Growth and replication : exploring facade subdivision based on natural processes

Generative methods for subdivision of building façades are presented in this thesis through a series of case studies exploring methods of stochastic generation, tiling and tessellation and branching structures.  In each of these studies, a method of generative design based on natural phenomena of growth and replication is described algorithmically.

Design and analysis of a cantilever biosensor based on a boron nitride nanotube

In this paper, we introduce a single-walled boron nitride nanotube (SWBNNT)-based cantilever biosensor, and investigate its bending deformation. The BNNT-based cantilever is modelled by accounting that the surface of the cantilever beam is coated with the antibody molecule. We have considered two main approaches for the mechanical deformation of the BNNT beam. The first one is differential surface stress produced by the binding of biomolecules onto its surface, and the second one is the charge released from the biomolecular interaction. In addition, other parameters including length of beam, variation of beam’s location and chiralities of the BNNT have been taken into consideration to design the cantilever biosensor. The computed results are in good agreement with the well known electrostatic equations that govern the deformation of the cantilever.

On the influence of building design, occupants and heat waves on comfort and greenhouse gas emissions in naturally ventilated offices. A study based on the EN 15251 adaptive thermal comfort model in Athens, Greece

According to the Intergovernmental Panel on Climate Change the buildings sector has the largest mitigation potential for CO2 emissions. Especially in office buildings, where internal heat loads and a relatively high occupant density occur at the same time with solar heat gains, overheating has become a common problem. In Europe the adaptive thermal comfort model according to EN 15251 provides a method to evaluate thermal comfort in naturally ventilated buildings. However, especially in the context of the climate change and the occurrence of heat waves within the last decade, the question arises, how thermal comfort can be maintained without additional cooling, especially in warm climates. In this paper a parametric study for a typical cellular naturally ventilated office room has been conducted, using the building simulation software EnergyPlus. It is based on the Mediterranean climate of Athens, Greece. Adaptive thermal comfort is evaluated according to EN 15251. Variations refer to different building design priorities, and they consider the variability of occupant behaviour and internal heat loads by using an ideal and worst case scenario. The influence of heat waves is considered by comparing measured temperatures for an average and an exceptionally hot year within the last decade. Since the use of building controls for shading affects thermal as well as visual comfort, daylighting and view are evaluated as well. Conclusions are drawn regarding the influence and interaction of building design, occupants and heat waves on comfort and greenhouse gas emissions in naturally ventilated offices, and related optimisation potential.

Design based learning – student's views on industry requirements

The focus of this research paper is to illustrate students views on design based learning, and in particular  to investigate and present how important design based learning is for a career in engineering. Students  need to  acquire  various skills by  learning  and practicing  engineering, which  is necessary to  explore themselves according to the industry requirements. However students and educators are not aware of  existing industry requirements of graduates. In learning and teaching institutions, practicing design is  one of the fundamental processes in engineering and all other engineering activities related to it. When  students require the  opportunity to  apply their  knowledge to solve  design  problems,  design  based learning is generally recorded as an innovative method for engineering education. This paper presents  research findings from  a quantitative  analysis  of student  views on design based  learning for future  career readiness in engineering.

A novel time computation model based on algorithm complexity for data intensive scientific workflow design and scheduling

Scientific workflow offers a framework for cooperation between remote and shared resources on a grid computing environment (GCE) for scientific discovery. One major function of scientific workflow is to schedule a collection of computational subtasks in well-defined orders for efficient outputs by estimating task duration at runtime. In this paper, we propose a novel time computation model based on algorithm complexity (termed as TCMAC model) for high-level data intensive scientific workflow design. The proposed model schedules the subtasks based on their durations and the complexities of participant algorithms. Characterized by utilization of task duration computation function for time efficiency, the TCMAC model has three features for a full-aspect scientific workflow including both dataflow and control-flow: (1) provides flexible and reusable task duration functions in GCE;(2) facilitates better parallelism in iteration structures for providing more precise task durations;and (3) accommodates dynamic task durations for rescheduling in selective structures of control flow. We will also present theories and examples in scientific workflows to show the efficiency of the TCMAC model, especially for control-flow. Copyright©2009 John Wiley & Sons, Ltd.

Multiple origins of the endemic Australian Macrobrachium (Descapoda: Palaemonidae) based on 16S rRNA mitochondrial sequences

The evolutionary relationships of the freshwater prawn genus Macrobrachium are obscure. Members of this genus are widely distributed across tropical and subtropical regions. The phylogenetic relationships among the seven endemic and six non-endemic Australian Macrobrachium, along with five non-Australian species, were inferred from the mitochondrial 16S rRNA gene sequences. Methods of analysis yielded phylogenetic trees of differing topologies; however, none supported a monophyletic origin for endemic Australian Macrobrachium. Enforced monophyly of a single origin of endemic Macrobrachium was statistically tested and rejected. These results support the view that the endemic Australian Macrobrachium arose from multiple origins. Previous biogeographical hypotheses related to the radiation of Macrobrachium into Australia are re-examined in the context of these results.

Functional extruded snack products based on chickpea (Cicer arietinum L.) and fenugreek (Trigonella foenum-graecum) flours

Background – Chickpea and fenugreek are both legumes that confer several nutritional and functional virtues, especially to diabetes and associated metabolic syndrome conditions. They are high in protein and fibre, low in fat and prove to be low glycaemic. They also provide a gluten-free alternative to those suffering from celiac disease. Though these seeds are locally available, hardly any products appear on the supermarket shelves.
Objectives – The aim was to utilise the health and nutritional benefits of chickpea and fenugreek and develop acceptable snack products by extrusion technology.
Design – Preliminary trials were conducted with different proportions of rice and chickpea at a range of extruder conditions to optimise the raw material and processing conditions. Studies were then conducted at optimum processing conditions using a 7:3 chickpea and rice combination replacing with 2% fenugreek or 5, 10, 15 and 20% FenuLifeÒ (deodorized fenugreek powder). Products were evaluated for their physical (expansion, crunchiness and colour) and sensory ( texture, colour, flavour and overall acceptability) characteristics in order to identify their suitability as snack products.
Outcomes – Addition of chickpea up to 70% with rice showed increased expansion and stable product characteristics. Addition of fenugreek and FenuLifeÒ, indicated slight reduction in product expansion (radial) and crunchiness. However, the product made with 20% FenuLifeÒ had significant changes in expansion, crunchiness and colour values. The median scores of sensory evaluation indicated that all products were within the acceptable range. Inclusion of fenugreek showed lower ratings for flavour due to the strong bitter taste of fenugreek. There were no significant differences between products containing FenuLifeÒ (5-15%) in their colour, flavour, texture and overall quality.
Conclusion – This study demonstrates an opportunity for using chickpea and fenugreek in functional product development. Fenugreek in the form of deodorize powder (fenulifeÒ) could be incorporated up to 15% in a mixture of chickpea and rice to develop snack products of acceptable physical and sensory properties.

Power control in CDMA systems based on channel identification

Power control design is a critical aspect of CDMA cellular systems design. This paper develops an adaptive power controller design method for CDMA systems. The key to the power control design is on the recursive identification of the underlying wireless stochastic channel model parameters. The identification process guarantees the power controller to work well for systems in unknown or time varying network environment.

Development of a building integrated photovoltaic/thermal solar collector based on steel roofing

The use of onsite renewable energy cogeneration from structural building elements is a relatively new concept, and one that is gaining considerable interest in the building industry. In this study the design, development, testing and production methods for a novel building integrated photovoltaic/thermal (BIPVT) solar energy cogeneration system are examined and discussed.

During the analysis of the design, adhesives (ADH), resistance seam welding (RSW) and autoclaving (ATC) were identified as the most appropriate for fabricating BIPVT panels for roofing and façade applications. Of these manufacturing methods ADH was found to be most suitable for low volume production systems due to its low capital cost.

Furthermore, a prototype panel was fabricated using ADH methods and exhibited good thermal performance. In addition it was shown, using experimental testing, that the performance of a BIPVT could be theoretically predicted using a one-dimensional heat transfer model. Furthermore, the model was used to suggest further improvements that could be made to the design. Finally, a transient simulation of the BIPVT was performed in TRNSYS and was used to illustrate the long term benefits of the system.