Influence of low-strain deformation characteristics of high strength sheet steel on curl and springback in bend-under-tension tests

The influence of low-strain deformation behavior on curl and springback in advanced high strength steels (AHSS) was assessed using a bend-under-tension test. The effect of yielding behavior on curl and springback was examined by heat-treating two dual-phase steels to induce yield point elongation, while keeping a relatively constant tensile strength and a constant sheet thickness. A dual-phase and TRIP steel with similar initial thickness and tensile strengths were also examined to investigate the effect of work-hardening on curl and springback. It is shown that while current understanding limits prediction of curl and springback in bending under tension using only the initial sheet thickness and tensile strength, both the yielding and work-hardening behavior can affect the results. Explanations for these effects are proposed in terms of the discontinuous yielding and flow stress in the materials.

Culture-based fisheries in non-perennial reservoirs of Sri Lanka: influence of reservoir morphometry and stocking density on yield

Culture-based fish yield in non-perennial reservoirs of Sri Lanka was related to reservoir morphometry and stocking density. The reservoirs were stocked mainly with fingerlings of one Chinese and three Indian major carp species, common carp, Cyprinus carpio L., and the genetically improved farmed tilapia strain of Nile tilapia, Oreochromis niloticus (L.), at four pre-determined species combinations and a range of stocking densities [SD (fingerlings ha⁻¹)]. Twenty-three reservoirs were harvested successfully at the end of the culture period of 2002–2003. Basic limnological and morphometric parameters, including shoreline development (D_L) and shoreline area ratio (R_LA), were estimated for each of the 23 reservoirs. Bray–Curtis similarity and non-metric multidimensional scaling using mean values of limnological data revealed that reservoirs could be ordinated into two major clusters, one with intact sample distribution due to similar trophic characteristics and the other with scattered sample distribution. Reservoirs in the cluster with similar trophic characteristics showed significant correlation (P < 0.05) between R_LA and total fish yield (Y). A multiple regression equation, Y = −693 + 4810 R_LA + 0.484 SD, was generated to estimate fish harvest in relation to SD.

Electron backscatter diffraction (EBSD) map of AZ31 compressed to 1% strain at room temperature in a direction parallel to the extrusion direction

The collection contains an EBSD map of AZ31 compressed to 1% strain at room temperature in a direction parallel to the extrusion direction. The map was collected as part of an investigation into the role of twinning in the occurrence of a yield point elongation during deformation.

An experimental investigation of edge strain and bow in roll forming a V-section

V-sections were roll formed from two grades of steel, and the strain on the top and bottom of the strip near the edge was measured using electrical resistance strain gauges. The channels were bent to a radius of 2 and 15 mm along the centerline. The steel strips were of mild and dual phase steel of yield strength 367 MPa and 597 MPa respectively. The longitudinal bow was measured using a 3-dimensional scanning system. The strain measurements were analysed to determine bending and mid-surface strains at the edge during forming. The peak longitudinal edge strain increased with material yield strength for both profile radii. For the 15 mm radius, the bow was larger in the dual phase steel than in the mild steel. For the 2 mm profile radius, the bow was smaller compared with the 15 mm profile radius and it was similar for both steels. It was observed that the difference between the peak longitudinal edge strain and yield strength to Youngs modulus ratio of the material is an important factor in determining longitudinal bow.

Variation of yield loci in finite element analysis by considering texture evolution for AA5042 aluminum sheets

 Yield function has various material parameters that describe how materials respond plastically in given conditions. However, a significant number of mechanical tests are required to identify the many material parameters for yield function. In this study, an effective method using crystal plasticity through a virtual experiment is introduced to develop the anisotropic yield function for AA5042. The crystal plasticity approach was used to predict the anisotropic response of the material in order to consider a number of stress or strain modes that would not otherwise be evident through mechanical testing. A rate-independent crystal plasticity model based on a smooth single crystal yield surface, which removes the innate ambiguity problem within the rate-independent model and Taylor model for polycrystalline deformation behavior were employed to predict the material’s response in the balanced biaxial stress, pure shear, and plane strain states to identify the parameters for the anisotropic yield function of AA5042.

Uniform elongation and the stress-strain flow curve of steels calculated from hardness using empirical correlations

An empirical relationship between the hardness and uniform elongation of non-Austenitic hypoeutectoid steels has been developed. This new hardness-elongation relationship was combined with previously developed correlations of hardness and strength (yield and ultimate tensile strength) to predict the stressstrain flow curve from a single hardness test. The current study considers both power law hardening behavior and exponential hardening behavior. Reasonable agreement was observed between the experimental and predicted flow curves of a high strength, low alloy steel. Additionally, an empirical correlation of the flow strength at instability with hardness is provided. © ASM International.

Strain-responsive polyurethane/PEDOT:PSS elastomeric composite fibers with high electrical conductivity

It is a challenge to retain the high stretchability of an elastomer when used in polymer composites. Likewise, the high conductivity of organic conductors is typically compromised when used as filler in composite systems. Here, it is possible to achieve elastomeric fiber composites with high electrical conductivity at relatively low loading of the conductor and, more importantly, to attain mechanical properties that are useful in strain-sensing applications. The preparation of homogenous composite formulations from polyurethane (PU) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) that are also processable by fiber wet-spinning techniques are systematically evaluated. With increasing PEDOT:PSS loading in the fiber composites, the Young's modulus increases exponentially and the yield stress increases linearly. A model describing the effects of the reversible and irreversible deformations as a result of the re-arrangement of PEDOT:PSS filler networks within PU and how this relates to the electromechanical properties of the fibers during the tensile and cyclic stretching is presented. Conducting elastomeric fibers based on a composite of polyurethane (PU) and PEDOT:PSS, produced by a wet-spinning method, have high electrical conductivity and stretchability. These fibers can sense large strains by changes in resistance. The PU/PEDOT:PSS fiber is optimized to achieve the best strain sensing. PU/PEDOT:PSS fibers can be produced on a large scale and integrated into conventional textiles by weaving or knitting. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Understanding response surface optimisation to the modeling of Astaxanthin extraction from a novel strain Thraustochytrium sp. S7

A fast growing, highly orange color pigmented strain of Thraustochytrids was isolated from New Zealand marine waters. This strain showed efficient utilization of glycerol as carbon source and produced significant amount of cell dry biomass (2.08gL-1), TFA (30.15% of dry cell weight), DHA (27.83% of TFA) and astaxanthin (131.56μgg-1). Astaxanthin is the dominant constituent in the carotenoid profile of Thraustochytrium sp. S7 and is an important antioxidant. Different cell disruption methods were applied for efficient astaxanthin extraction. Mechanical disruption of cells via ultrasonication resulted in the highest astaxanthin yield, from 26.78±1.25μgg-1 to 156.07±4.16μgg-1. Optimization of ultrasonication process using response surface methodology resulted into significant decrease in lysis time from 30min to 10min. This strain can be used for concurrent production of lipids and high value co-products such as DHA and astaxanthin.

Experimental and stochastic approaches to assessing the strain demand of pipelines and flexibility requirements for coatings

A criterion for selecting a coating for an energy pipeline is that the coating should have a suitable flexibility to meet the high strain demand during hydrostatic testing and during field bending. This requires knowledge of the level of strain demand for the pipeline, and also the maximum strain that could be
tolerated by the coating system. Whereas average strains imposed during manufacturing and construction are reasonably well predicted, there is insufficient understanding on the factors leading to localised deformation of the pipe. Significant work has been carried out in the past to develop tests for assessing
the coatings’ ability to handle a certain amount of strain based on bend testing, tensile testing and burst testing. However, there is a concern as to whether these tests properly represent localised micro-strains associated with construction activities including field bending and pressure testing, particularly pressure testing of pipelines designed for operation at 80% of specified minimum yield strength (SMYS). Consequently coatings considered "suitable" for modern pipelines may fail. The first issue discussed in this paper is main factors affecting strain localisation. The non-deterministic distributions of heterogeneities over the pipe provide a ground to consider the mechanisms of localisation as a stochastic process. An approach is proposed to quantify the maximum localised strain demand through cold field bending and hydrostatic experiments. Another issue discussed in this paper is the experimental assessment of coating flexibility under the effects of localised strains. Preliminary mandrel tests have been carried out to assess the uniformity of the imposed strain. Although mandrel testing has been shown to be a useful method for relative comparison of coating flexibility, it has several weaknesses that could significantly affect the reliability and reproducibility of the results.

Study on yield function and plastic potential under non-associated flow for accurate earing prediction in cup drawing

Prediction of more than four ears in a cup drawing process can be successfully achieved by considering r-value and stress directionalities. Yld2004-18p based on associated flow rule and Yld2000-2D based on non-associated flow rule are the examples. The former, however, is more costly in terms of computational efficiency than the latter. In this work, an anisotropic constitutive model based on non-associated flow rule which combines two different functions, Hill (1948) and Yld2000-2d, is implemented to a user defined material model. The accuracy of the anisotropic directionalities (yield stresses and plastic strain ratios) is evaluated. Simulation of a mini-die cup drawing with a body stock alloy predicted eight ears, in good agreement with the experimental results. The use of Hill (1948) model for the yield function and Yld2000-2d for plastic potential under the framework of non-associated flow rule led to accurate prediction of up to eight ears at the lower computational cost.

Evaluation of yield parameters and nutritional aspects of different strains of oyster (Pleurotus ostreatus) mushroom

The present study investigates the comparison between three different strains of oyster mushroom Pleurotus ostreatus (oyster (local), WC-537, WC-522) regarding to their yield and nutritional aspects. Four different kinds of substrates (corncob, wheat straw, rice straw, and sugarcane bagasse) were used for the growth of oyster. Oyster strain on corncob was found to be the fast mycelial run in comparison with WC-537 and WC-522. WC-522 on sugarcane bagasse showed the slowest mycellial run. Highest number of flushes was produced by oyster strain on each substrate. Number of days for period between flushes for oyster and WC-537 was about equal on corn cob, wheat straw and rice straw i.e. 4-6 days. Number of days taken for maturation of fruiting bodies of oyster and WC-537 was almost equal 6-7 days. In terms of nutritional aspects all strains have almost the same amount of moisture, fat, ash, fiber and protein with small variation. All the strains have protein content of about 20% by weight.