Characterisation of nickel(II) extraction by 2-hydroxy-5-nonylacetophenone oxime (LIX 84) in a micellar phase

The properties of the nickel(II)/2-hydroxy-5-nonylacetophenone oxime (HNAPO), an active ingredient in LIX 84, extraction system were characterised in a micellar system. The extinction coefficient, λ_max of HNAPO (316 nm) and the Ni²⁺ complex (387 nm) in a neutral micellar system, poly dispersed octa-ethyleneglycol mono-n-dodecyl ether (G₁₂A₈) were determined as 3100 and 3500 M⁻¹ cm⁻¹, respectively. HNAPO was found to have a neutral micellar phase and bulk aqueous phase pK_a of 11.5 and 12.5, respectively. The extraction equilibrium constant, K_ex, was determined to be 10^−8.0, and the deviation from theory observed at high pH can be accounted for by consideration of the competition for nickel(II) ions by hydroxide ions and HNAPO. A micellar phase of octa-ethyleneglycol mono-n-dodecyl ether (C₁₂E₈) was determined to be an appropriate model of the free oil/water interface from the solubilised location of HNAPO. Utilising the interfacial probe, 4-heptadecyl-7-hydroxy coumarin (HHC) allowed the determination of the electrostatic surface potential of mixed micelles of G₁₂A₈ and sodium dodecyl sulphate (SDS) or dodecyl trimethyl ammonium chloride (DTAC). The electrostatic surface potential was a linear function of the number of additional surfactant monomers within the G₁₂A₈ micelle, for the concentration range studied. For G₁₂A₈/DTAC mixed micelles, the surface potential was given by +1.1 mV per DTAC molecule per micelle, and for G₁₂A₈/SDS mixed micelles the relationship was −1.4 mV per SDS molecule per micelle.

Some results on Lipschitz quasi-arithmetic means

We present in this paper some properties of k-Lipschitz quasi-arithmetic means. The Lipschitz aggregation operations are stable with respect to input inaccuracies, what is a very important property for applications. Moreover, we provide sufficient conditions to determine when a quasi–arithemetic mean holds the k-Lipschitz property and allow us to calculate the Lipschitz constant k.

Evolutionary specialization of a tryptophan indole group for transition-state stabilization by eukaryotic transglutaminases

Covalent posttranslational protein modifications by eukaryotic transglutaminases proceed by a kinetic pathway of acylation and deacylation. Ammonia is released as the acylenzyme is formed, whereas the cross-linked product is released later in the deacylation step. Superposition of the active sites of transglutaminase type 2 (TG2) and the structurally related cysteine protease, papain, indicates that in the formation of tetrahedral intermediates, the backbone nitrogen of the catalytic Cys-277 and the N_Ɛ1 nitrogen of Trp-241 of TG2 could contribute to transition-state stabilization. The importance of this Trp-241 side chain was demonstrated by examining the kinetics of dansylcadaverine incorporation into a model peptide. Although substitution of the Trp-241 side chain with Ala or Gly had only a small effect on the Michaelis constant K_m (1.5-fold increase), it caused a >300-fold lowering of the catalytic rate constant k_cat. The wild-type and mutant TG2-catalyzed release of ammonia showed kinetics similar to the kinetics for the formation of cross-linked product, indicating that transitionstate stabilization in the acylation step was rate-limiting. In papain, a Gln residue is at the position of TG2-Trp-241. The conservation of Trp-241 in all eukaryotic transglutaminases and the finding that W241Q-TG2 had a much lower k_cat than wild-type enzyme suggest evolutionary specialization in the use of the indole group. This notion is further supported by the observation that transitionstate- stabilizing side chains of Tyr and His that operate in some serine and metalloproteases only partially substituted for Trp.

Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming

To quantify the frictional behaviour in sheet forming operations, several laboratory experiments which simulate the real forming conditions are performed. The Bending Under Tension Test is one such experiment which is often used to represent the frictional flow of sheet material around a die or a punch radius. Different mathematical representations are used to determine the coefficient of friction in the Bending Under Tension Test. In general the change in the strip thickness in passing over the die radius is neglected and the radius of curvature to thickness ratio is assumed to be constant in these equations. However, the effect of roller radius, sheet thickness and the surface pressure are also omitted in some of these equations. This work quantitatively determined the effect of roller radius and the tooling pressure on the coefficient of friction. The Bending Under Tension Test was performed using rollers with different radii and also lubricants with different properties. The tool radii were found to have a direct influence in the contact pressure. The effect of roller radius on friction was considerable and it was observed that there is a clear relationship between the contact pressure and the coefficient of friction.

Adaptive blind source separation using constant modulus criterion and signal mutual information

We address the problem of adaptive blind source separation (BSS) from instantaneous multi-input multi-output (MIMO) channels. It is known that the constant modulus (CM) criterion can be used to extract unknown source signals. However, the existing CM based algorithms normally extract the source signals in a serial manner. Consequently, the accuracy in extracting each source signal, except for the first one, depends on the accuracy of previous source extraction. This estimation error propagation (accumulation) causes severe performance degradation. In this paper, we propose a new adaptive separation algorithm that can separate all source signals simultaneously by directly updating the separation matrix. The superior performance of the new algorithm is demonstrated by simulation examples

Blind equalization of non-irreducible and non-column-reduced channels driven by constant modulus signals

We address the blind equalization of finite-impulse-response (FIR), multiple-input multiple-output (MIMO) channels excited by constant modulus (CM) signals. It is known that the algorithms based on the constant modulus (CM) criterion can equalize an FIR MIMO channel that is irreducible and column-reduced. We show in this paper that the CM property of signals can be exploited to construct a zero-forcing equalizer for a non-irreducible and non-column-reduced channel. We also give a lower bound for the order of the equalizer. Simulation examples demonstrate the proposed result.

Variation of fibre diameter coefficient of variation and fibre curvature across mohair fleeces: Implications for animal selection, genetic selection and fleece evaluation

The presentwork aimed to determine howthe average fibre diameter coefficient of variation (CVD) and fibre curvature (FC) differences between nine sampling sites vary between sex and flock, to identify differences in variability between sampling sites as a result of between animal and between sire variability and to determine correlations between sampling sites in between animal and between sire variability. Australian Angoras (n = 313) from two farms in southern Australia were sampled at 12 and 18 months of age at nine sites (mid side, belly, brisket, hind flank, hip, hock, mid back, neck, shoulder). Staples were taken prior to shearing at skin level and CVD and FC determined. For each shearing, differences in CVD and FC between sampling sites, how these differences were affected by farm, sex, and sire, and the covariance between sites for sire and individual animal effects were investigated by restricted maximum likelihood (REML) analyses. The median mid side CVD at 12 and 18 months of age ranged from 23.6 to 25.1% but the actual range was 16.8–34.2%. The median mid side FC at 12 and 18 months of age ranged from 14.4 to 18.6◦/mm but the actual range was 10.5–26.3◦/mm. The general pattern for CVDwas for the mid back, hip and neck sites to have similar CVD, the brisket, hind flank and hock sites to have larger CVD and the belly to have smaller CVD than the mid side site. The between animal variation for CVD was lowest at the mid back site. This implies that the mid back would be the most effective site for between animal selection for CVD. Heritabilities for CVD (range at 18 months 0.18–0.30) were only about half the heritabilities for mean fibre diameter in the same study. There was a marked anterior–posterior increase in FC at both farms and with both ages. The results give no clear indication of the best site for between animal selection for FC, other than that the hock should be avoided. Heritabilities for FC are moderate to high (range at 18 months 0.44–0.77) and the genetic correlations are high except for the hock. Thus genetic selection for FC at any site, other than the hock, should be effective for changing FC over the entire fleece. There was more variability between animals than between sites and sires. These results are put into context with associated research on variation in mean fibre diameter and staple length.

Preparation of constant viscosity natural rubber with mercaptan

Constant viscosity natural rubber has been prepared using mercaptan. The accelerated storage tests indicate that the storage hardening phenomenon of natural rubber can be inhibited by mercaptan. The amount of mercaptan (2-mercaptobenzothiazole) of 0.14 phr is sufficient to prepare constant viscosity natural rubber and the storage hardening numbers of constant viscosity NR in both Mooney viscosity and Wallace plasticity are less than 4. The processing properties and anti-oxidative behavior of CV-NR can be improved, although the mechanical properties of vulcanizates decreased slightly as compared to those of natural rubber. The results further support the hypothesis that the abnormal groups in natural rubber molecules are aldehyde groups and are responsible for the hardening of natural rubber.