
Sexual arousal is a complex and dynamic element of women’s sexuality. Accounts vary, however most multidimensional models highlight the cognitive, affective and physiological components of the female sexual arousal response. While literature examining the peripheral physiological changes that occur during female sexual arousal abounds, there has been a dearth of literature pertaining to the cognitive and affective components. Thus, while many authors have included cognitive and emotions as independent components of the female sexual arousal response, there has been little empirical research to validate this approach. The aim of the current thesis was to examine the cognitive and affective components of female sexual arousal in more depth, investigating the nature of the relationship between these components under various experimental conditions. In order to do so, two integrated studies were conducted, each highlighting the effects of either external or internal variables on women’s subjective sexual arousal, absorption, positive affect and negative affect. Study One was designed to evaluate women’s emotional and cognitive processing of two elements of erotic film – foreplay and erotic context. 60 women were asked to report their subjective sexual arousal, absorption, positive affect and negative affect in response to one of four erotic film excerpts. The erotic excerpts varied in accordance with the degree of foreplay (low vs. high) depicted and the context in which the sexual activities took place (novel vs. habitual context). Women in the study responded more favourably to the high foreplay erotic film excerpt, subsequently reporting higher degrees of subjective sexual arousal, absorption and positive affect. Women also responded favourably to the erotic excerpt filmed in a novel context, reporting greater subjective sexual arousal as a result. The environment in which the sexual encounters were filmed failed to have an effect however, on women’s absorption or their positive or negative affect. The results of Study One suggest that stimulus specific variables, such as the degree of foreplay depicted, have a significant influence on female cognitive and emotional processing of erotic film. The results also suggest that a relationship exists between absorption, subjective sexual arousal and positive affect, albeit a correlational one. Specifically, there was evidence of parallel processing during sexual arousal, as participant reported sexual arousal, absorption and positive affect all increased and decreased in unison. Based on the results it was suggested that future research attempt to experimentally manipulate one of these variables, to examine its direct effect on the remaining variable. Thus, Study Two aimed to examine the effects of absorption on women’s cognitive and emotional processing of erotica. Study Two manipulated absorption at two levels (high vs. low), examining the impact of these states on participants’ subsequent absorption, subjective sexual arousal and positive and negative affect. 62 women were asked to read one of two sets of test session instructions. The first, participant-oriented instruction set, instructed participants to immerse themselves in the erotic film excerpt, as if they were active participants in the sexual exchange. The second, spectator-oriented instruction set, directed participants to observe and evaluate the erotic film. These instructions were designed to elicit high and low degrees of absorption, respectively. The utility of this approach when manipulating female absorption, was demonstrated by self reported ratings of absorption, given at the conclusion of the film presentation. Participants were also asked to report their subjective sexual arousal and positive and negative affect at the conclusion of the erotic film presentation. The findings of this study suggest that the adoption of a participant-oriented (high absorption) perspective elicits more favourable responses from participants than a spectator-oriented (low absorption) perspective, with participants in the former experimental group reporting greater degrees of subjective sexual arousal and positive affect. Negative affect was equivalent across experimental conditions, with the participants reporting that they experienced little to no aversive feelings during either of the experimental conditions. The results suggest that the degree to which a women immerses and absorbs herself in a sexual stimulus has a significant impact in her subsequent cognitive and affective processing of that stimulus. More specifically, it appears that women respond more favourably when they are highly absorbed and immersed in a stimulus, reporting greater subjective sexual arousal and positive affect. Overall, the results of Studies One and Two highlight the dynamic and complex nature of female sexual arousal. It appears that women have definite cognitive and affective responses to sexual stimuli. The magnitude of these responses may be mediated by a number of factors however, including the intrinsic qualities of the stimulus and the degree to which the woman attends to the stimulus. Both these variables act to either enhance or inhibit the sexual arousal response. There results have important implications for current sexuality literature. While women’s cognitions and emotions in response to erotic film were generally highly correlated, in some instances they differed, warranting their inclusion as separate elements in models of female sexual arousal. Furthermore, it might be suggested that the inclusion of an additional variable – absorption – into current models of female sexual arousal would prove beneficial, aiding researchers to better understand and predict the arousal process. As such, recommendations are made for a revised model of female sexual arousal. In terms of future directions, the results of the present thesis have implications for the treatment of sexual dysfunctions, suggesting that clinicians need to understand the internal and external variables that might contribute to the aetiology and maintenance of their presenting problems.
Resumo:
The adsorption of DNA on the Langmuir film of a cationic surfactant, dioctadecyldimethylammonium bromide (DODA·Br), and the change of the aggregation morphology of the composite monolayer with respect to surface pressure have been investigated by Brewster angle microscopy (BAM). In contrast with the case of DODA·Br on pure water subphase, when DNA was dispersed into subphase, its adsorption to the interface monolayer through electrostatic interaction decreases the charge density and therefore promotes the formation of domain at low surface pressure. In addition, the electrostatic interaction changed the phase morphology of DODA·Br Langmuir monolayer under different surface pressure, that is, from flower-shaped crystalline domain on the pure water subphase to circular domain on the subphase dispersed with DNA. The result also shows that the monolayer of the composite at air/water interface under the high pressure is not homogeneous, but consists of incompletely fused domains. For the Langmuir film of the surfactant with shorter alkyl-chains, similar morphology can be observed both under the high and low surface pressure. But the tight-stacked circular domain is no longer observed.
Resumo:
This study reports the preparation and characterization of titanium dioxide (TiO2)-based non-film catalysts, reactor design and their utilization in a hybrid dynamic degradation of acetone and toluene. The behaviours of deactivation and regeneration of catalysts are explored as well. The regression equations of conversion rate in differing operating modes are concluded.
Resumo:
The effects of solvent uptake on the relaxation behaviour, morphology and mechanical properties of poly(ether ether ketone) (PEEK), poly(etherimide) (PEI) and a 50/50 PEEK/PEI blend have been investigated. Amorphous films were immersed in acetone at 25°C, 35°C and 45°C until equilibrium uptake was achieved. The films were then examined by wide angle X-ray scattering (WAXS), differential scanning calorimetry (d.s.c.), dynamic mechanical relaxation spectroscopy and mechanical testing. WAXS and d.s.c. revealed that the degree of solvent induced crystallinity in PEEK is constant with immersion temperature, whereas the degree of induced crystallinity in the 50/50 blend is strongly temperature dependent. The dynamic mechanical studies confirmed that a significant decrease in glass transition temperature results from the plasticizing effect of the solvent and that solvent and thermally crystallized samples have different relaxation characteristics. Mechanical property tests showed that the yield stress and tensile strength of the blend are dominated by PEEK and the degree of crystallinity, while the modulus is more sensitive to the extent of plasticization.
Resumo:
Ionic liquids (ILs) based on trihexyltetradecylphosphonium coupled with either diphenylphosphate or bis(trifluoromethanesulfonyl)amide have been shown to react with magnesium alloy surfaces, leading to the formation a surface film that can improve the corrosion resistance of the alloy. The morphology and microstructure of the magnesium surface seems critical in determining the nature of the interphase, with grain boundary phases and intermetallics within the grain, rich in zirconium and zinc, showing almost no interaction with the IL and thereby resulting in a heterogeneous surface film. This has been explained, on the basis of solid-state NMR evidence, as being due to the extremely low reactivity of the native oxide films on the intermetallics (ZrO2 and ZnO) with the IL as compared with the magnesium-rich matrix where a magnesium hydroxide and/or carbonate inorganic surface is likely. Solid-state NMR characterization of the ZE41 alloy surface treated with the IL based on (Tf)2N− indicates that this anion reacts to form a metal fluoride rich surface in addition to an organic component. The diphenylphosphate anion also seems to undergo an additional chemical process on the metal surface, indicating that film formation on the metal is not a simple chemical interaction between the components of the IL and the substrate but may involve electrochemical processes.
Resumo:
The thermal stability of electrochemically prepared polypyrrole (PPy) films with p-toluenesulfonate (pTS) or perchlorate (ClO4−) counterion (PPy/pTS and PPy/ClO4−) is improved by simple treatment with aqueous sulfuric acid, sodium sulfate or sodium bisulfate. The degree of stabilization achieved depends on the solution, temperature and duration of treatment. Although the mechanism for improved stability is not yet clear, it is apparent that the level of ion exchange and the original polymer microstructure are important. A model for the conductivity decay as a function of thickness has been proposed. The early stages of ion exchange are not symmetrical, and diffusion is facilitated at the electrode side of the film. Furthermore, X-ray diffraction shows no evidence of morphological change after treatment of PPy/pTS (43 μm), but in PPy/pTS (12 μm) and PPy/ClO4− (41 μm) films an additional peak is indicative of more ordered structure following treatment. The glass transition temperature, Tg, of PPy/pTS and PPy/ClO4− films obtained by modulated differential scanning calorimetry is approximately 155°C.
Resumo:
In this study, cellulose nanofibers were obtained from wood pulp using a chemo-mechanical method and thin films were made of these cellulose nanofibers. The morphology of the films was studied by scanning electron microscopy (SEM). SEM image analysis revealed that the films were composed of cellulose nanofibers with an average diameter of around 32 nm. Other properties were also characterized, including the degree of crystallinity by X-ray diffraction, chemical bonding by infrared attenuated total reflectance analysis, and thermal properties by differential scanning calorimetry. The foldable, strong, and optically translucent cellulose nanofiber films thus obtained have many potential applications as micro/nano electronic devices, biosensors and filtration media, etc.