Grain size effect on behaviour and microstructure of a warm deformed Ti-IF steel

The effect of grain size on the deformation behaviour in the fenite region of a Titanium stabilized Interstitial Free steel was investigated by hot torsion. The initial work hardening regime is followed by a softening regime where a broad peak stress develops. The peak stress and the stress at final strain were relatively insensitive to grain size. However, at low values of the Zener-Hollomon parameter, the strain to the peak stress was strongly dependent on the grain size. A series of microstructural parameters were examined to explain these observations.

Understanding the deformed microstructure of cold-rolled IF and LC steel

This paper presents an overview of a series of investigations of the microstructure and texture of cold-rolled IF and LC steel. The investigations made extensive use of orientation mapping using electron backscattered diffraction (EBSD) in a field emission gun scanning electron microscope (FEG-SEM). The effect of grain boundaries on the deformed microstructure was examined by comparing the textures of regions near grain boundaries and in the interiors of grains.  A general weakening of the texture, but a strengthening of the {OOI}<110> component, occurs in the vicinity of grain boundaries. Misorientation angle and axis distributions were used to characterise the fragmentation of grains belonging to different orientation classes. The influence of carbon on the deformed microstructure and nucleation during recrystallization was clarified by examining the microstructures of LC and IF steels during rolling and annealing. The
results of the investigations emphasize the important role of shear banding in determining the fragmentation behaviour of ND-fibre grains and the orientations of viable recrystallization nuclei within the deformed microstructure.

Modeling the flow behavior, recrystallization, and crystallographic texture in hot-deformed Fe-30 Wt Pct Ni Austenite

The present work describes a hybrid modeling approach developed for predicting the flow behavior, recrystallization characteristics, and crystallographic texture evolution in a Fe-30 wt pct Ni austenitic model alloy subjected to hot plane strain compression. A series of compression tests were performed at temperatures between 850 °C and 1050 °C and strain rates between 0.1 and 10 s⁻¹. The evolution of grain structure, crystallographic texture, and dislocation substructure was characterized in detail for a deformation temperature of 950 °C and strain rates of 0.1 and 10 s⁻¹, using electron backscatter diffraction and transmission electron microscopy. The hybrid modeling method utilizes a combination of empirical, physically-based, and neuro-fuzzy models. The flow stress is described as a function of the applied variables of strain rate and temperature using an empirical model. The recrystallization behavior is predicted from the measured microstructural state variables of internal dislocation density, subgrain size, and misorientation between subgrains using a physically-based model. The texture evolution is modeled using artificial neural networks.

Characteristics of the contraction twins formed close to the fracture surface in Mg-3A1-1Zn alloy deformed in tension

Characteristics of the “contraction” twins, formed close to the fracture surface in Mg–3Al–1Zn alloy deformed in tension approximately perpendicular to the grain c-axes, are investigated using transmission electron microscopy. The grain c-axis contractions were largely accommodated by {1011}-{1012} source double-twins in a variant characterized by 38° ⟨1210⟩ source twin/matrix misorientation in conjunction with dislocation slip. A possible interpretation of the observed preference for this variant formation is given and some crystal plasticity modelling is performed to elucidate the matter.

Projections to the preoptic area from the paraventricular nucleus, acuate nucleus and the bed nucleus of the stria terminalis are unlikely to be involved in stress-induced suppression of GnRH secretion in sheep

Stress compromises reproductive function and the major physiological system activated during stress is the hypothalamo-pituitary-adrenal axis. Corticotrophin-releasing hormone and arginine vasopressin (AVP), which are produced in neurones of the paraventricular nucleus (PVN), drive the hypothalamo-pituitary-adrenal axis and are also implicated in the suppression of the reproductive axis. We used retrograde tracing and Fos labelling to map the projections from the PVN to the preoptic area (POA) where most gonadotrophin releasing hormone (GnRH) neurones are found. Fluorogold (FG) injections were made into the POA of gonadectomised male and female sheep (n = 5/sex), the animals were stressed and the brains recovered for histochemistry. All animals responded to stress with an increase in the number of Fos-labelled nuclei in the PVN. Few retrogradely labelled cells of the PVN were activated by stress. Dual labelling showed that very few FG-labelled cells also stained for corticotrophin-releasing hormone, none for AVP or enkephalin. Dual labelling for FG and Fos in the bed nucleus of the stria terminalis (BNST) and the arcuate nucleus showed that no FG-labelled cells in the BNST and only few in the ARC were activated by stress. No sex differences were observed in the activation of FG-labelled cells in any of the nuclei examined. We conclude that, although cells of the PVN, BNST and/or arcuate nucleus may affect reproduction via the GnRH cells of the POA, this is unlikely to involve direct input to the POA. If cells of these regions are involved in GnRH suppression during stress, this may occur via interneuronal pathways.

Developmental stress selectively affects the song control nucleus HVC in the zebra finch brain

Songbirds sing complex songs as a result of evolution through sexual selection. The evolution of such sexually selected traits requires genetic control, as well as selection on their expression. Song is controlled by a discrete neural pathway in the brain, and song complexity has been shown to correlate with the volume of specific song control nuclei. As such, the development of these nuclei, in particular the high vocal centre (HVC), is thought to be the mechanism controlling signal expression indicating male quality. We tested the hypothesis that early developmental stress selectively affects adult HVC size, compared with other brain nuclei. We did this by raising cross–fostered zebra finches (Taeniopygia guttata) under stressed and controlled conditions and determining the effect on adult HVC size. Our results confirm the strong influence of environmental conditions, particularly on HVC development, and therefore on the expression of complex songs. The results also show that both environmental and genetic factors affect the development of several brain nuclei, highlighting the developmental plasticity of the songbird brain. In all, these results explain how the complex song repertoires of songbirds can evolve as honest indicators of male quality.

Co-localization and distribution of corticotrophin-releasing hormone, arginine vasopressin and enkephalin in the paraventricular nucleus of sheep : a sex comparison

The paraventricular nucleus (PVN) is integral to regulation of the hypothalamo-pituitary-adrenal (HPA) axis and contains cells producing corticotrophin-releasing hormone (CRH), arginine vasopressin (AVP) and enkephalin. We used immunohistochemistry to map these peptides and to resolve the extent of co-localization within PVN cells in intact and gonadectomized male and female sheep. Immunoreactive (ir) CRH, AVP and enkephalin cells were mapped in two rams and two ewes at 180 μm intervals throughout the rostro-caudal extent of the PVN. Similar distributions of AVP-ir cells occurred in both sexes whereas CRH-ir and enkephalin-ir cells extended more rostrally in rams. In groups (n=4) of intact and gonadectomized sheep of both sexes, co-localization and distribution of neuropeptides was influenced by sex and gonadectomy. Males had more AVP and CRH cells than females. Intact animals had more AVP cells than gonadectomized animals. There were no differences between groups in the number or percentage of cells that stained for both CRH and AVP or in the number of cells that stained for both CRH and enkephalin. Differences were observed in the percentage of enkephalin cells that contained CRH with males having a greater percentage of co-localized cells than did females. Differences were also observed in the number and percentage of cells that stained for both enkephalin and AVP; the number of cells that stained for both neuropeptides was greater in males than in females and greater in intact animals than in gonadectomized animals. Differences were observed in the percentage of AVP cells that contained enkephalin, and in the percentage of enkephalin cells that contained AVP with males having a greater percentage of co-localized cells than did females. We conclude that sex and gonadal status affect peptide distribution in the PVN of the sheep which may provide an anatomical basis for sex differences in HPA axis

Characteristics of the deformed and recrystallised grains obtained after hot plane strain compression of a model Fe-30wt%Ni alloy

The development of physically-based models of microstructural evolution during hot deformation of metallic materials requires knowledge of the grain/subgrain structure and crystallographic texture characteristics over a range of processing conditions. A Fe-30wt%Ni based alloy, retaining a stable austenitic structure at room temperature, was used for modelling the development of austenite microstructure during hot deformation of conventional carbon-manganese steels. A series of plane strain compression tests was carried out at a temperature of 950 °C and strain rates of 10 s-1 and 0.1 s-1 to several strain levels. Evolution of the grain/subgrain structure and crystallographic texture was characterised in detail using quantitative light microscopy and highresolution electron backscatter diffraction. Crystallographic texture characteristics were determined separately for the observed deformed and recrystallised grains. The subgrain geometry and dimensions together with the misorientation vectors across sub-boundaries were quantified in detail across large sample areas and the orientation dependence of these characteristics was determined. Formation mechanisms of the recrystallised grains were established in relation to the deformation microstructure.

Softening mechanisms in two duplex stainless steels deformed in hot torsion

The aim of the present work was to undertake a detailed investigation of the softening mechanisms during hot deformation of a 21Cr-10Ni-3Mo (steel A) and a 21Cr-8Ni-3Mo (steel B) austenite/ferrite duplex stainless steels containing about 60% and 30% of austenite, respectively. The steels were subjected to hot deformation in torsion performed at 900 ºC and 1200 ºC using a strain rate of 0.7 s-1 to several strain levels. Quantitative optical and transmission electron microscopy were used in the investigation. Austenite was observed to soften via dynamic recovery (DRV) and dynamic recrystallisation (DRX) accompanied by DRV for the deformation temperatures of 900 °C and 1200 °C, respectively, for the both steels studied. DRX of austenite largely occurred through strain-induced grain boundary migration, complemented by (multiple) twinning, and developed significantly faster in steel A than in steel B, indicating that considerably larger strains partitioned into austenite in the former steel during deformation at 1200 °C. The above softening mechanism was accompanied by the formation of DRX grains from subgrains along the austenite/ferrite interface and by large-scale subgrain coalescence. At 900°C, stressassisted phase transitions between austenite and ferrite were observed, characterised by dissolution of the primary austenite, formation of Widmanstätten secondary austenite and gradual globularisation of the microstructure with increasing strain. These processes appeared to be significantly more widespread in steel B. The softening mechanism within ferrite for the both steels studied was classified as “continuous DRX”, characterised by a gradual increase in misorientations between neighbouring subgrains with strain, for the both deformation temperatures.

EBSD investigation of the microstructure and texture characteristics of hot deformed duplex stainless steel

The microstructure and crystallographic texture characteristics were studied in a 22Cr-6Ni-3Mo duplex stainless steel subjected to plastic deformation in torsion at a temperature of 1000 °C using a strain rate of 1 s⁻¹. High-resolution EBSD was successfully used for precise phase and substructural characterization of this steel. The austenite/ferrite ratio and phase morphology as well as the crystallographic texture, subgrain size, misorientation angles and misorientation gradients corresponding to each phase were determined over large sample areas. The deformation mechanisms in each phase and the interrelationship between the two are discussed.