Cellulose and hemicellulose digestion by herbivorous terrestrial crustaceans

Cellulose, the main component of plant cell walls, is insoluble and difficult to digest enzymatically. This research discovered that herbivorous land crabs have an efficient gastric mill in the stomach which disrupts this insoluble material, and a range of highly specialised enzymes that can then break down the cellulose.

Anaerobic degradation of organic materials - significance of the substrate surface area

In anaerobic degradation of substrates containing mainly particulate organic matter, solids hydrolysis is rate-limiting. In these investigations, the particle size of various substrates was reduced by comminution to support hydrolysis. Two positive effects of comminution were observed. For substrates with high fibre content, which are particularly resistant to biodegradation, a significant improvement of the degradation degree was observed as a result of comminution. Secondly, for all substrates tested, and particularly for those rich in fibres, the degradation rate of comminuted samples was significantly higher. The first reason for both effects is an increase of the sample surface area. Several methods for measuring the specific surface area of organic materials, including particle size analysis, Nitrogen-adsorption and enzyme adsorption, were used and compared for the purpose of this study, where the surface area accessible to microbial enzymes is critical. The significance of the surface area in anaerobic degradation of particulate substrates was investigated through a kinetic model where the hydrolysis rate was based on the sample surface area. Good agreements were obtained between model and experiments carried out with samples of various specific surface areas. These results reinforced the significance of the sample surface area in anaerobic degradation processes. However, other effects of comminution responsible for the increased degradation degree and degradation rate were identified and discussed. These include: the increase of dissolved compounds due to cell rupture, exposition of surface areas previously inaccessible for microbial degradation, and alteration of the sample structure such as the lignin-cellulose arrangements.

Presence and properties of cellulase and hemicellulase enzymes of the gecarcinid land crabs Gecarcoidea natalis and Discoplax hirtipes.

Digestive juice from the herbivorous gecarcinid land crabs Gecarcoidea natalis and Discoplax hirtipes exhibited total cellulase activity and activities of two cellulase enzymes; endo-ß-1,4-glucanase and ß-1,4-glucosidase. These enzymes hydrolysed native cellulose to glucose. The digestive juice of both species also contained laminarinase, licheninase and xylanase, which hydrolysed laminarin, lichenin and xylan, respectively, to component sugars. The pH optima of ß-1,4-glucosidase, endo-ß-1,4-glucanase and total cellulase from G. natalis were 4–5.5, 5.5 and 5.5–7, respectively. In the digestive juice from D. hirtipes, the corresponding values were 4–7, 5.5–7 and 4–9, respectively. The pH of the digestive juice was 6.69±0.03 for G. natalis and 6.03±0.04 for D. hirtipes and it is likely that the cellulases operate near maximally in vivo. In G. natalis, total cellulase activity and endo-ß-1,4-glucanase activity were higher than in D. hirtipes, and the former species can thus hydrolyse cellulose more rapidly. ß-1,4-glucosidase from G. natalis was inhibited less by glucono-D-lactone (Ki=11.12 mmol l-1) than was the ß-1,4-glucosidase from D. hirtipes (Ki=4.53 mmol l-1). The greater resistance to inhibition by the ß-1,4-glucosidase from G. natalis may contribute to the efficiency of the cellulase system in vivo by counteracting the effects of product inhibition and possibly dietary tannins. The activity of ß-1,4-glucosidase in the digestive juice of D. hirtipes was higher than that of G. natalis.

Dietary assimilation and the digestive strategy of the omnivorous anomuran land crab Birgus latro (Coenobitidae).

On Christmas Island, Indian Ocean, the diet of robber crabs, Birgus latro (Linnaeus) was generally high in fat, storage polysaccharides or protein and largely comprised fruits, seeds, nuts and animal material. The plant items also contained significant amounts of hemicellulose and cellulose. In laboratory feeding trials, crabs had similar intakes of dry matter when fed artificial diets high in either fat or storage polysaccharide, but intake was lower on a high protein diet. Assimilation coefficients of dry matter (69–74%), carbon (72–81%), nitrogen (76–100%), lipid (71–96%) and storage polysaccharide (89–99%) were high on all three diets. B. latro also assimilated significant amounts of the chitin ingested in the high protein diet ( 93%) and hemicellulose (49.6–65%) and cellulose (16–53%) from the high carbohydrate and high fat diets. This is consistent with the presence of chitinase, hemicellulase and cellulase enzymes in the digestive tract of B. latro. The mean retention time (27.2 h) for a dietary particle marker (⁵⁷Co-labelled microspheres) was longer than measured in leaf-eating land crabs. The feeding strategy of B. latro involves the selection of highly digestible and nutrient-rich plant and animal material and retention of the digesta for a period long enough to allow extensive exploitation of storage carbohydrates, lipids, protein and significant amounts of structural carbohydrates (hemicellulose, cellulose and chitin).

Preparation and characterization on cellulose nanofiber film

In this study, cellulose nanofibers were obtained from wood pulp using a chemo-mechanical method and thin films were made of these cellulose nanofibers. The morphology of the films was studied by scanning electron microscopy (SEM). SEM image analysis revealed that the films were composed of cellulose nanofibers with an average diameter of around 32 nm. Other properties were also characterized, including the degree of crystallinity by X-ray diffraction, chemical bonding by infrared attenuated total reflectance analysis, and thermal properties by differential scanning calorimetry. The foldable, strong, and optically translucent cellulose nanofiber films thus obtained have many potential applications as micro/nano electronic devices, biosensors and filtration media, etc.

The last piece in the cellulase puzzle : the characterisation of β-glucosidase from the herbivorous gecarcinid land crab Gecarcoidea natalis

A 160 kDa enzyme with β-glucosidase activity was purified from the midgut Gland of the land crab Gecarcoidea natalis. The enzyme was capable of releasing glucose progressively from cellobiose, cellotriose or cellotetraose. Although β-glucosidases (EC 3.2.1.21) have some activity towards substrates longer than cellobiose, the enzyme was classified as a glucohydrolase (EC 3.2.1.74) as it had a preference for larger substrates (cellobiose<cellotriose=cellotetraose). It was able to synthesise some cellotetraose by the transglycosylation of smaller substrates – another common feature of glucohydrolases. The interaction between the glucohydrolase described here and the endo-β-1,4-glucanases described previously for G. natalis provides a complete model for cellulose hydrolysis in crustaceans and possibly in other invertebrates. After mechanical fragmentation by the gastric mill, multiple endo-β-1,4-glucanases would initially cleave β-1,4-glycosidic bonds within native cellulose, releasing small oligomers, including cellobiose, cellotriose and cellotetraose. The glucohydrolase would then attach to these oligomers, progressively releasing glucose. The glucohydrolase might also attach directly to crystalline cellulose to release glucose from free chain ends. This two-enzyme system differs from the traditional model, which suggests that total cellulose hydrolysis requires the presence an endo-β-1,4-glucanse, a cellobiohydrolase and a β-glucosidase

Blend films of natural wool and cellulose prepared from an ionic liquid

Natural wool/cellulose blends were prepared in an ionic liquid green solvent, 1-butyl-3-methylimidazolium chloride (BMIMCl) and the films were formed subsequently from the coagulated solutions. The wool/cellulose blend films show significant improvement in thermal stability compared to the coagulated wool and cellulose. Moreover, the blend films exhibited an increasing trend of tensile strength with increase in cellulose content in the blends which could be used for the development of wool-based materials with improved mechanical properties, and the elongations of the blends were considerably improved with respect to the coagulated films of wool and cellulose. It was found that there was hydrogen bonding interaction between hydroxyl groups of wool and cellulose in the coagulated wool/cellulose blends as determined by Fourier transform infrared (FTIR) spectroscopy. The ionic liquid was completely recycled with high yield and purity after the blend film was prepared. This work presents a green processing route for development of novel renewable blended materials from natural resource with improved properties.

Effect of cellulose nanofiber dimensions on sheet forming through filtration

Four different cellulose nanofibers samples were prepared from northern bleached softwood kraft fibers. Fiber diameter distributions were measured from SEM images. Fiber aspect ratios ranging from 84 to 146 were estimated from fiber suspension sedimentation measurements. Three samples had heterogeneous distributions of fiber diameters, while one sample was more homogeneous. Sheet forming experiments using filters with pores ranging from 150 to 5 μm showed that the samples with a heterogeneous distribution of fiber dimensions could be easily formed into sheets at 0. 2% initial solids concentration with all filter openings. On the other hand, sheets could only be formed from the homogenous sample by using 0. 5% or more initial solids content and a lower applied vacuum and smaller filter openings. The forming data and estimated aspect ratios show reasonable agreement with the predictions of the crowding number and percolation theories for the connectivity and rigidity thresholds for fiber suspensions.

Fabrication of carbon nanofiber by pyrolysis of freeze-dried cellulose nanofiber

The possibility of fabricating carbon nanofibers from cellulose nanofibers was investigated. Cellulose nanofiber of ~50 nm in diameter was produced using ball milling in an eco-friendly manner. The effect of the drying techniques of cellulose nanofibers on the morphology of carbon residue was studied. After pyrolysis of freeze-dried cellulose nanofibers below 600 °C, amorphous carbon fibers of ~20 nm in diameter were obtained. The pyrolysis of oven-dried precursors resulted in the loss of original fibrous structures. The different results arising from the two drying techniques are attributed to the difference in the spatial distance between cellulose nanofiber precursors.