Control of excitation and quenching in multi-colour electrogenerated chemiluminescence systems through choice of co-reactant

We demonstrate a new approach to manipulate the selective emission in mixed electrogenerated chemiluminescence (ECL) systems, where subtle changes in co-reactant properties are exploited to control the relative electron-transfer processes of excitation and quenching. Two closely related tertiary-amine co-reactants, tri-n-propylamine and N,N-diisopropylethylamine, generate remarkably different emission profiles: one provides distinct green and red ECL from [Ir(ppy)3] (ppy=2-phenylpyridinato-C2,N) and a [Ru(bpy)3](2+) (bpy=2,2'-bipyridine) derivative at different applied potentials, whereas the other generates both emissions simultaneously across a wide potential range. These phenomena can be rationalized through the relative exergonicities of electron-transfer quenching of the excited states, in conjunction with the change in concentration of the quenchers over the applied potential range.

Effects of polymer concentration and cationic surfactant on the morphology of electrospun polyacrylonitrile nanofibres

PAN nanofibres were prepared via an electrospinning process. The effect of polymer concentration on the fibre morphology was studied. At a very dilute solution, no fibres were obtained in the electrospinning process. As the concentration increased, the fibre morphology evolved from a beads-on-string structure to a uniform fibre structure with increasing fibre diameters. However, when the same electrospinning process was conducted with the addition of a cationic surfactant, the formation of disconnected beads was prevented, and the number of beads-on-string structures reduced significantly. In addition, the presence of cationic surfactant reduced the average diameter of the electrospun PAN nanofibres.

Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds

Fluidisation characteristics at different surfaces of a work-piece of complex geometry are conducted in a fluidised bed at various conditions including fluidising number, bed temperature and fluidising medium. The quenching of the work-piece is performed experimentally. In particular, the major frequency and energy of the pressure fluctuations are measured as a function of either fluidising velocity or heat transfer position and the results are used to develop a mathematic model. A computational model is developed to simulate gas dynamics and heat transfer between the fluidised bed and the work-piece surface, as well as simulating the temperature within the work-piece. The predicted cooling curves are in good agreement with the experimental results. Based on the simulation results, the flow characteristics of the gas and the temperature of the dense gas-solid phase near the work-piece surface are analysed to understand the heat transfer mechanism in the fluidised bed.

A complex relationship among chemical concentration, detection threshold and suprathreshold intensity of bitter compounds

Detection thresholds and psychophysical curves were established for caffeine, quinine-HCl (QHCl), and propylthiouracil (PROP) in a sample of 33 subjects (28 female mean age 24 ± 4). The mean detection threshold (±standard error) for caffeine, QHCl, and PROP was 1.2 ± 0.12, 0.0083 ± 0.001, and 0.088 ± 0.07 mM, respectively. Pearson product–moment analysis revealed no significant correlations between detection thresholds of the compounds. Psychophysical curves were constructed for each bitter compound over 6 concentrations. There were significant correlations between incremental points of the individual psychophysical curves for QHCl and PROP. Regarding caffeine, there was a specific concentration (6 mM) below and above which the incremental steps in bitterness were correlated. Between compounds, analysis of psychophysical curves revealed no correlations with PROP, but there were significant correlations between the bitterness of caffeine and QHCl at higher concentrations on the psychophysical curve (P < 0.05). Correlation analysis of detection threshold and suprathreshold intensity within a compound revealed a significant correlation between PROP threshold and suprathreshold intensity (r = 0.46–0.4, P < 0.05), a significant negative correlation for QHCl (r = –0.33 to –0.4, P < 0.05), and no correlation for caffeine. The results suggest a complex relationship between chemical concentration, detection threshold, and suprathreshold intensity.

The effects of exercise and adipose tissue lipolysis on plasma adiponectin concentration and adiponectin receptor expression in human skeletal muscle

Objective: It has been suggested that adiponectin regulates plasma free fatty acid (FFA) clearance by stimulating FFA uptake and/or oxidation in muscle. We aimed to determine changes in plasma adiponectin concentration and adiponectin receptor 1 and 2 mRNA expression in skeletal muscle during and after prolonged exercise under normal, fasting conditions (high FFA trial; HFA) and following pharmacological inhibition of adipose tissue lipolysis (low FFA trial; LFA). Furthermore, we aimed to detect and locate adiponectin in skeletal muscle tissue. Methods: Ten subjects performed two exercise trials (120 min at 50% VO2max). Indirect calorimetry was used to determine total fat oxidation rate. Plasma samples were collected at rest, during exercise and during post-exercise recovery to determine adiponectin, FFA and glycerol concentrations. Muscle biopsies were taken to determine adiponectin protein and adiponectin receptor 1 and 2 mRNA expression and to localise intramyocellular adiponectin. Results: Basal plasma adiponectin concentrations averaged 6.57±0.7 and 6.63±0.8 mg/l in the HFA and LFA trials respectively, and did not change significantly during or after exercise. In the LFA trial, plasma FFA concentrations and total fat oxidation rates were substantially reduced. However, plasma adiponectin and muscle adiponectin receptor 1 and 2 mRNA expression did not differ between trials. Immunohistochemical staining of muscle cross-sections showed the presence of adiponectin in the sarcolemma of individual muscle fibres and within the interfibrillar arterioles. Conclusion: Plasma adiponectin concentrations and adiponectin receptor 1 and 2 mRNA expression in muscle are not acutely regulated by changes in adipose tissue lipolysis and/or plasma FFA concentrations. Adiponectin is abundantly expressed in muscle, and, for the first time, it has been shown to be present in/on the sarcolemma of individual muscle fibres.

Use of in vitro critical inhibitory concentration, a novel approach to predict in vivo synergistic bactericidal effect of combined amikacin and piperacillin against pseudomonas aeruginosa in a systemic rat infection model

PURPOSE: This study was undertaken to explore the use of in vitro critical inhibitory concentration (CIC) as a surrogate marker relating the pharmacokinetic (PK) parameters to in vivo bactericidal synergistic effect [pharmacodynamic (PD)] of amikacin + piperacillin combination against Pseudomonas aeruginosa in a systemic rat infection model. METHODS: The in vitro antibacterial activities of amikacin and piperacillin, alone and in combinations at various ratios of the concentrations, were tested against a standard [5 x 10(5) colony-forming units (CFU)/ml] and a large (1.5 x 10(8) CFU/ml) inoculum of P. aeruginosa ATCC 9027 using a modified survival-time method. The CIC of each individual antibiotic for the different combinations was determined using a cup-plate method. In vivo studies were performed on Sprague-Dawley rats using a systemic model of infection with P. aeruginosa ATCC 9027. PK profiles and in vivo killing effects of the combination at different dosing ratios were studied. RESULTS: An inoculum effect was observed with the antibiotics studied. Synergy was seen against both the inocula at the following concentration ratios: 70% C(ami) + 30% C(pip) and 75% C(ami) + 25% C(pip), where C(ami) and C(pip) are the concentrations of amikacin and piperacillin to produce a 1000-fold decrease in bacterial population over 5 h, respectively. The CIC values determined corroborated with the order of in vitro bacterial killing observed for the antibiotic combinations. The dosing ratio of 12.6 mg/kg amikacin + 36 mg/kg piperacillin (a 70:30 ratio of the individual doses) exhibited the greatest killing in vivo when compared to the other ratios. The PK-PD relationships were described by simple, linear regression equations using the area under the in vivo killing curve as a PD marker and the AUCIC(ami)/CIC(ami) + AUCIC(pip)/CIC(pip), AUC(ami)/CIC(ami) + AUC(pip)/CIC(pip), C(max,ami)/CIC(ami) + C(max,pip)/CIC(pip), and AUCIC(ami)/MIC(ami) + AUCIC(pip)/MIC(pip) as PK markers for the amikacin + piperacillin combination. CONCLUSION: The combination of amikacin and piperacillin exhibited synergistic killing effect on P. aeruginosa that could be modeled using CIC as a surrogate marker relating the PK parameters to in vivo bactericidal effect.

Feed intake, growth, plasma glucose and urea nitrogen concentration, and cacass traits of lambs fed isoenergetic amounts of canola meal, soybean meal, and fish meal with forage based diet.

This experiment was conducted to examine the effect of feeding small, isoenergetic amounts of supplements containing high protein and functional lipid components, rather than the greater amounts of cereal and/or legume grains usually fed during the dry season in Australia, on dry matter intake (DMI), growth performance, plasma metabolites, and fat deposition in lambs consuming low quality roughage. Thirty two crossbred wether lambs ([Merino × Border Leicester] × Poll Dorset) were divided into four groups by stratified randomization according to liveweight (26–33 kg). After a 7-day adaptation to a hay diet (lucerne hay:oaten hay; 30:70), lambs were allocated to four treatments consisting of (1) basal diet of lucerne hay:oat hay (20:80; metabolizable energy (ME) = 7.0 MJ/kg DM), Basal; (2) basal + canola meal (84 g per day), CM; (3) basal + soymeal (75 g per day), SM; or (4) basal + fishmeal (80 g per day), FM. Daily hay and supplement DMI, and weekly liveweight were recorded during a 53-day experimental study. Blood samples were taken on day 1 and pre- and post-feeding on days 30 and 53 to measure changes in plasma glucose and plasma urea nitrogen (PUN) concentration. At the end of the experiment, lambs were slaughtered and hot carcass weight (HCW) recorded; cold carcass fatness (total muscle and adipose tissue depth at 12th rib, 110 mm from midline; GR) was determined at 24 h postmortem. Total DMI was increased (P < 0.001) in CM, SM and FM treatments, but basal hay DMI intake was only increased (P < 0.01) in CM and FM treatments compared with Basal treatment. This resulted in significant (P < 0.01) increases in metabolizable energy (ME) and crude protein (CP) intakes in all supplemented treatments, with the highest intakes recorded in the FM treatment. Liveweight gain (LWG) was significantly increased in CM and SM (P < 0.05) and FM (P < 0.01) treatments but HCW was significantly (P < 0.01) heavier slaughter only in the FM treatment. Feed conversion efficiency (P < 0.001) and GR fat at depth (P < 0.05) was reduced in all supplement treatments compared with Basal. Plasma glucose concentration was significantly (P < 0.05) increased after feeding in all treatments but there was no treatment effect. PUN was significantly increased over time in the supplemented treatments compared with the Basal treatment; there was no significant difference between supplement treatments by day 53. Results show that feeding small amounts of high protein and lipid-containing supplements improves production responses and are beneficial in producing carcasses with more lean compared with carcasses from lambs fed a low quality hay diet.

Changes in bacterial concentration in the liver correlate with that in the hepaticojejunostomy after bile duct reconstruction: implication in the pathogenesis of postoperative cholangitis

Postoperative cholangitis is a frequent and unpredictable complication of unknown etiology following bile duct reconstruction (BDR), particularly for biliary atresia. This study was undertaken to correlate the growth of bacteria in the hepaticojejunostomy with that in the liver after BDR. Quantitative bacterial culture was done on the specimens taken from the liver and from the hepaticojejunostomy at 1 week (group 1, n = 7), 1 month (group 2, n = 7), and 2 months (group 3, n = 7) following BDR with Roux-en-Y hepaticojejunostomy in piglets after 2 weeks of common bile duct ligation. The histological examination of the liver and the hepaticojejunostomy, as well as serial monitoring of hemogram and liver function tests, were performed to correlate the findings with the bacterial concentration of the liver and the hepaticojejunostomy following BDR. The bacterial concentration of the hepaticojejunostomy, expressed as log10 colony-forming units per gram (log10 CFU/g) of the hepaticojejunostomy, showed a progressive decrease from 8.38 ± 1.36 in group 1, 7.07 ± 2.54 in group 2, to 3.56 ± 1.31 in group 3 (p = 0.001). The log10 CFU/g of the liver also showed a progressive decrease from 5.02 ± 1.59 in group 1, 3.16 ± 1.56 in group 2, to 2.19 ± 1.09 in group 3 (p = 0.006). There was a significant positive correlation of the log10 CFU/g of the liver (n = 21) with that of the hepaticojejunostomy (n = 21) following BDR (r = 0.600, p = 0.004). Most of the infectious pathogens isolated from the liver were also isolated from the hepaticojejunostomy. The changes in hemoglobin, bilirubin, albumin, and ammonia significantly correlated with the changes of the bacterial concentration of the liver. The results of the study suggests that hepatic bacterial proliferation after BDR is significantly affected by microbial overgrowth in the bilioenteric anastomosis and is associated with deteriorated liver function and hemogram.

The influence of polymerization time and dopant concentration on the absorption of microwave radiation in conducting polypyrrole coated textiles

Temperature changes in conducting polypyrrole/para-toluene-2-sulphonic acid (PPy/pTSA) coated nylon textiles due to microwave absorption in the 8–9 GHz and 15–16 GHz frequency ranges were obtained by a thermography station during simultaneous irradiation of the samples. The temperature values are compared and related to the amounts of reflection, transmission and absorption obtained with a non-contact free space transmission technique, indicating a relationship between microwave absorption and temperature increase. Non-conductive samples showed no temperature increase upon irradiation irrespective of frequency range. The maximum temperature difference of around 4 °C in the conducting fabrics relative to ambient temperature was observed in samples having 48% absorption and 26.5 ± 4% reflection. Samples polymerized for 60 or 120 min with a dopant concentration of 0.018 mol/l or polymerized for 180 min with a dopant concentration of 0.009 mol/l yielded optimum absorption levels. As the surface resistivity decreased and the reflection levels increased, the temperature increase upon irradiation reduced.

Cage colour and post-harvest K+ concentration affect skin colour of Australian snapper Pagrus auratus (Bloch & Schneider, 1801)

In an attempt to improve post-harvest skin colour in cultured Australian snapper Pagrus auratus, a two-factor experiment was carried out to investigate the effects of a short-term change in cage colour before harvest, followed by immersion in K⁺-enriched solutions of different concentrations. Snapper supplemented with 39 mg unesterified astaxanthin kg⁻¹ for 50 days were transferred to black (for 1 day) or white cages (for 1 or 7 days) before euthanasia by immersing fish in seawater ice slurries supplemented with 0, 150, 300, 450 or 600 mmol L⁻¹ K⁺ for 1 h. Each treatment was replicated with five snapper (mean weight=838 g) held individually within 0.2 m³ cages. L*, a* and b* skin colour values of all fish were measured after removal from K⁺ solutions at 0, 3, 6, 12, 24 and 48 h. After immersion in K⁺ solutions, fish were stored on ice. Both cage colour and K⁺ concentration significantly affected post-harvest skin colour (P<0.05), and there was no interaction between these factors at any of the measurement times (P>0.05). Conditioning dark-coloured snapper in white surroundings for 1 day was sufficient to significantly improve skin lightness (L*) after death. Although there was no difference between skin lightness values for fish held for either 1 or 7 days in white cages at measurement times up to 12 h, fish held in white cages for 7 days had significantly higher L* values (i.e. they were lighter) after 24 and 48 h of storage on ice than those held only in white cages for 1 day. K⁺ treatment also affected (improved) skin lightness post harvest although not until 24 and 48 h after removal of fish from solutions. Before this time, K⁺ treatment had no effect on skin lightness. Snapper killed by seawater ice slurry darkened (lower L*) markedly during the first 3 h of storage in contrast with all K⁺ treatments that prevented darkening. After 24 and 48 h of storage on ice, fish exposed to 450 and 600 mmol L⁻¹ K⁺ were significantly lighter than fish from seawater ice slurries. In addition, skin redness (a*) and yellowness (b*) were strongly dependent on K⁺ concentration. The initial decline in response to K⁺ was overcome by a return of a* and b* values with time, most likely instigated by a redispersal of erythrosomes in skin erythrophores. Fish killed with 0 mmol L⁻¹ K⁺ maintained the highest a* and b* values after death, but were associated with darker (lower L*) skin colouration. It is concluded that a combination of conditioning snapper in white surroundings for 1 day before harvest, followed by immersion in seawater ice slurries supplemented with 300–450 mmol L⁻¹ K⁺ improves skin pigmentation after >24 h of storage on ice.

The influence of heat on biological activity and concentration of oleocanthal - a natural anti-inflammatory agent

Background – The olive oil phenolic, oleocanthal is a natural non-steroidal anti-inflammatory compound that irritates the oropharynx in a dose-dependent manner. It has been proposed that the biological activity of oleocanthal is partially responsible for the beneficial health effects of the Mediterranean diet. Virgin olive oil containing oleocanthal is often added as an ingredient in a number of cooked dishes and therefore it is of great importance to understand how best to preserve the putative health promoting benefits of this compound, as olive oil phenolics are
subject to heat degradation.

Objective – To investigate if oleocanthal is thermally degraded or its biological activity reduced during cooking.

Design – One extra virgin olive oil containing 54mg/kg oleocanthal was heated at varying temperatures (100°C, 170°C and 240°C) for set time periods (0, 1, 5, 20, 60, 90 min). Oleocanthal concentrations were quantified using HPLC and its biological activity determined with a taste bioassay measuring the intensity of throat irritation.

Outcomes – Results demonstrated that oleocanthal was heat stable compared with other olive oil phenolics, with a maximum loss of 16% as determined by HPLC analysis. In contrast, there was a significant decrease of up to 38% (p<0.05) in the biological activity of oleocanthal as determined by the taste bioassay.

Conclusions – Minimal degradation of oleocanthal concentration was observed upon heating however a significant decrease in the biological activity of this compound was noted with extended heating time. This has important implications for health in that, consumers may be unable to reap all of the putative health benefits associated with oleocanthal when adding virgin olive oil as an ingredient to dishes requiring prolonged heat treatment.

The relationship betwen NaCl concentration and taste perception of saltiness in bread

Background – Sodium (Na+ ) is present in food in the form of sodium chloride (NaCl). There is strong evidence that high dietary Na+ intakes increase the risk of developing various adverse health conditions. Many international organisations encourage Na+ reduction in both the diet and the food supply. One of the major dietary sources of NaCl is bread, where NaCl has the essential function of imparting flavour. At present, no literature has been published examining taste interactions that may play a role in limiting the maximum saltiness perception in bread.
Objective – To determine the extent the physical structure of bread inhibits salty taste perception. Additionally, to determine whether common commercial bread additives suppress saltiness of bread.
Design – Subjects (n=14, 12 females) tasted and rated samples with varying NaCl concentrations in water (0 – 1724 mg NaCl/100 g) and bread (125 – 1550 mg NaCl/100 g) using the general Labelled Magnitude Scale. Psychophysical curves plotting NaCl concentration against NaCl intensity were constructed for water and bread. Breads of fixed NaCl concentration (1125 mg NaCl/100 g) and various common additives (sucrose, soya flour, canola oil, gluten) were also rated to assess perceived saltiness.
Outcomes – There was a significant difference between Na+ psychophysical curves in water and bread (P<0.05) with the bread matrix suppressing maximum possible saltiness by 25% to 70%. Suppression of saltiness was observed after the addition of sucrose (55% decrease) or soya flour (60% decrease) during bread production compared to prototypical bread (both P<0.05).
Conclusions – The physical structure of bread and some common additives have a major influence on perceptual saltiness of bread. The removal of additives that suppress saltiness combined with strategies to modify the texture of bread could lead to significant reduction in dietary Na+, whilst maintaining optimal salty taste.