Objective classification of fabric pilling based on the two-dimensional discrete wavelet transform

A number of methods for automated objective ratings of fabric pilling based on image analysis are described in the literature. The periodic structure of fabrics makes them suitable candidates for frequency domain analysis. We propose a new method of frequency domain analysis based on the two-dimensional discrete wavelet transform to objectively measure pilling intensity in sample images. We present a preliminary evaluation of the proposed method based on analysis of two series of standard pilling evaluation test images. The initial results suggest that the proposed method is feasible, and that the ability of the method to discriminate between levels of pilling intensity depends on the wavelet analysis scale being closely matched to the fabric interyarn pitch. We also present a heuristic method for optimal selection of an analysis wavelet and associated analysis scale.

Evaluating the robustness of objective pilling classification with the two-dimensional discrete wavelet transform

Previously, we proposed a new method of frequency domain analysis based on the two-dimensional discrete wavelet transform to objectively measure pilling intensity in sample fabric images. We have further evaluated this method, and our results indicate that it is robust to small horizontal and/or vertical translations and to significant variations in the brightness of the image under analysis, and is sensitive to rotation and to dilation of the image. These results suggest that as long as precautions are taken to ensure fabric test samples are imaged under consistent conditions of weave/knit pattern alignment (rotation) and apparent interyarn pitch (dilation), the method will yield repeatable results.

Image matching using TI multi-wavelet transform

A multi-resolution image matching technique based on multiwavelets followed by a coarse to fine strategy is presented. The technique addresses the estimation of optimal corresponding points and the corresponding disparity maps in the presence of occlusion, ambiguity and illuminative variations in the two perspective views taken by two different cameras or at different lighting conditions. The problem of occlusion and ambiguity is addressed by a geometric topological refining approach along with the uniqueness constraint whereas the illuminative variation is dealt by using windowed normalized correlation.

Disparity estimation using TI multi-wavelet transform

A multi-resolution image matching technique based on translation invariant discrete multi-wavelet transform followed by a coarse to fine matching strategy is presented. The technique addresses the estimation of optimal corresponding points and the corresponding disparity maps in the presence of occlusion, ambiguity and illuminative variations in the two perspective views taken by two different cameras or at different lighting conditions. The problem of occlusion and ambiguity is addressed explicitly by a geometric optimization approach along with the uniqueness constraint whereas the illuminative variation is dealt with by using windowed normalized correlation on the discrete multi-wavelet coefficients.

Objective assessment of pilling of nonwoven fabrics using the two dimensional discrete wavelet transform

Fabric pilling is a serious problem for the apparel industry, causing an unsightly appearance and premature wear. Woolen products are particularly prone to pilling. Recently, a process for production of woolen nonwoven apparel fabrics has been commercialized in Australia, and may lead to new markets for Australian wool. However, the success of such nonwoven fabrics will partly rely on their propensity to pill. A key element in the control of fabric pilling is the evaluation of resistance to pilling by testing. Resistance to pilling is normally tested in the laboratory by processes that simulate accelerated wear, followed by a manual assessment of the degree of pilling by an expert based on a visual comparison of the sample to a set of test images. To bring more objectivity into the pilling rating process, a number of automated systems based on image analysis have been developed. The authors previously proposed a new method of image analysis based on the two-dimensional discrete wavelet transform to objectively measure the pilling intensity for woven fabrics. This paper presents preliminary work in extending this method to nonwoven fabrics.

Review: The preliminary study for the interpretation of electrochemical noise with continuous wavelet transform

Random fluctuations of the electrical quantities (electrode potential and cell current) in electrochemical systems commonly are referred to as electrochemical noise (ECN). The ECN signal for the corrosion of mild steel in reinforced concrete specimen was analyzed with the Continuous Wavelet Transform (CWT). The original signal was transformed into a time-frequency phase plane with colors representing the coefficients of the CWT. The signal shows a self-similarity structure in the phase plane. Through this way, the chaotic nature of corrosion process is manifested.

Feature extraction and classification of metal detector signals using the wavelet transform and the fuzzy ARTMAP neural network

In this paper, the Fuzzy ARTMAP (FAM) neural network is used to classify metal detector signals into different categories for automated target discrimination. Feature extraction of the metal detector signals is conducted using a wavelet transform technique. The FAM neural network is then employed to classify the extracted features into different target groups. A series of experiments using individual FAM networks and a voting FAM network is conducted. Promising classification accuracy rates are obtained from using individual and voting FAM networks, respectively. The experimental outcomes positively demonstrate the effectiveness of the generated features, and of the FAM network in classifying metal detector signals for automated target discrimination tasks.

Determination of embedment depth of timber poles and piles using wavelet transform

This paper presents an investigation on the wave propagation in timber poles with Wavelet Transform (WT) analysis for identification of the condition and underground depth of embedded timber poles in service. Most of non-destructive testing (NDT) applications for timber poles using wave-based methods consider only single wave mode and no dispersion. However, for wave propagations in timber poles (damaged/undamaged), such simplification may not be correct, especially for broad band excitation using impulse impact. To investigate the problem, a 5m timber pole was investigated numerically and experimentally. A dispersion curve is generated from the numerical results to provide guidance on the velocity and wave mode selection. Continuous wavelet transform (CWT) is applied on the same signal to verify the presence of modes and to process data from experimental testing. The results are presented in both time domain and time-frequency domain for comparison. The results of the investigation showed that, wavelet transform analysis can be a reliable signal processing tool for NDT in terms of condition and embedment length determination.

Determinations of stress wave velocity in a timber pole using wavelet transform

This paper presents an application of Wavelet Transfonn (WT) for determination of stress wave velocity for Non-destructive Testing of timber utility poles in service. For surface Non-destructive Testing (NDT), the hammer impact, which produces generally broadband frequency excitation, is used to generate stress wave. Moreover, due to practicality the impact location for field testing of a utility pole is on the side of the pole and 1.5 m above ground level. And the geometry of utility pole could not guarantee non-dispersive longitudinal wave. All of these issues have resulted in lack of accuracy and reliability of results from surface NDT in field testing. In recognition of such problem, this research explores methods to reliably calculate desired wave velocity by isolating wave mode and studying dispersive nature of utility pole. Fast Fourier Transfonn (FFT) is firstly conducted to determine the suitable frequency from a stress wave data. Then WT is applied on the wave data mentioned to perfonn time-frequency analysis. Velocity can be detennined by time history data of desired frequency from WT results which will be compared with the available analytical solution for longitudinal wave velocity. The results of the investigation showed that wavelet transfonn analysis can be a reliable signal processing tool for non-destructive testing in tenns of velocity detennination, which in tum also helps to detennine the embedded length of the timber pole.

Objective pilling evaluation of wool fabrics

An objective pilling evaluation method based on the multi-scale two-dimensional dual-tree complex wavelet transform and linear discriminant function of Bayes' Rule was developed. The surface fuzz and pills are identified from the high-frequency noise, fabric textures, fabric surface unevenness, and illuminative variation of a pilled fabric image by the two-dimensional dual-tree complex wavelet decomposition and reconstruction. The energies of the reconstructed subimages in six spatial orientations (±15º, ±45º, ±75º) are calculated as the elements of the pilling feature vector, whose dimension is reduced by principal component analysis. A linear discriminant function of Bayes' Rule was used as a classifier to establish classification rules among the five pilling grades. A new pilled sample with the same physical construction can then be automatically assigned to one of the five pilling grades by the classification rules. A general evaluation of the proposed method was conducted using the SM50 woven, non-woven, and SM54 knitted standard pilling test image sets. The results suggest that the new method can successfully establish classification rules among the five pilling grade groups for each of the three standard pilling test image sets and should be applicable to practical objective pilling evaluation.

New methods for objective evaluation of fabric pilling by frequency domain image processing

Fabric pilling is a serious problem for the apparel industry. Resistance to pilling is normally tested by simulated accelerated wear and manual assessment of degree of pilling based on a visual comparison of the sample to a set of test images. A number of automated systems based on image analysis have been developed. The authors propose new methods of image analysis based on the two-dimensional wavelet transform to objectively measure the pilling intensity in sample images. Initial work employed the detail coefficients of the two-dimensional discrete wavelet transform (2DDWT) as a measure of the pilling intensity of woven/knitted fabrics.

This method is shown to be robust to image translation and brightness variation. Using the approximation coefficients of the 2DDWT, the method is extended to non-woven pilling image sets. Wavelet texture analysis (WTA) combined with principal components analysis are shown to produce a richer texture description of pilling for analysis and classification. Finally, employing the two-dimensional dual-tree complex wavelet transform as the basis for the WTA feature vector is shown to produce good automated classification on a range of standard pilling image sets.