A study of dimensional changes in wool fibres and fabrics

Wool fabric dimensional properties were found to be influenced by the temperature and pH of the fabric, and on the fabric tension during pressure steaming. The results show that improvements can be made to standard methods for measuring fabric dimensional properties, and to the design of commercial finishing steaming equipment.

Compositional dynamics of a commercial wine fermentation using two-dimensional FTIR correlation analysis

We have demonstrated that compositional changes occurring during a commercial red wine fermentation can be effectively monitored using FTIR spectroscopy and modelled with the aid of two-dimensional correlation techniques. This study represents a novel application of two-dimensional spectroscopy and showed that the reaction rates for the conversion of fructose and glucose to alcohol were different, with the latter being more rapid. The use of a simple three-component model serves to aid interpretation of the data and the results obtained confirm the value of two-dimensional FTIR correlation spectroscopy as a chemometric tool which has considerable potential for process monitoring.

The effect of fabric strain during pressure steaming on fabric dimensional properties

It is shown that tension applied to fabric which is then permanently set by steaming under pressure for a short time has a significant effect on fabric dimensional properties. Increasing levels of stretch applied to fabric before pressure steaming resulted in decreases in fabric hygral expansion and relaxation shrinkage and also lowered fabric shrinkage that resulted from permanent setting. The setting conditions resembled those used in conventional pressure decatising, and it is suggested that in batch decatising, precise control of the length and width of fabric as it is batched up with the wrapper before steaming under pressure could enable predictable changes in fabric dimensions, relaxation shrinkage and hygral expansion to be obtained.

The national mapping of teacher professional learning project : a multi-dimensional space?

This essay focuses on the National Mapping of Teacher Professional Learning (2008), a report that we co-authored along with a number of other researchers on the basis of extensive surveys and interviews relating to the policies and practices of teacher professional learning in Australia. The report is an update of an earlier survey conducted by David McRae and others, entitled PD 2000, and it registers significant changes in attitudes and practices relating to professional learning across Australia in the intervening period. Perhaps the most significant development is the way professional learning is now recognized as an important vehicle for education reform by systems, schools and by teachers themselves, most notably the standards-based reforms that have such a decisive effect on the policy landscape here in Australia and in other countries. The work of the AATE in developing the Standards for Teachers of English Language and Literacy (STELLA) is mentioned in the report. It was acknowledged that STELLA provides a generative framework for professional learning, sometimes in contradiction to more managerial approaches. The question remains, however, of how English teachers as a professional community might locate themselves within the policy landscape described in this report. This essay is an attempt to promote this kind of discussion and to argue the distinctive nature of the standpoint that English teachers might bring to thinking about and planning for professional learning and practitioner inquiry.

Visiview : a system for the visualization of multi-dimensional data

Results generated by simulation of computer systems are often presented as a multi-dimensional data set, where the number of dimensions may be greater than 4 if sufficient system parameters are modelled. This paper describes a visualization system intended to assist in understanding the relationship between, and effect upon system behavior of, the different values of the system parameters.

The system is applied to data that cannot be represented using a mesh or isosurface representation, and in general can only be represented as a cloud of points. The use of stereoscopic rendering and rapid interaction with the data are compared with regard to their value in providing insight into the nature of the data.

A number of techniques are implemented for displaying projections of the data set with up to 7 dimensions, and for allowing intuitive manipulation of the remaining dimensions. In this way the effect of changes in one variable in the presence of a number of others can be explored.

The use of these techniques, when applied to data from computer system simulation, results in an intuitive understanding of the effects of the system parameters on system behavior.

Two-dimensional correlation localized surface plasmon resonance spectroscopy for analysis of the interaction between metal nanoparticles and bovine serum albumin

Time-resolved extinction spectra assisted with two-dimensional correlation spectroscopy (2DCOS) analysis and principal component analysis (PCA) were employed to investigate the interaction between bovine serum albumin (BSA) and metal nanoparticles (NPs). A series of localized surface plasmon resonance (LSPR) spectra of metal NPs were measured just after a small amount of BSA was added into metal colloids. Through 2DCOS analysis, remarkable changes in the intensities of the LSPR were observed. The interaction process was totally divided into three periods according to the PCA. Transmission electron microscopy, dynamic light scattering, and ζ-potential measurements were also employed to characterize the interaction between BSA and metal NPs. The addition of BSA brings silver NPs to aggregate through the electrostatic interaction between them, but it has less effect on gold NPs. In a gold and silver mixed system, gold NPs can affect the interaction of silver NPs and BSA, leading it to weaken. The combination of 2DCOS analysis and LSPR spectroscopy is powerful for exploring the LSPR spectra of the metal NP involved systems. This combined technique holds great potential in LSPR sensing through analysis of slight, slim spectral changes of metal colloids

A study of plastic deformation during axisymmetric forward spiral extrusion and its subsequent mechanical property changes

Axisymmetric forward spiral extrusion (AFSE) accumulates large strains in its sample while extruding it through a die with engraved spiral grooves. A three-dimensional finite element model of AFSE has been developed using ABAQUS to investigate the deformation mode in detail, including the effect of groove geometry and the heterogeneity of plastic deformation. The numerical results demonstrated that the strain distribution in the AFSE sample cross section is linear in the radial direction within a concentric core while the distribution, outside the core, in the vicinity of the grooves is non-linear and non-axisymmetric. Mechanical properties and grain structure changes of the deformed sample were investigated. Improvements of mechanical properties in the processed samples can be attributed to the domination of the shear deformation mode in a plane normal to the extrusion axis and consequently the elongation of grains in the tangential direction

Combined use of GPS and accelerometry reveals fine scale three-dimensional foraging behaviour in the short-tailed shearwater

Determining the foraging behaviour of free-ranging marine animals is fundamental for assessing their habitat use and how they may respond to changes in the environment. However, despite recent advances in bio-logging technology, collecting information on both at-sea movement patterns and activity budgets still remains difficult in small pelagic seabird species due to the constraints of instrument size. The short-tailed shearwater, the most abundant seabird species in Australia (ca 23 million individuals), is a highly pelagic procellariiform. Despite its ecological importance to the region, almost nothing is known about its at-sea behaviour, in particular, its foraging activity. Using a combination of GPS and tri-axial accelerometer data-loggers, the fine scale three-dimensional foraging behaviour of 10 breeding individuals from two colonies was investigated. Five at-sea behaviours were identified: (1) resting on water, (2) flapping flight, (3) gliding flight, (4) foraging (i.e., surface foraging and diving events), and (5) taking-off. There were substantial intra- and inter- individual variations in activity patterns, with individuals spending on average 45.8% (range: 17.1-70.0%) of time at sea resting on water and 18.2% (range: 2.3-49.6%) foraging. Individuals made 76.4 ± 65.3 dives (range: 8-237) per foraging trip (mean duration 9.0 ± 1.9 s), with dives also recorded during night-time. With the continued miniaturisation of recording devices, the use of combined data-loggers could provide us with further insights into the foraging behaviour of small procellariiforms, helping to better understand interactions with their prey.