Analytical modeling of interconnection networks in heterogeneous multi-cluster systems

In data-intensive distributed systems, replication is the most widely used approach to offer high data availability, low bandwidth consumption, increased fault-tolerance and improved scalability of the overall system. Replication-based systems implement replica control protocols that enforce a specified semantics of accessing the data. Also, the performance depends on a number of factors, the chief of which is the protocol used to maintain consistency among object replica. In this paper, we propose a new low-cost and high data availability protocol called the box-shaped grid structure for maintaining consistency of replicated data on networked distributed computing systems. We show that the proposed protocol provides high data availability, low communication costs, and increased fault-tolerance as compared to the baseline replica control protocols.

Analytical modeling of communication latency in multi-cluster systems

This paper addresses the problem of performance modeling of large-scale distributed systems with emphasis on communication networks in heterogeneous multi-cluster systems. The study of interconnection networks is important because the overall performance of a distributed system is often critically hinged on the effectiveness of this part. We present an analytical model to predict message latency in multi-cluster systems in the presence of processor heterogeneity. The model is validated through comprehensive simulation, which demonstrates that the proposed model exhibits a good degree of accuracy for various system sizes and under different operating conditions.

Analytical modeling of partially shaded photovoltaic systems

As of today, the considerable influence of select environmental variables, especially irradiance intensity, must still be accounted for whenever discussing the performance of a solar system. Therefore, an extensive, dependable modeling method is required in investigating the most suitable Maximum Power Point Tracking (MPPT) method under different conditions. Following these requirements, MATLAB-programmed modeling and simulation of photovoltaic systems is presented here, by focusing on the effects of partial shading on the output of the photovoltaic (PV) systems. End results prove the reliability of the proposed model in replicating the aforementioned output characteristics in the prescribed setting. The proposed model is chosen because it can, conveniently, simulate the behavior of different ranges of PV systems from a single PV module through the multidimensional PV structure.

Analytical communication networks model for enterprise grid computing

This paper addresses the problem of performance analysis based on the communication modeling of large-scale heterogeneous distributed systems, with an emphasis on enterprise Grid computing systems. The study of communication layers is important, as the overall performance of a distributed system often critically hinges on the effectiveness of this part. We propose an analytical model that is based on probabilistic analysis and queuing networks. The proposed model considers the processor as well as network heterogeneity of the enterprise Grid system. The model is validated through comprehensive simulations, which demonstrate that the proposed model exhibits a good degree of accuracy for various system sizes, and under different working conditions.

Analytical interconnection networks model for multi-cluster computing systems

This paper addresses the problem of interconnection networks performance modeling of large-scale distributed systems with emphases on multi-cluster computing systems. The study of interconnection networks is important because the overall performance of a distributed system is often critically hinged on the effectiveness of its interconnection network. We present an analytical model that considers stochastic quantities as well as processor heterogeneity of the target system. The model is validated through comprehensive simulation, which demonstrates that the proposed model exhibits a good degree of accuracy for various system sizes and under different operating conditions.

Performance modeling and analysis of heterogeneous meta-computing systems interconnection networks

The overall performance of a distributed system often depends on the effectiveness of its interconnection network. Thus, the study of the communication networks for distributed systems is very important, which is the focus of this paper. In particular, we address the problem of interconnection networks performance modeling for heterogeneous meta-computing systems. We consider the meta-computing system as a typical multi-cluster system. Since the heterogeneity is becoming common in such systems, we take into account network as well as cluster size heterogeneity to propose the model. To this end, we present an analytical network model and validate the model through comprehensive simulation. The results of the simulation demonstrated that the proposed model exhibits a good degree of accuracy for various system organizations and under different working conditions.

Construction supply chain modeling : a research review and interdisciplinary research agenda

Supply chain management has emerged as a popular and useful concept in the construction industry and research community since the mid 1990s. Research in construction supply chain management draws from a broad range of disciplines, notably: (1) Industrial organization economics to better understand market structure and forces and their effect on firm and supply chain behavior and (2) Analytic modeling of supply chains to improve supply chain performance along metrics such as speed, cost, reliability, quality, etc. Both industrial organization and analytic modeling provide useful but ultimately incomplete perspectives and prescriptions for construction supply chain management. As such, this paper proposes development of an interdisciplinary research agenda that draws from both fields. Towards that agenda, a review of research is presented to introduce the main ideas, relevant literature, and theory and methods in each of the two areas. From these independent reviews, applications that could benefit from a combined perspective are identified and used as a basis for development of an interdisciplinary research agenda.

Multi-cluster computing interconnection network performance modeling and analysis

The overall performance of a distributed system often depends on the effectiveness of its interconnection network. Thus, the study of the communication networks for distributed systems–which is the focus of this paper–is very important. In particular, we address the problem of fat-tree based interconnection networks performance modeling for multi-user heterogeneous multi-cluster computing systems. To this end, we present an analytical model and validate the model through comprehensive simulation. The results of the simulation demonstrate that the proposed model exhibits a good degree of accuracy for various system organizations and under different working conditions. On the basis of the validated model, we propose an adaptive assignment function based on the existing heterogeneity of the system to minimize multi-user environment overhead.

Power penalty assessment of OXADM device model - analytical analysis

This OXADM are located in the nodes, which have more than two switching directions in ring networks. The function of OXADM is to flexibility switch the wavelengths among the different input and output ports. Because of the OXADM's imperfect performance, the insertion loss and crosstalk are induced in the system. Analytical modeling method is using to analyze the OXADM structure in crosstalk or power leakage that lead to the power penalty. To overcome this problem, power penalty is needed to be supplied. The insertion of this power penalty depends on few parameters. The parameters that we going to investigate here will be in term of number of operating wavelengths and number of input/output ports as well as the Q factor. The variation of this parameters will affects the amount of the desired power penalty. Simulation results in higher crosstalk or higher power penalty needed as the number of OXADM increases. As the sum of the wavelength and the number of input/output for each OXADM increases, the power penalty will increased as well. Investigation on the maximum Q factors is 6 to get the minimum power penalty at the lowest BER for most of the combination of the sum of the wavelength and the number of input/output for each OXADM.

An analytical model on the propagation of modern email worms

Email worms propagate across networks by taking advantage of email relationships. Modeling the propagation of email worms can help predict their potential damages and develop countermeasures. We propose a novel analytical model on the propagation process of modern reinfection email worms. It relies on probabilistic analysis, and thus can provide a steady and reliable assessment on the propagation dynamics. Additionally, by introducing virtual users to represent the repetitious spreading process, the proposed model overcomes the computational challenge caused by reinfection processes. To demonstrate the benefits of our model, we conduct a series of experimental evaluation. The results show that our novel approach achieves a greater accuracy and is more suitable for modeling modern email worms than previous models.

A performance model for analysis of heterogeneous multi-cluster systems

This paper addresses the problem of performance modeling for large-scale heterogeneous distributed systems with emphases on multi-cluster computing systems. Since the overall performance of distributed systems is often depends on the effectiveness of its communication network, the study of the interconnection networks for these systems is very important. Performance modeling is required to avoid poorly chosen components and architectures as well as discovering a serious shortfall during system testing just prior to deployment time. However, the multiplicity of components and associated complexity make performance analysis of distributed computing systems a challenging task. To this end, we present an analytical performance model for the interconnection networks of heterogeneous multi-cluster systems. The analysis is based on a parametric family of fat-trees, the m-port n-tree, and a deterministic routing algorithm, which is proposed in this paper. The model is validated through comprehensive simulation, which demonstrated that the proposed model exhibits a good degree of accuracy for various system organizations and under different working conditions.

Analysis of multi-cluster computing systems with processor heterogeneity

This paper addresses the problem of performance modeling of heterogeneous multi-cluster computing systems. We present an analytical model that can be employed to explore the effectiveness of different design approaches so that one can have an intelligent choice during design and evaluation of a cost effective large-scale heterogeneous distributed computing system. The proposed model considers stochastic quantities as well as processor heterogeneity of the target system. The analysis is based on a parametric fat-tree network, the m-port n-tree, and a deterministic routing algorithm. The correctness of the proposed model is validated through comprehensive simulation of different types of clusters.

Construction supply chain management : a research review and interdisciplinary research agenda

Supply chain management has emerged as a popular and useful concept in the construction industry and research community since the mid 1990s. Research in construction supply chain management draws from a broad range of disciplines, notably: (1) industrial organization economics to better understand market structure and forces and their effect on firm and supply chain behavior and (2) Analytic modeling of supply chains to improve supply chain performance along metrics such as speed, cost, reliability, quality, etc. Both industrial organization and analytic modeling provide useful but ultimately incomplete perspectives and prescriptions for construction supply chain management. As such, this paper proposes development of an interdisciplinary research agenda that draws from both fields. Towards that agenda, a review of research is presented to introduce the main ideas, relevant literature, and theory and methods in each of the two areas. From these independent reviews, applications that could benefit from a combined perspective are identified and used as a basis for development of an interdisciplinary research agenda.